Top 15 ANYCUBIC Products On Amazon (Verified to buy)
Top 1
ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin, High Precision & Rapid Photopolymer for LCD/DLP/SLA 3D Printing (Black, 1kg)
ANYCUBIC
0.7874 x 1.1811 x 0.5 Inches
2.2046 Pounds
- Unknown: German
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 500g)
ANYCUBIC
POT016
1.1 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
| XSspace | - | ✅ | ✅ | ✅ |
| ZZN 3D | - | ✅ | ✅ | ✅ |
Features
Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
Top 3
ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 1kg)
ANYCUBIC
Photon S
11.0236 x 4.7244 x 4.7244 Inches
0.0006 Pounds
- Unknown: German
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
ANYCUBIC Kobra 2 3D Printer, 6X Faster Firmware Upgrades 300mm/s Max Print Speed LeviQ 2.0 Auto Leveling with Dual-Gear Extrusion System Efficient Precise Delivery Fully Open Source 8.7"x8.7"x9.84"
ANYCUBIC
19.13 x 19.13 x 16.93 inches
18.5188 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
【Save Time with 6X Faster Printing】Anycubic Kobra 2 Firmware Upgrades. Save time up to 76% when printing a same-sized model at a recommended speed. The Maximum Print Speed is 300mm/s, Recommended Print speed is 200mm/s, Accelerated Speed is 3000mm/s².【Fast and Precise Leveling】Brand new upgraded LeviQ 2.0 Automatic Leveling System in combination with tailored modular realize smart offset to the Z-axis without manual adjustment. Z-Offset can be customed to cater to various printing needs.
Anycubic Kobra Plus, Large 3D Printer Auto Leveling with Smart Precise 25 Point Leveling and All Metal Geared Extruder for Smooth Filament in and Out, Large Build Volume 13.8''x11.8''x11.8''
ANYCUBIC
Anycubic Kobra Plus
11.8 x 11.8 x 13.8 inches
24.2508 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience.Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting.
Top 6
ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Anycubic Photon Mono 4K 2 LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box, Wash Size 4.72x2.91x6.49
ANYCUBIC
ANYCUBIC-WASH-CURE
8.8583 x 8.6614 x 14.8819 Inches
0.0006 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
| ZZN 3D | - | ✅ | ✅ | ✅ |
Features
Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs
Top 7
ANYCUBIC Wash and Cure Plus, Largest 2 in 1 Wash Cure Machine for Saturn Mono X LCD SLA DLP 3D Printer Models with L-Shaped Strip Curing Light and Washing Size 192mm(L) x 120mm(W) x 290mm(H)
ANYCUBIC
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
| CLQ 3D | - | ✅ | ✅ | ✅ |
| WDSY 3D | - | ✅ | ✅ | ✅ |
Features
【2-In-1 Wash and Cure Station】 Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing; A professional solution to the messy clean up job of your fabulous prints【Largest Wash Cure Station】It has a large washing volume of 192mm(L) x 120mm(W) x 290mm(H) and curing volume of 190mm(D) x 245mm(H), so you can wash cure models printed by large resin printers such as Photon Mono X, which can dramatically simplify messy post-processing
Top 8
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black
ANYCUBIC
2.2046 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
| MDD 3D | - | ✅ | ✅ | ✅ |
Features
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
Top 9
Best for 1.75 mm
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Blue
ANYCUBIC
4.22 x 4.22 x 2.87 Inches
2.2046 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
Top 10
Best for PTFE
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), White
ANYCUBIC
2.2046 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
| MDD 3D | - | ✅ | ✅ | ✅ |
Features
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey
ANYCUBIC
3D-PLA-BKGY
2.2046 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
| WDSY 3D | - | ✅ | ✅ | ✅ |
| MDD 3D | - | ✅ | ✅ | ✅ |
Features
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
Anycubic Kobra Max, Large 3D Printer Auto Leveling Pre-Installed with Stable Double Z-axis and Faster Printing Speed, Fully Open Source Easy to Use for Beginners Printing Size 400x400x450cm
ANYCUBIC
26.0 x 28.0 x 26.0 inches
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
Spacious Build Volume: With a build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, the ANYCUBIC KOBRA MAX 3D Printer offers ample room for everyday printing needs and allows for greater design flexibility.Precision Leveling: Our innovative auto-leveling function provides 25-point calibration and compensation for unevenness, delivering precise printer bed leveling that ensures consistently high-quality prints.
Anycubic Kobra 3D Printer Auto Leveling, FDM 3D Printers with Self-Developed ANYCUBIC LeviQ Leveling and Removable Magnetic Platform for DIY Home School Printing Size 8.7x8.7x9.84 inch
ANYCUBIC
Anycubic Kobra
19.1339 x 19.1339 x 16.9291 inches
15.4324 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
Modular Design & Easy Assembly: ANYCUBIC KOBRA is an all-in-one frame 3D printer, can minimize the shaking to improve the print quality. The modular design allows the printer to be assembled only in 10 minutesIntelligent Auto Leveling 3d printer: ANYCUBIC KOBRA captured with the Self-developed Anycubic LeviQ Leveling Function equipped with 25-point precise leveling up, which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling, providing you with a more intelligent printing experience.
Top 14
Best for High-Speed
ANYCUBIC Photon Mono M5s 12K Resin 3D Printer, with Smart Leveling-Free, 3X Faster Printing Speed, 10.1" Monochrome LCD Screen, Printing Size of 7.87" x 8.58" x 4.84" (HWD), Add The High-Speed Resin
ANYCUBIC
13.83 x 13.83 x 22.0 inches
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
【12K Exquisite Details】Anycubic Photon Mono M5s has a 10.1 inch 12K monochrome LCD screen with a resolution of 11520*5120, achieving an X accuracy of 19 microns. It can print with exceptional detail, as fine as a human hair. The contrast ratio is 480:1, making models have sharp edges and distinct contours.【Leveling-Free】Anycubic pioneered the consumer grade leveling free resin 3D printer. During printing, the mechanical sensor on the cantilever arm detects the fit between the printing platform and the floating leveling module and automatically adjusts it based on the detection results. This eliminates the risk of leveling failure and improves printing success rate
ANYCUBIC 4K + Resin 3D Printer, Photon Mono X2 3D Printer with 9.1 in Mono LCD Screen, Quality LighTubro Light Source, High Precision & Stability, Large Printing Size 197 x 123 x 200 mm
ANYCUBIC
13.8 x 13.4 x 20.5 inches
15.6 pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ANYCUBIC Official Store | 4,987 | ✅ | ✅ | ✅ |
Features
【4K+ HD Resolution】, Anycubic Photon Mono X2 adopts 4096 x 2560 4K+ high resolution, ensures vivid reproduction of 3d model. Compared with ordinary RGB screen, the 9.1-inch monochrome screen not only prolongs the life of the screen, but also meets the printing needs of large-size models【Uniform Light Source】Equipped with an improved ANYCUBIC Light Turbo matrix light source, it can project the UV light both parallel and perpendicular to the LCD screen, offering a much more uniform light exposure, thus improving the quality of 3d printing models.
Our ANYCUBIC Review
ANYCUBIC products on Amazon (April 2024)
What to buy from ANYCUBIC?
ANYCUBIC sell products mainly in the Industrial & Scientific category.
Its popular products on Amazon include PTFE 3D Printing Filament,Wood-Plastic Composite 3D Printing Filament And 1.75 mm 3D Printing Filament.
If you intend to buy any of these products, then you can find them easily on Amazon.
Featured Reviews Related to ANYCUBIC
14,923 Reviews Analyzed
4,557 Reviews Analyzed
69 Reviews Analyzed
48,513 Reviews Analyzed
49,624 Reviews Analyzed
47,516 Reviews Analyzed
44,367 Reviews Analyzed
45,360 Reviews Analyzed
18,824 Reviews Analyzed
ANYCUBIC Pricing
The brand has over 85 products listed on Amazon with a price range of $9.99 to $1,399.99 form our picks.
Currently, the average price of their product is $247.96 which is considered affordable. You can make your choice from the list of products offered by the ANYCUBIC.
Is ANYCUBIC a good brand?
A brand is an essential factor when making a purchase. What do we think about the ANYCUBIC? Well, according to the information available on Amazon, ANYCUBIC products are sold by ANYCUBIC Official Store.
The seller has received about 1,040 feedbacks from buyers with an average start rating of 4.9. With a rating as this from the number of feedbacks, we can conclude that ANYCUBIC is the brand is exceptional good, and their products are highly recommended as most consumers were delighted making use of the products from ANYCUBIC.
Can I know who the owner of ANYCUBIC is?
ANYCUBIC is selling on Amazon's North America Marketplaces. You can find out the actual owner of the brand at https://www.uspto.gov/trademarks/search.
From there, you can tell whether Amazon owns the brand or not. If you want to buy Amazon branded products, you can go here, and list some of their top brands. Amazon owns 100 private-label brands that operate in different markets.
Related Amazon Store for ANYCUBIC
4.9(1,040 ratings)
4.9(176 ratings)
4.8(56 ratings)
4.9(120 ratings)
Methodology
How We Evaluated ANYCUBIC Products
We are crawling & scraping a large amount of data from 85 ANYCUBIC products and a countless number of reviews, you can gain valuable insights to enhance your understanding of various aspects related to ANYCUBIC, and you can use those data to help you make informed buying PTFE 3D Printing Filament,Wood-Plastic Composite 3D Printing Filament And 1.75 mm 3D Printing Filament decisions. Those recommend the 15 best products from ANYCUBIC based on thorough analysis and research by our CherryPicks-AI ranking system.
Why create this buying guide?
Our brand guide is designed to provide up-to-date & unbiased information about ANYCUBIC products. Our goal is to empower you with data-driven insights, enabling you to make better shopping decisions efficiently to save time. We prioritize earning your trust by providing reliable information and guidance.
Top 10 ANYCUBIC Sellers: CPR Seller Rank List
CPR sellers rank is based on CherryPicks-AI bestselling ranking system that helps us analyze each seller's sales trends. The List of top seller ranks is our in-house data, essential for our product ranking to help you make the right shopping choice.
- 1. ANYCUBIC Official Store : 1,040 Yearly Feedback , Avg. Ratings 4.9
- 2. WiJorlan : 176 Yearly Feedback , Avg. Ratings 4.9
- 3. ZZN 3D : 120 Yearly Feedback , Avg. Ratings 4.9
- 4. SENDAXN : 67 Yearly Feedback , Avg. Ratings 4.9
- 5. WDSY 3D : 58 Yearly Feedback , Avg. Ratings 4.9
- 6. Wdec 3D : 56 Yearly Feedback , Avg. Ratings 4.8
- 7. MDD 3D : 49 Yearly Feedback , Avg. Ratings 4.9
- 8. XSspace : 49 Yearly Feedback , Avg. Ratings 4.9
- 9. 3DTOP : 28 Yearly Feedback , Avg. Ratings 4.8
- 10. CLQ 3D : 20 Yearly Feedback , Avg. Ratings 4.9
| Rank | Name | Yearly Feedbacks | Avg. Ratings |
|---|---|---|---|
| 🥇 | ANYCUBIC Official Store | 1,040 | 4.9 |
| 🥈 | WiJorlan | 176 | 4.9 |
| 🥉 | ZZN 3D | 120 | 4.9 |
| 4 | SENDAXN | 67 | 4.9 |
| 5 | WDSY 3D | 58 | 4.9 |
| 6 | Wdec 3D | 56 | 4.8 |
| 7 | MDD 3D | 49 | 4.9 |
| 8 | XSspace | 49 | 4.9 |
| 9 | 3DTOP | 28 | 4.8 |
| 10 | CLQ 3D | 20 | 4.9 |