Tools & Home Improvement From Yost Vises on Amazon

SWIVEL BASE: Vise head rotates 240° and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.

WARRANTY: Comes with a 1-year limited warranty and 90-day return.

USE WITH: The magnetic jaw covers are great with variety of vises: bench vises, drill press vises, milling vises and so forth; The distance from the outer edges of the magnets is 3-3/4”, allowing jaw covers to be used on a 4" vise up to a 6" vise. If you have a 4” vise, easily trim off the jaw cover excess

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock are secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.

WARRANTY: Comes with a 1-year limited warranty and 90-day return.

Cast steel body is painted black for mild protection against corrosion and has flat portion that acts as a reinforced anvil and an additional work surface

Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip

Main screw that controls the jaws is covered by a bar to protect it from damage

4-3/4-inch Capacity

Jaw faces pre drilled for mounting customer supplied alternative faces: 2" centers, 0.2" hole diameter, 0.65" down from top

360-degree Swivel

Precision Casting for Durability and Smooth Operation

(3) 0.35"D base holes, please use 5/16"D fasteners

Hole center to hole center: 4.75"

Not included: (3) mounting fasteners: 5/16"D

18 pounds

SWIVEL BASE: 360-degree rotatable swivel base with 2 lockdowns.

HOW TO USE: Make sure the vise is securely mounted to the workbench and the swivel base lock is secure. Open vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the handle clockwise until the item is snug in the serrated jaws, and continue to tighten until you can no longer move it. Don't over-tighten as this may damage the item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.

WARRANTY: Comes with a 1-year limited warranty and 90-day return.

USE WITH: The magnetic jaw covers are great with variety of vises: bench vises, drill press vises, milling vises and so forth; The distance from the outer edges of the magnets is 3-3/4”, allowing jaw covers to be used on a 4" vise up to a 6" vise. If you have a 4” vise, easily trim off the jaw cover excess

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock are secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.

WARRANTY: Comes with a 1-year limited warranty and 90-day return.

Specifications: 6” (152mm) vise jaw covers feature groove sizes: Horizontal groove 1/4", 3/8" @ 60° angle, and multiple vertical grooves: 1/4", 1/8", 1/16" and 5/8"

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.

WARRANTY: Comes with a 1-year limited warranty and 90-day return.

Jaw Width: 4" (10.16CM); Jaw Opening: 3" (7.6CM); Throat Depth: 2.1" (5.3CM)

2.5"x2.6" (6.35CM x 6.6CM) polished anvil for tapping work, bending or shaping metal

Cast iron construction (30,000 PSI tensile strength) with replaceable serrated microgroove tooth steel jaws grip parts without slipping,

120-degree Swivel base for rotating the vise featuring 2 lockdowns adjusts the direction of the vise for ease of work positioning

0.56”D (14.3MM) Machined Q235 steel main screw with Acme rolled threads, 6 threads per inch.

0.4”D (10.5MM) Q235 Steel Handle x 5.9”L (15CM)

(3) 5/16” D mounting holes anchor vise securely to workbench, mounting hardware not included

Yost - quality vises since 1908

The magnetic jaw covers are great with variety of vises: bench vises, drill press vises, milling vises and so forth

Ensure you have the correct vise jaw cap width for your vise. Then attach the vise jaw caps over the original vise jaws. The magnets within the vise jaw cap will ensure a strong hold

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer support to back our quality guarantee

The magnetic jaw covers are great with variety of vises: bench vises, drill press vises, milling vises and so forth;

Ensure you have the correct vise jaw cap width for your vise. Then attach the vise jaw caps over the original vise jaws. The magnets within the vise jaw cap will ensure a strong hold.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer support to back our quality guarantee.