Tools & Home Improvement From YDmeet on Amazon

【Simple & Trouble-Free Installation】：The shower diverter with hand shower mount is easy to install. No plumbers required, quick and trouble-free to install with all provided accessories in the package, just follow the installation manual is an easy job to finish in few minutes. A metal slip nut is easy to tighten and adjust the angle or position you want.

【Brass Swivel Handshower Mount】：This shower head diverter valve is designed with an overhead shower mount holder for holding handheld shower securely, no worry about sliding down easily. Made of solid brass material, not breaks easily as plastic. It is rotatable and adjustable with a brass ball joint connector, swivels freely forward or backward in any angle. The card slot is tapered, top diameter is 0.9”, bottom diameter is 0.78”, depth dimater is 1/14”.

【G1/2 Universal Connection】：The 3 way shower diverter is universal G1/2 standard straight threads connection with one G1/2 female water inlet(connects to shower arm) and two G1/2 male water outlets(connect to handheld shower and fixed shower head). Fits universal G1/2(1/2-inch) hand shower and fixed spray head.

【Ergonomic & Humanized Design】：The kitchen sink faucet aerator swivels 360°, freely rotatable at any angle you want for convenience. With a stainless steel extender hose, this movable kitchen tap head allows you flush more rangely each sink corner or cleaning the whole sink more widely. If your sink is shallow, you can use the faucet sprayer head attachment only without attaching the extension hose.

【Environmentally & Energy-Saving】：The faucet booster shower head adjusts water from stream to spray. Water mixed with air provides high pressure water and strong spray, it is effectively saving energy and reducing water consumption, good for environmental protection and energy-saving. Powerful water momentum increase water pressure, making your job become easily and functionally. Water saves up to 30%-70% compared with standard bubble faucets.

【Universal Fit & Package】：Sink faucet attchment, Brass male adapter, 12cm stainless steel hose with aerator, rubber gaskets. Full accessories are included in the package to meet your needs. Easy to install without any tools required. When there is any quality problem, please contact us at the first time, and we will provide professional service and warranty.

【Card Slot Diameter】：The shower head holder nickel is designed with tapered card slot. Its top diameter is 0.9”(23mm), the bottom diameter is 0.78”(20mm), its depter diameter is 1.14”(29mm), fits for shower hose bottom diameter between 0.75inch-0.78inch(19-22mm). Please mind and measure your shower hose bottom diameter before you order. NOT fits for shower hose bottom diameter >=0.9inch(>=23mm). (NOTE: Waterpik Massages Handheld Shower doesn’t work for this shower head wall holder).

【Drill-Free Hand Shower Holder Mount】：Provided with a strong adhesive glue for installation. This adhesive shower head holder is easy to install in just few minutes. No drilling, No screwing needed, No harm to wall surface. The adjustable shower head holder can freely swivel and adjust to maximum of 55° downward to meet you showering needs. When handheld shower holder wall nount at its slot top end, it is parallel to wall surface.

【About Installation】：Before installing handheld shower head holder, first must test and determine your installation height. Apply glue around the bottom edge(Not apply on the holder centre), then press tightly to completely contact the wall surface and use auxiliary sticker to help fix it. Dry for 48 hours after installation until the glue is completely solidified before using. NOT works on uneven/fragile surfaces: Fiber glass/Mirror/Rugged wall/ Concave wall/ Textured wall/ Lime cement.

【Widely Used】：Fits most handheld shower hose for shower hose bottom diameter between 0.75inch-0.78inch(19mm-22mm). (NOTE: Waterpik Brand Handheld Shower or Hose doesn’t work for this shower head wall holder).

【Very Firm＆No Drilling】：Equipped with strong glue, firmly adhere to the wall without drilling. After proper installation, the duration is longer than that of the suction cup or adhesive. Please refer to the correct glue installation instructions attached to the package.

【About Services】：If you have any quality or installation problems, please contact "YDmeet" at the first time, and we will provide you with professional service and warranty.

【BRASS HAND SHOWER MOUNT】：An overhead handheld shower mount hoder for holding handheld shower securely. Made from solid brass material, not breaks easily like plastic, fits perfectly to hold the hand shower well. No worry about handheld shower head sliding down easily, supporting the weight of shower head as much as possible, keeping hand shower standing steadily. Tapered card slot, its top diameter is 0.9”(23mm), its bottom diameter is 0.78”(20mm), the depth diameter is 1.14”(29mm).

【G1/2 UNIVERSAL CONNECTION】：The handheld shower diverter valve is G1/2 (1/2inch) universal standard thread connection with one G1/2 female thread water inlet(connect to shower arm pipe) and two G1/2 male thread water outlets(connect to handheld shower and fixed shower head), fits universal standard straight threads G1/2(1/2-inch) hand shower and fixed shower head.To prevent the hand shower from hitting the fixed shower head, use a fixed shower head that is 8 inches and smaller.

【SIMPLE, TROUBLE-FREE INSTALLATION】：The 3 way shower valve with handshower mount is easy to install. No plumbers required, quick and trouble-free to install. All needed accessories are provided in the package, just follow the installation manual is an easy job to finish in few minutes. A metal slip nut is easy to tighten and adjust the angle or position you want. A small hex screw driver is included for adjusting the handheld shower head bracket in any angle to meet your needs.

【Widely Used】：Fits most handheld shower hose for shower hose bottom diameter between 0.75inch-0.78inch(19mm-22mm). (NOTE: Waterpik Brand Handheld Shower or Hose doesn’t work for this shower head wall holder).

【Very Firm＆No Drilling】：Equipped with strong glue, firmly adhere to the wall without drilling. After proper installation, the duration is longer than that of the suction cup or adhesive. Please refer to the correct glue installation instructions attached to the package.

【About Services】：If you have any quality or installation problems, please contact "YDmeet" at the first time, and we will provide you with professional service and warranty.

【Large Flow Rate】：Designed with a big water flow channel and big hole, flow rate is 7.8 GPM (@ 60PSI) , without any restrictors. High flow rate, No water flow limitations. Just enjoy your great rainfall showering experience with fully flow.

【Standard G1/2 Connection】：This shower head ball joint adapter is standard G1/2 universal connection. One G1/2 female water inlet and one G1/2 male water outlet, fits with standard G1/2 straight threaded shower heads and shower arms.

【Simple Installation】：Tools-free installation, this shower swivel ball adapter is easy to install in few minutes. Just twist on it. No plumbers required, trouble-free. Pacakage includes all needed accessories for installation.

✅【Solid Brass Material】：Shower diverter valve is bulit in one-piece solid brass construction body material, all metal, heavy-duty, no plastic. Sturdy and wear resistant, well resists high water pressure and high temperature, durable to use than plastic. Premium elegant Polished finish resists corrosion and tanish for long-time use. Easy for daily clean and maintain. Designed with a big flow channel, this Polished shower diverter has no water flow limitations.

✅【Easy Installation & Well Operation】：This handheld shower diverter is simple to install with a metal slip nut without plumbers. Just tighten the swivel nut and adjust the position or angle you want. All needed accessories are included in the package for you. A sturdy metal handle lever operates easily and turns smoothly to switch water. No leakage, a free teflon tape is included.

✅【Multi-Scene Use】：The chrome finish is easy to match with various styles of bathroom fixtures. Suitable for 3-way diverter of shower arm/shower set/bath faucet.

3 WAY FUNCTION: The faucet diverter is 3 way that can switch water from hand sprayer and aerator or both. You can turn water with the lever and no need to detach other accessories. The faucet diverter fits M22 male faucets or M24 female faucets with remove aerators. Not fit shower arm and irregular faucets.

5 SETTING SHOWER HEAD: The handheld shower sprayer is 5 settings modes - Power rain, rain massage, economy rain, pulse and rain pulse. 2.5GPM high flow rate, high pressure with strong flow to wash. It is a good handheld sprayer attachment to help you wash in the sink faucet.

RECOIL HOSE & SHOWER HOLDER: The recoil shower hose is made of PP plastic, leak-proof, extendable and durable. It shrinks in 1.4ft length, easy to store and use. The handheld sprayer holder holds the hand sprayer convenient. Use glue to install in minutes.

▶【3 Way Shower Diverter Valve】: This 3 way brushed nickel shower arm diverter connects to shower arm, converts water between handheld and fixed shower. When handle is forward/ backward 180°, water flows from one of water outlets. When handle lever is upward 90°, both two outlets discharge water simultaneously, but water flow is halved of each outlet and it depends on your water pressure.

▶【Easy Installation】: Designed with a Stainless Steel Slip Nut, easy to tighten it down in any position or adjust the angle. A sturdy metal handle lever turns smoothly to convert water between fixed shower head and hand shower.

▶【Brushed Finish】: Elegant and premium brushed finish, resists corrosion and rust-proof, easy for daily clean and maintain, best matches with other fittings in your bathroom.