Top 30 Puller Sets on Amazon (Verified You can Buy)
Top 1
GEARWRENCH 10 Way Slide Hammer Puller Set - 41700D
GEARWRENCH
41700D
23.6 x 9.6 x 4.1 Inches
0.3307 Pounds
Ratings for GEARWRENCH (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
Features
Provides a wide range of puller applications such as: flange type axles, oil seals and other press fit parts
Jaws can be set up for 2 or 3 jaw
Top 2
Best Pullers
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627
GEARWRENCH
3627
11.5 x 7.9 x 2.0 Inches
5.13 Pounds
Ratings for GEARWRENCH (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| National Tool Warehouse | 1,751 | ❌ | ❌ | ❌ |
Features
Ratcheting pullers have a time-saving, indexing jaw design
Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help
Top 3
OTC 4579 9-Way Slide Hammer Puller Set , Black
OTC
4579
23.7992 x 9.9016 x 4.2008 Inches
17.2 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| Tooldom Tools | - | ❌ | ❌ | ❌ |
| ShoppersParadiseDiscount | - | ❌ | ❌ | ❌ |
Features
OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs
Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals
Top 4
8MILELAKE 14PCS Bearing Separator Puller Set Heavy Duty 5-Ton Capacity 2inches and 3inches Splitters Remove Bearings Kit
8MILELAKE
Puller
14.9606 x 3.1496 x 10.6299 Inches
Ratings for 8MILELAKE (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Freebird Trading | 6,746 | ✅ | ✅ | ✅ |
Features
2 inches and 3 inches bearing separators
Drop forged and heat treated.
Top 5
ARES 71000-43-Piece Harmonic Balancer Puller Set - Use with Harmonic Balancers, Steering Wheels, Crankshaft Pulleys and Gears - Works with Most Cars, Pickups, and SUVs
ARES
4350276853
Ratings for ARES (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ARES TOOL | 1,588 | ✅ | ✅ | ✅ |
Features
INCLUDES: (1) 3/4" Center x 4-1/4" Diameter Heavy-Duty 4-Way Slotted Puller Yoke; (1) 3/4"-16UNF x 5-3/8" and (1) 3/4"-16UNF x 2-3/4" Grade 5 Hardened Live-Center Forcing Screw; (3) 5/16"-24 UNF x 3" Grade 8 Stepped Bolts; (3) each: 8mm x 1.25 x 90mm, 8mm x 1.25 x 45mm, 1/4"-28UNF x 3", 8mm x 1.25 x 65mm, 5/16"-24UNF x 3", 5/16"-18UNC x 3.5", 3/8"-24UNF x 1.5", 3/8"-16UNC x 2", 3/8"-16UNC x 3", 3/8"-16UNC x 4.5", and 10mm x 1.5 x 35mm Grade 8 Washer Head Bolts
QUALITY: The forged 4-way slotted puller yoke includes two lengths of Grade 5 hardened forcing screws and a set of 4 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening. The screws and washers feature premium hardened steel construction, and thanks to the high quality blow molded case, you'll never have to worry about misplacing any of them on the job.
Top 6
Best Pullers
Neilsen Gear Hub Pulley Puller Bearing Separator Internal External 2 jaw and 3 jaw puller 3" 4" 6" 8 , Bearing Puller Gear Puller Suitable for Remove of Gears, Hubs, Ball Races, Bearings and Pulleys
VKALTUL
17.7165 x 13.7795 x 3.937 Inches
Ratings for VKALTUL (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| VKALTUL | - | ✅ | ✅ | ✅ |
Features
【POWERFUL FUNCTION】Professional tool for commercial or occasional use.High quality general purpose puller set for gears, pulleys and hubs etc.
【Suitable For】Suitable for the removal of gears, hubs, ball races, bearings, pulleys and sprockets,Even can be used for flywheels on small engines like found in outboards, lawn mowers etc.
Top 7
OMT 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit
Orion Motor Tech
000200
23.62 x 8.66 x 4.72 Inches
Ratings for Orion Motor Tech (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Orion Motor Tech Direct | 649 | ✅ | ✅ | ✅ |
Features
VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 4 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs.
Top 8
CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers
CARTMAN
8542036010
11.81 x 3.54 x 1.97 Inches
1.54 Pounds
Ratings for CARTMAN (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Cartman | 978 | ✅ | ✅ | ✅ |
Features
Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes; 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread; Front Hub puller, Rear Axle puller, Locknut Cone; Dent puller screws (large and small), Supplied in blow mold storage case.
Features: Internal and External Three Leg and Two Leg jaw puller yokes.
Top 9
Best Pullers
ARES 71002 - Harmonic Balancer Puller Set - Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator - Storage Case Included
ARES
8542036071
Ratings for ARES (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ARES TOOL | 1,588 | ✅ | ✅ | ✅ |
Features
ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.
INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!
Top 10
OTC 7793 Master Bolt Grip Set - Flange Type Puller with Grade 8 Hardware
OTC
7793
16.0 x 7.0 x 11.0 Inches
8.3 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| Nygmat | 8,354 | ❌ | ❌ | ❌ |
Features
Multi-purpose applications such as steering wheels, flywheels, harmonic balancers, pulleys and gears with tapped holes
Includes special stepped bolts for 1990-2005 GM 3300-3800 V6 crankshaft pulleys
Top 11
OTC Puller Set, 11 Pieces, Multipurpose, 2 Jaws - 4532
OTC
4532
17.5 x 12.0 x 2.0 Inches
8.1 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| JBTools | 241 | ❌ | ❌ | ❌ |
Features
Push puller is the best pulling choice when threaded holes are not available
Great solution for many applications like: heavy-duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, harmonic balancers, and more
Top 12
OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case
OTC
7948
27.25 x 14.0 x 5.75 Inches
22.2 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| Norex Supply - Save up to 70% on everything! | - | ❌ | ❌ | ❌ |
Features
OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts
Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility
Top 13
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Short/Long Leg Puller, 5 Ton - 3628D
GEARWRENCH
3628D
8.38 x 11.5 x 2.0 Inches
6.22 Pounds
Ratings for GEARWRENCH (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| MHS Inc | - | ❌ | ❌ | ❌ |
Features
Since our 1919 beginning, KD Tools has been driven by innovation.
From our first specialty tool, the Model-T valve spring lifter, to our latest Ratcheting Puller, we've built our reputation with tools that make tough jobs easy.
Top 14
OMT Slide Hammer, 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers
Orion Motor Tech
0002BK
24.0 x 9.0 x 5.0 Inches
17.0 Pounds
Ratings for Orion Motor Tech (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Orion Motor Tech Direct | 649 | ✅ | ✅ | ✅ |
Features
VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs.
Top 15
Stanley Proto J4234B 10 Ton -Ease 2-Way Straight Jaw Puller Set
Proto
J4234B
1.0 x 1.0 x 1.0 Inches
15.57 Pounds
Ratings for Proto (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Nygmat | 8,354 | ❌ | ❌ | ❌ |
Features
12 Piece 10 Ton -Ease 2-Way Straight Jaw Puller Set
12 Piece 10 Ton -Ease 2-Way Straight Jaw Puller Set
Top 16
Powerbuilt Master Axle Puller Tool Set, Remove Car Front and Rear, Bearings and Seals, Vehicle Repair 21 Piece Kit - 648611
Powerbuilt
648611
24.75 x 9.5 x 6.75 Inches
19.54 Pounds
Ratings for Powerbuilt (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
Features
Made to be the most reliable tools in the market today
Tool solutions for most all situations
Top 17
OTC Puller Set, Bar, 5 Ton, 13 Pieces
OTC
4518
10.1 x 2.9 x 16.0 Inches
0.0111 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| National Tool Warehouse | 1,751 | ❌ | ❌ | ❌ |
Features
Separator tools are used with bar puller and legs for a wide variety of pulling jobs
Includes the two most popular bearing splitters - 2 inch and 3 inch - plus four sets of hex push puller legs
Top 18
Stark 4-Pieces Jaw Gear Puller Set (3-inch, 4-inch, 6-inch and 8-inch) Removal Bundle Set for Pulley, Slide Gears, and Flywheel
Stark USA
Ratings for Stark USA (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ihubdeal | 1,358 | ✅ | ✅ | ✅ |
Features
Multi-Position Design - Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility
Damage-Free Removal - Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
Top 19
OTC 6540 Rear Axle Bearing Puller Set - 8 Piece
OTC
6540
27.0 x 13.0 x 10.0 Inches
3.0 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| Autoplicity ✅ | 1,125 | ❌ | ❌ | ❌ |
| Tool Shack | - | ❌ | ❌ | ❌ |
Features
Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks
Includes 3 sizes of rear axle bearing pullers
Top 20
VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating
VCT
9.0 x 5.0 x 3.0 Inches
Ratings for VCT (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| JR Quality Tools | 8,387 | ✅ | ✅ | ✅ |
Features
EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out; The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle; These tools make the job simple and prevent damage to your bearings when pulling; Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings; For removal only, not intended for installation
Top 21
OTC 4581 Slide Hammer and Blind Hole Bearing Puller Set
OTC
4581
17.0 x 10.0 x 2.9 Inches
8.0 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
| JBTools | 241 | ❌ | ❌ | ❌ |
| Autoplicity ✅ | 1,125 | ❌ | ❌ | ❌ |
Features
The OTC blind hole bearing puller set is for those jobs requiring an internal pull
set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications
Top 22
GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set - 41710
GEARWRENCH
41710
12.0 x 6.0 x 2.5 Inches
4.0 Pounds
Ratings for GEARWRENCH (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
Features
Three pullers designed to make the removal of semi-floating rear axle bearings easier
1" x 1-7/8" puller
Top 23
8MILELAKE Rear Axle Bearing Puller Extractor Installer Set Axle Bearing Removal Remover Tool Kit
8MILELAKE
Puller
Ratings for 8MILELAKE (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Freebird Trading | 6,746 | ✅ | ✅ | ✅ |
Features
[APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively.
[EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case.
Top 24
WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set
WINMAX TOOLS AUTOMOTIVE
Ratings for WINMAX TOOLS AUTOMOTIVE (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Car-TOOLS | - | ✅ | ✅ | ✅ |
Features
1 Year Warranty
This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts.
Top 25
Thin Two jaw Bearing Puller/Remover 30mm - 90mm by U.S.PRO Tools AT091
AB Tools-US Pro
AT091
6.6929 x 5.9055 x 1.5748 Inches
Ratings for AB Tools-US Pro (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| AB Tools | - | ✅ | ✅ | ✅ |
| lixin6767 | - | ❌ | ❌ | ❌ |
Features
Special Design for narrow spaces
Working Depth: 93mm
Top 26
Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1" to 2-7/8" IDs
Orion Motor Tech
RA0700
18.0 x 10.0 x 3.0 Inches
10.0 Pounds
Ratings for Orion Motor Tech (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Orion Motor Tech Direct | 649 | ✅ | ✅ | ✅ |
Features
8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks
AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more
Top 27
ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set
ATPEAM
24.0 x 9.0 x 4.0 Inches
Ratings for ATPEAM (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| ATP Technic | - | ✅ | ✅ | ✅ |
Features
Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan.
A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case.
Top 28
Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set
Cal-Van Tools
95400
1.0 x 1.0 x 1.0 Inches
4.6 Pounds
Ratings for Cal-Van Tools (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
Features
Fits the appropriate sized collet over the dowel; tighten the sleeve; use outer sleeve and nut to extract the dowel
Can be used with air ratchet or traditional ratchet
Top 29
OTC PA7 7-Ton Capacity Four-in-One Puller Set
OTC
PA7
17.0 x 13.0 x 2.0 Inches
5.42 Pounds
Ratings for OTC (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Amazon.com | - | ✅ | ✅ | ✅ |
Features
You can quickly assemble a 2/3-jaw puller with standard or long reach
Ideal for hundreds of pulling jobs
Top 30
Stanley Proto J4292B 10 Ton -Ease Wide Puller Set
Proto
J4292B
1.0 x 1.0 x 1.0 Inches
39.0 Pounds
Ratings for Proto (CPR Score)
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| Hugo's Online | - | ❌ | ❌ | ❌ |
Features
10 Ton Proto-Ease wide puller set
Required for large parts with heavy press-fits
Top 10 Puller Sets - Verified to Buy (Apr. 2024)
- 1. GEARWRENCH 10 Way Slide Hammer Puller Set - 41700D
- 2. GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2...
- 3. OTC 4579 9-Way Slide Hammer Puller Set , Black
- 4. 8MILELAKE 14PCS Bearing Separator Puller Set Heavy Duty 5-Ton Capacity...
- 5. ARES 71000-43-Piece Harmonic Balancer Puller Set - Use with Harmonic...
- 6. Neilsen Gear Hub Pulley Puller Bearing Separator Internal External 2...
- 7. OMT 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing...
- 8. CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs,...
- 9. ARES 71002 - Harmonic Balancer Puller Set - Remove Damper...
- 10. OTC 7793 Master Bolt Grip Set - Flange Type Puller...
Top 10 Puller Sets Brands on Amazon
Here is the list of top-rated brands that were evaluated by CherryPicks.
- GEARWRENCH
- OTC
- 8MILELAKE
- ARES
- VKALTUL
- Orion Motor Tech
- CARTMAN
- Proto
- Powerbuilt
- Stark USA
Top 10 Puller Sets Sellers: CPR Seller Rank List
CPR sellers rank is based on CherryPicks-AI bestselling ranking system that helps us analyze each seller's sales trends. The List of top seller ranks is our in-house data, essential for our product ranking to help you make the right shopping choice.
- 1. JBTools : 7,916 Yearly Feedback , Avg. Ratings 4.8
- 2. Orion Motor Tech Direct : 4,171 Yearly Feedback , Avg. Ratings 4.9
- 3. Cartman : 3,206 Yearly Feedback , Avg. Ratings 4.8
- 4. Autoplicity ✅ : 2,948 Yearly Feedback , Avg. Ratings 4.5
- 5. ihubdeal : 2,625 Yearly Feedback , Avg. Ratings 4.7
- 6. ARES TOOL : 2,365 Yearly Feedback , Avg. Ratings 4.9
- 7. National Tool Warehouse : 2,240 Yearly Feedback , Avg. Ratings 4.7
- 8. Freebird Trading : 819 Yearly Feedback , Avg. Ratings 4.9
- 9. Nygmat : 689 Yearly Feedback , Avg. Ratings 4.5
- 10. JR Quality Tools : 687 Yearly Feedback , Avg. Ratings 4.8
| Rank | Name | Yearly Feedbacks | Avg. Ratings |
|---|---|---|---|
| 🥇 | JBTools | 7,916 | 4.8 |
| 🥈 | Orion Motor Tech Direct | 4,171 | 4.9 |
| 🥉 | Cartman | 3,206 | 4.8 |
| 4 | Autoplicity ✅ | 2,948 | 4.5 |
| 5 | ihubdeal | 2,625 | 4.7 |
| 6 | ARES TOOL | 2,365 | 4.9 |
| 7 | National Tool Warehouse | 2,240 | 4.7 |
| 8 | Freebird Trading | 819 | 4.9 |
| 9 | Nygmat | 689 | 4.5 |
| 10 | JR Quality Tools | 687 | 4.8 |
[Get] Puller Sets Deals (✅Exclusively for Prime)
What does "Amazon Fulfilled" Mean?
Amazon Fulfilled refers to products handled by Amazon's logistics, which indicates that the product is stored, packed, and shipped by Amazon from one of its fulfillment centers.
When you order a product that is "Amazon Fulfilled," Amazon takes care of the storage, packing, shipping, and customer service for that product. This often ensures quicker delivery and better customer service compared to products that are not fulfilled by Amazon. It also means that the product is eligible for Amazon's return policy.
What does "Prime" Mean?
"Prime" refers to Amazon Prime Member (Join Amazon Prime Now), which indicates eligibility for Prime benefits. When you see "Prime" next to a product on Amazon, This generally means that if you are an Amazon Prime member, you can get free two-day shipping on that product, and sometimes even same-day or one-day shipping depending on your location.
Prime members also have access to other benefits, including 2-Day Shipping, Exclusive Member Deals, Prime Video, Buy With Prime, Amazon Music, Prime Gaming, and more.
What does "Free Shipping" Mean?
"Free Shipping" means that you will not be charged additional fees for the shipping of that product. However, unlike "Prime," which usually guarantees fast two-day shipping, "Free Shipping" doesn't necessarily mean fast shipping.
Sometimes there might be a minimum purchase requirement to qualify for free shipping if you are not a Prime member. For Prime members, the "Free Shipping" usually refers to the free two-day shipping that is one of the benefits of the Prime membership.
Why Should You Trust Us?
Now hundreds and thousands of Tools & Equipment supplies are available on Amazon, Picking the right one is not easy, and that may take a lot of your time, Right? and What is the best Puller Sets to buy for new April 2024?
CherryPicks’s Methodology for Evaluating Puller Sets
We developed the CherryRatings-AI system to identify and score reviews and the CherryPicks-AI ranking system that uses TensorFlow framework to generate the best list, It will help us evaluate Tools & Equipment items that sell on Amazon. The score of items is based on over ten parameters such as analyzing customer review content, product reviewing rating statistics, brand reputation evaluation, comparing product price with features, etc, You can visit How We Rank to learn more in detail.
We collected and analyzed 407 of Puller Sets reviews based on our selection criteria. It helped us shortlist the top qualified and rated Puller Sets for Tools & Equipment, We found that most customers choose Puller Sets with an average price of $172.36, and the top brands are CARTMAN, Orion Motor Tech, GEARWRENCH, OTC, ARES, Powerbuilt, 8MILELAKE, VCT, ATPEAM, Stark USA, Cal-Van Tools, WINMAX TOOLS AUTOMOTIVE, Proto, VKALTUL And AB Tools-US Pro.
Then our expert-level editors reviewed all those quality items and selected the top 30 Puller Sets for you, We have researched hundreds of sellers and picked the top sellers for Tools & Equipment, including JBTools, Orion Motor Tech Direct, Cartman, Autoplicity ✅, ihubdeal, ARES TOOL, National Tool Warehouse, Freebird Trading, Nygmat, JR Quality Tools, ATP Technic And Car-TOOLS. The GEARWRENCH 10 Way Slide Hammer Puller Set - 41700D are available for purchase right now, and The seller of #1 rank product has received honest feedback from 1,413 consumers with an average rating of 4.8.
We've helped a lot of satisfied users get the right Automotive product based on their needs, and save lots of time for them to pick Puller Sets to buy.
Paulo S. Goncalves is a student of mechanical engineering with hands-on experience in automotive repair — a skill he picked up in his early days. He would be helping you make the best choice regarding automative parts and products here on this site.