Electronics From UCTRONICS on Amazon

【Improvement】 Upgraded from our previous UCTRONICS for Raspberry Pi cluster case U6243（ASIN:B09JNHKL2N）. Now you can power your fans while using PoE HAT. Compatible with Raspberry Pi official PoE+ HAT and UCTRONICS mini PoE HAT(ASIN:B082ZLDMZ6). Also We replaced the thumbscrews with captive loose-off screws on the mounting brackets, which greatly improves the stability of the brackets. The front and back panel openings are expanded to support more models of switches.

【Wide compatibility】 Designed to house 4×Raspberry Pi 4B, 3B+/3B, or other B models, 4×2.5” SSDs and Ethernet switch in a cluster case. You can use it as a complete desktop NAS. It also has holes reserved for the SD card extension adapter (ASIN: B09CKRDFTH) which allows you to access the SD card from the front of the case. Please note that the thickness of a 2.5" SSD cannot exceed 7mm.

What is it - A UCTRONICS PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.

What is PoE – Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source

Improvement - PoE Functionality: The adapter board was turned to reroute all those ports into a full-functioning Power Over Ethernet HAT, and it’s compatible with any PoE switches.

VISIBLE: A 0.91 inch OLED screen, the first line shows the IP address, and he second line loops through three rows: the CPU temp & usage, SD card space usage and memory usage. You can also program it to show something else.

VISIBLE: A 0.91 inch OLED screen, the first line shows the IP address, and he second line loops through three rows: the CPU temp & usage, SD card space usage and memory usage. You can also program it to show something else.

AVAILABLE: A micro-to-normal HDMI adapter that converts the two Micro HDMI ports to full-size ones, SD Card slot is also repositioned to the front.

IMPROVEMENT - Front-Removable, the mounting bracket allows each Raspberry Pi can be individually removed from the front without removing the whole thing.

Wide Compatibility- The rackmount can house up to 4 RPis, and the RPi mounting bracket supports Raspberry Pi 4 B and 3 B/B+ and all other B models.

You Will Be Getting: 4 pieces of 15mm/5.9inch SD card flexible adapters. Specially designed for Raspberry Pi 4B/3B/3B+, and other B/B+ Models to stretch out its Micro SD card sockets.

As optional accessories for the Raspberry Pi 1U and 2U Rackmount. There is 2 holes on the adapter which is totally compatible with the screw hole of the RPi mounting plate.

Video-audio Joy: 1024 x 600 pixels high resolution (support up to 1920 x 1080 input and auto-scaling). 178° wide viewing angle and adjustable backlight make sure high visual quality; 3.5mm audio/headphone jack makes the display no longer silent.

Perfect for Raspberry Pi 4: Micro HDMI adapter included, hassle-free connection to Raspberry Pi 4

You will be getting: 1 pcs 1U rackmount, 6 pcs SD card adapters, 6 pcs rerouting boards with PoE function, 6 pcs heat sinks, 6 pcs power switches, and 1 pack of screws.

Design for Raspberry Pi 4: This 19-inch rackmount is specifically designed to house Pi 4 B, supports up to 1-6 units; it fully compatible with 19” server racks, had no issue plugging into the 1U rack space.

Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A

Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.

A DIN option to provide a wide range of flexibility in mounting for multiple SBC devices, such as Raspberry Pi 4, 3 B/B+ and all other A, B and Zero Models, Raspberry Pi Pico, Arduino Uno/Mega 2560, BeagleBone series.

The mounting bracket is made of 1.2mm carbon steel, attaches to both the SBC and the DIN rail sturdily, multiple optional mounting holes help you mount the different boards and the DIN rail clips in both horizontal and vertical way.