Musical Instruments From XIYANGJUAN on Amazon

Elektrisola magnet wire: The same wire used by GIB. Single build (thickness of coating on wire) high quality magnet wire manufactured to NEMA (National Electrical Manufacturers Association) standards.

Pole screws and slugs: Manufactured to GIB specifications, using the same metal alloys.

Also: ProBucker pickups feature Sand cast Alnico II magnets, high quality 4 conductor lead wire and are Vacuum Wax potted to eliminate microphonics.

You can control the height of each string with raising the screws of the nut and get the string height that you need.You can lower it with a screwdriver and put the string back, retuning it to the desired note, and strum it hard until it buzzes on the open, then raise it one or two quarter turns from the point where it buzzes.

Measurement: Length: 42mm (1.65”); Thickness: 4.8mm (0.19”); Height: 5.5mm (0.22”); E string to E string: 35.5 mm (1.40”).

Easy adjustment for different strings sizes and step down tune,some even put a little oil so where the strings sit and keep in tune.If you like low action strings, and this nut is one important part to consider.

🎸The saddle and nut are made of high dense real cattle bone which is much harder and will give better tone than the cheaper plastic part,it can give your guitar a better voice.Many luthiers and guitar manufacturers prefer bone guitar nuts for their instruments.

🦴These genuine bone guitar saddle and nut has pre-cut string slots which requires very little experience to install,easy to do!

📏Nut Size:Approx. 43 x 9 x 6 mm / 1.69 x 0.35 x 0.24 inch. Saddle Size: Approx. 72 x 9 x 3 mm / 2.83 x 0.35 x 0.12 inch."

Sets of 6 with mounting screws bushings, washer

Solid tuners and high quality. Die cast not plastic.

Measurement: Length: 43mm (1.69”); Thickness: 5mm (0.20”); Height: 8 (0.31”); E string to E string: 36 mm (1.42”).

High density and minimal porosity that yields good intonation and clarity.

Easy adjustment for different strings sizes and step down tune,some even put a little oil so where the strings sit and keep in tune.If you like low action strings, and this nut is one important part to consider.

Roller nut Length: 43mm(1-11/16"); Width: 12mm(15/32"); Height: 6.7mm(17/64"); String space: 35mm(1-3/8"); 2 mounting holes distance from center to center: 27.5mm(1-3/32").

This roller nut will help keep your guitar in tune better and give your strings longer life by preventing drag and friction at the nut.

High quality metal material, chrome color, easy to installation, 2 mounting screws are included.

These tuners are quality tuners made of all metal construction. Chinese copies have plastic gear, these are the original real deal Jin-Ho manufactured tuning keys, model type 2 with no Jin-Ho written on it, only the 2 indicating the model 2 with no branding (read above literature on Jin-Ho models). You will receive 6 of them.

10mm (13/32")-diameter pegholes required.

Note:Due to manual measurement, there may be an error of 0.5-1mm.These are brand new, still contain the plastic protector on the outside part of the tuner. Jin Ho is known for high-quality machined tuners.

🎸Good Replacement:Good upgrade or replacement for Fender vintage Tele TL tremolo electric guitar;

🎸Better Section:Each saddle is reversible and can be used in any position,and each section is individually cast to be staggered, allowing for better;

🔧Easy to install:Increases and maintains your Telecaster's tuning stablility.The package includes one saddle wrench.

Material: Zinc alloy, the roller bridge is durable and corrosion resistant.

The roller saddle bridges help keep string stable and reduce the string breakage. Also, increase sustain and keep tuning stability.

Roller saddle bridge stud insert diameter Φ6.3. Package Includes: Bridge x 1, Stud x 2. Made in Korea.

🎸Versatile Application:The capo universal for multiple musical instruments, which is suitable for guitars of different widths, such as electric guitar, acoustic guitar, bass, mandolin, ukulele, and banjo to change intervals quickly;

🎸Perfect Sound:Sound harbor guitar capos are subject to stringent inspection and quality and these guitar capos hold the strings down perfectly to make the perfect sound you want and do not create any buzzing noise,allowing you to play with it in any position on the neck you want,which has become one of the most important skills guitarists must master in expressing perfect sound effect.Just start to customize your own music!

🎁 Durable use:The capo is made of good hand feeling aluminum alloy material.Besides,the surface of the alloy capo is processed by electroplating, which is able to withstand the test of time and show its durability. In addition, the silicone pad made of high quality silicone and design of this guitar capo can perfectly fit instruments' neck, ensuring the accuracy of the tone change. Meanwhile, it can protect the guitar and strings from scratches.Package contains: 1capo+1pad+3picks.