Top 26 ANYCUBIC 3D Printing Filament on Amazon (Verified You can Buy)
Top 1
ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Black
ANYCUBIC
8.2283 x 8.2283 x 1.7717 inches
0.2205 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
1 case of 10 Packs, 10 Count Total
【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey
ANYCUBIC
3D-PLA-BKGY
8.2283 x 8.2283 x 1.7717 inches
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ✅ | ✅ | ✅ |
| MDD 3D | - | ✅ | ✅ | ✅ |
| WDSY 3D | - | ✅ | ✅ | ✅ |
Features
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
Top 3
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black
ANYCUBIC
8.2283 x 8.2283 x 1.7717 inches
0.2205 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| MDD 3D | - | ✅ | ✅ | ✅ |
| ANYCUBIC Official Store | 8,456 | ✅ | ✅ | ✅ |
Features
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
Top 4
ANYCUBIC PLA+ 3D Printer Filament 1.75mm, 1KG, Texture Grey | PLA Plus, High Toughness 3D Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, Reusable Spool
ANYCUBIC
8.2283 x 8.2283 x 1.7717 inches
0.2205 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
1 case of 10 Packs, 10 Count Total
【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
Top 5
ANYCUBIC PLA Filament Refill 1.75mm, 3D Printer Filament, for Reusable Spools, Dimensional Accuracy +/- 0.02mm, Fit with Most Reusable Spools, 1KG, Texture Grey
ANYCUBIC
2.2046 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
Convenient and Economic: The design of the pla filament refill, paired with a reusable spool, enables cyclic reuse. This not only reduces the waste of wire spools and saves costs, but also contributes to protecting the planet.
Ways to Obtain Anycubic Filament Spools: 1. Purchase Anycubic's reusable spools; 2. Reuse your previous spools; 3. Print your own spool from Makeronline.
Top 6
ANYCUBIC Silk PLA Filament 1.75mm, 1KG, Silk Rainbow | Clog-Free Shiny 3D Printer PLA Filament, Silk Texture, Reusable Spool, Print with Most FDM 3D Printers
ANYCUBIC
2.2046 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
Smooth Silky Luster Enhances Prints: Anycubic Silk PLA, its vibrant, radiant colors come alive with exquisite color contrast. The print surface delivers a dazzling, luxurious elegance that’s both captivating and refined. Made to create decorative artwork.
Controllable Luster for Decor & Gift Designs: By adjusting the nozzle temperature and print speed. You can transform your models into works of brilliance. Higher temperatures and slower speeds ensure the filament melts smoothly and seamlessly.
Top 7
Best for Silicone
Anycubic ACE 2 Pro Smart Filament Storage Box for Kobra 3 Max, Kobra 4
ANYCUBIC
14.49 x 11.18 x 9.31 inches
8.1571 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Print-While-Drying for Smooth Finish】Say goodbye to brittle filaments and ruined 3D prints. The ACE 2 Pro combines a sealed storage container with an active 65°C drying oven, allowing you to dry filaments while printing to eliminate moisture-induced surface rough textures, ensuring reliable printing quality.
【Active Moisture Control & Sealed Storage】Built-in temperature and humidity sensors monitor chamber conditions in real time. Powered by an electronic valve that actively evacuates moisture and a tight silicone sealing ring, it creates an airtight defense shield, protecting your delicate materials from humidity long-term.
Top 8
ANYCUBIC PETG Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, Exceptional Toughness and Long-Lasting Print with Most FDM 3D Printers, 1KG Reusable Spool, Black
ANYCUBIC
8.2283 x 8.2283 x 1.7717 inches
0.2205 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Clear and Vibrant】With a vibrant and vivid hue, the prints of Anycubic PETG 3D Printer Filament feature a smooth and delicate surface finish. They exhibit excellent clarity, appearing either semi-transparent or fully transparent when illuminated. This imparts a clear and aesthetically pleasing appearance to the models.
【Durable & Impact-resist】ANYCUBIC PETG Filament combines the PLA's ease of printing with the toughness of ABS. With impact resistance twice that of standard PLA. Models maintain structural integrity even when dropped or under stress. Making it an excellent choice for toys, chassis, and mechanical prototypes.
Top 9
ANYCUBIC High Speed 3D Printer Filament 1.75mm, Print Up to 10X Faster, Rapid PLA Filament with High Prints Quality, Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool, Black
ANYCUBIC
8.2283 x 8.2283 x 1.7717 inches
0.2205 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Speed with High-Speed Core】 Anycubic High Speed 3D Printer Filament is up to 10X faster output pairing with the high speed 3D printer. Perfect for high-speed 3D printing. The High Speed PLA supports a maximum speed of 500mm/s, compared to the standard printing speed of 50mm/s. Please set the nozzle temperature according to the printing speed, "180-210℃ 50-150mm/s", "210-230℃ 150-300mm/s", "230-260℃ 300-600mm/s".
【High Fluidity, Rapid Shaping】 Compared to standard PLA filaments, Anycubic High-Speed PLA Filaments boast enhanced fluidity and better cooling effect, ensuring smooth and consistent feeding for filaments after melting and rapid model cooling and shaping.
Top 10
ANYCUBIC PLA Plus (PLA+), 3D Printer Filament 1.75mm Bundle, High Toughness, 1KG Spool, Black, White, Texture Grey, Pink, Red, Blue, Green, Orange, Yellow, Purple, 10KG in Total
ANYCUBIC
22.0462 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Efficiency with Intelligent ldentification】Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
Top 11
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), White
ANYCUBIC
8.2283 x 8.2283 x 1.7717 inches
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| MDD 3D | - | ✅ | ✅ | ✅ |
| ANYCUBIC Official Store | 8,456 | ✅ | ✅ | ✅ |
Features
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
Top 12
ANYCUBIC PLA 3D Printer Filament 1.75mm, Translucent Purple, 1KG | Dimensional Accuracy +/- 0.02mm, 3D Printing PLA Filament, Reusable Spool, Fits for Most FDM 3D Printers
ANYCUBIC
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Efficiency with Intelligent ldentification】Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
【Accuracy & Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
Top 13
ANYCUBIC PLA Plus (PLA+), 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Dazzling Blue
ANYCUBIC
8.2677 x 8.2677 x 3.1496 inches
2.2046 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Efficiency with Intelligent ldentification】Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
Top 14
ANYCUBIC PLA Plus (PLA+), 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Reusable Spool, White
ANYCUBIC
8.22 x 8.22 x 2.87 Inches
0.2205 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
【High Dimensional Accuracy】The winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of +/-0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
Top 15
ANYCUBIC PLA+ 3D Printer Filament 1.75mm, 1KG, Yellow | PLA Plus, High Toughness 3D Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, Reusable Spool
ANYCUBIC
2.2046 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Efficiency with Intelligent ldentification】Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
Top 16
Best for PLA
ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), 4KG Black + White + Blue + Red
ANYCUBIC
8.8185 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Efficiency with Intelligent ldentification】Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
【Accuracy & Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
Top 17
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), Beige Pla, Mia Pink, Ideal Skin Tone Pls for Action Figures & Dolls
ANYCUBIC
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Efficiency with Intelligent ldentification】Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
【Accuracy & Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
Top 18
Anycubic ACE 2 Pro Filament Dryer Box, 4-Spool Printing with 65°C Active Drying, Quad Brushless Motors, Smart Identification, Automated Filament Box for Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra 4
ANYCUBIC
14.49 x 11.18 x 9.31 inches
8.1571 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Multi-Color Printing】Expand your creative boundaries. The Anycubic ACE 2 Pro starts as a smooth and automatic filament swapping. Perfect for rendering complex multi-color 3D models with rich, smooth gradients.
【Fast Swapping & Quad Brushless Motors】Equipped with 4 independent brushless motors (lifespan ≥5000 hours) and an upgraded buffering mechanism, it delivers a 50mm/s feed rate—100% faster than older versions. Cuts filament change time by 33.33%, saving up to 47 minutes per 100 swaps to maximize printing efficiency.
Top 19
ANYCUBIC PLA Filament Refill 1.75mm, 3D Printer Filament, for Reusable Spools, Dimensional Accuracy +/- 0.02mm, Fit with Most Reusable Spools, 1KG, Black
ANYCUBIC
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
Convenient and Economic: The design of the pla filament refill, paired with a reusable spool, enables cyclic reuse. This not only reduces the waste of wire spools and saves costs, but also contributes to protecting the planet.
Ways to Obtain Anycubic Filament Spools: 1. Purchase Anycubic's reusable spools; 2. Reuse your previous spools; 3. Print your own spool from Makeronline.
Top 20
ANYCUBIC TPU Filament 1.75mm, 95A Soft Flexible 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, Print with Most FDM 3D Printers, 1KG Spool, Black
ANYCUBIC
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Soft and Highly Flexible】With a rubber-like texture and a comfortable touch, Anycubic TPU Filament is highly flexible and can bend at any angle, making it ideal for printing flexible models, such as insoles, phone cases, and wristbands.
【Strong and Durable】Anycubic TPU delivers unparalleled toughness and tear resistance, outperforming conventional materials. Applicable for industrial applications that require durability such as gears and bearings.
Top 21
ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), 4KG Blue + Green + Orange + Yellow
ANYCUBIC
8.8185 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Boosting Efficiency with Intelligent ldentification】Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
【Accuracy & Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
Top 22
ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Clear, 1kg)
ANYCUBIC
POT067
4.3307 x 4.3307 x 10.315 Inches
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.
Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
Top 23
ANYCUBIC PLA Plus Filament Refill, 3D Printer Filament, for Reusable Spools, Dimensional Accuracy +/- 0.02mm, Fit with Most Reusable Spools, 1KG, Texture Gray
ANYCUBIC
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
Convenient & Budget-friendly: Biodegradable starch-based filaments pair seamlessly with reusable spools for a greener 3D printing experience.
Ways to Obtain Anycubic Filament Spools: ① Purchase Anycubic's reusable spools. ② Reuse your previous spools. ③ Print your own spool from Makeronline.
Top 24
Best 3D Printing Liquid
ANYCUBIC Tough Resin 2.0, 3D Printer Resin with Upgraded High Toughness and High Precision, 365-405nm Fast Curing 3D Resin for 4K 8K LCD/DLP/SLA 3D Printing (Grey, 1kg)
ANYCUBIC
2.2046 pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
【Exceptional Toughness, Resistant to Breakage】 ANYCUBIC Tough Resin 2.0 has undergone a comprehensive upgrade in terms of flexural strength. It demonstrates enhanced toughness, making it less prone to fracture when printing miniature components and thin models.
【Strong Elongation, High Flexibility】 ANYCUBIC Flexible Tough Resin 2.0 exhibits formidable strength and flexibility, effectively resisting peeling, cracking, and stress marks caused by cyclic vibrations. Models are less prone to breakage even when dropped from a height.
Top 25
ANYCUBIC Reusable Filament Spool, Detachable & Easy to Use, Replacement Spool, 196 x 67mm, Fit for All 3D Filament
ANYCUBIC
S010347-0806-US
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
Reusable Filament Spool, Reduce Waste: Anycubic reusable spools use ABS materials to enhance durability and prolong their lifespan.
Secure Locking Mechanism: The redesigned threads provide better fixation of flanges to prevent filament entanglement and printing errors.
Top 26
ANYCUBIC PLA Plus (PLA+), RFID 3D Printer Filament 1.75mm, High Toughness Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, Reusable Spool, 1KG, Purple
ANYCUBIC
2.2046 Pounds
Ratings for ANYCUBIC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 8,456 | ❌ | ❌ | ❌ |
Features
ANYCUBIC PLA Plus (PLA+), RFID 3D Printer Filament 1.75mm, High Toughness Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, Reusable Spool, 1KG, Purple Opulence
Top 10 ANYCUBIC 3D Printing Filament - Verified to Buy (October 2026)
- 1. ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.75mm, High Toughness...
- 2. ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm...
- 3. ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm...
- 4. ANYCUBIC PLA+ 3D Printer Filament 1.75mm, 1KG, Texture Grey |...
- 5. ANYCUBIC PLA Filament Refill 1.75mm, 3D Printer Filament, for Reusable...
- 6. ANYCUBIC Silk PLA Filament 1.75mm, 1KG, Silk Rainbow | Clog-Free...
- 7. Anycubic ACE 2 Pro Smart Filament Storage Box for Kobra...
- 8. ANYCUBIC PETG Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/-...
- 9. ANYCUBIC High Speed 3D Printer Filament 1.75mm, Print Up to...
- 10. ANYCUBIC PLA Plus (PLA+), 3D Printer Filament 1.75mm Bundle, High...
Related ANYCUBIC 3D Printing Filament Guides
For more personalized ANYCUBIC 3D Printing Filament guides, Check those pages,
Featured Brands
[Get] ANYCUBIC 3D Printing Filament Deals (✅Exclusively for Prime)
What does "Amazon Fulfilled" Mean?
Amazon Fulfilled refers to products handled by Amazon's logistics, which indicates that the product is stored, packed, and shipped by Amazon from one of its fulfillment centers.
When you order a product that is "Amazon Fulfilled," Amazon takes care of the storage, packing, shipping, and customer service for that product. This often ensures quicker delivery and better customer service compared to products that are not fulfilled by Amazon. It also means that the product is eligible for Amazon's return policy.
What does "Prime" Mean?
"Prime" refers to Amazon Prime Member (Join Amazon Prime Now), which indicates eligibility for Prime benefits. When you see "Prime" next to a product on Amazon, This generally means that if you are an Amazon Prime member, you can get free two-day shipping on that product, and sometimes even same-day or one-day shipping depending on your location.
Prime members also have access to other benefits, including 2-Day Shipping, Exclusive Member Deals, Prime Video, Buy With Prime, Amazon Music, Prime Gaming, and more.
Shop Prime ANYCUBIC 3D Printing Filament Deals
What does "Free Shipping" Mean?
"Free Shipping" means that you will not be charged additional fees for the shipping of that product. However, unlike "Prime," which usually guarantees fast two-day shipping, "Free Shipping" doesn't necessarily mean fast shipping.
Sometimes there might be a minimum purchase requirement to qualify for free shipping if you are not a Prime member. For Prime members, the "Free Shipping" usually refers to the free two-day shipping that is one of the benefits of the Prime membership.
Why Should You Trust Us?
Now hundreds and thousands of Additive Manufacturing Products supplies are available on Amazon, Picking the right one is not easy, and that may take a lot of your time, Right? and What is the best ANYCUBIC 3D Printing Filament to buy for new October 2026?
CherryPicks’s Methodology for Evaluating ANYCUBIC 3D Printing Filament
We developed the CherryRatings-AI system to identify and score reviews and the CherryPicks-AI ranking system that uses TensorFlow framework to generate the best list, It will help us evaluate Additive Manufacturing Products items that sell on Amazon. The score of items is based on over ten parameters such as analyzing customer review content, product reviewing rating statistics, brand reputation evaluation, comparing product price with features, etc, You can visit How We Rank to learn more in detail.
We collected and analyzed 110 of ANYCUBIC 3D Printing Filament reviews based on our selection criteria. It helped us shortlist the top qualified and rated ANYCUBIC 3D Printing Filament for Additive Manufacturing Products, We found that most customers choose ANYCUBIC 3D Printing Filament with an average price of $39.35, and the top brands are ANYCUBIC.
Then our expert-level editors reviewed all those quality items and selected the top 26 ANYCUBIC 3D Printing Filament for you, We have researched hundreds of sellers and picked the top sellers for Additive Manufacturing Products, including ANYCUBIC Official Store. The ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.... are available for purchase right now, and The seller of #1 rank product has received honest feedback from 250 consumers with an average rating of 4.5.
We've helped a lot of satisfied users get the right Industrial & Scientific product based on their needs, and save lots of time for them to pick ANYCUBIC 3D Printing Filament to buy.
Thomas Joseph has over 7 years of working experience with a reputation science laboratory. He is a father, a writer, and a pet lover. He would be sharing his expert knowledge on Industrial and scientific equipment to help us make the right purchase.