Industrial & Scientific From TizZo on Amazon

💎Product Name: 12 lead tester data recording paper

💎Specification: 210mm * 140mm-20m(140pcs) with grid

💎These connectors contain twenty 2mm sockets molded into a low-profile housing

💎The tight pitch between sockets makes them particularly suitable for use in circuit

💎When filling standard gas or sampling, it is better to replace it with pre installed gas for 3 times. The sampling bag can be reused and cleaned with pure air or high-purity nitrogen

💎The product has stable chemical properties and can store general industrial gases for a long time to ensure the same concentration. It can collect hydrogen (H2), oxygen (O2), nitrogen (N2), methane (CH4), carbon monoxide (CO), carbon dioxide (CO2), industrial gases, petrochemical gases, environmental gases, greenhouse gases

💎This plug can be used in laboratory and industrial production

💎The material of the plug is copper plating, and the back is made of safety material, which can withstand high temperature

💎It is often used in panel installation and in case of fast wire clamping test, 1 pcs/bag

💎Press the top button to extend the stripped wire into the side window. Release the button to quickly clamp the wire. After the test is completed, press the button to quickly move the wire to complete the test

💎When filling standard gas or sampling, it is better to replace it with pre installed gas for 3 times. The sampling bag can be reused and cleaned with pure air or high-purity nitrogen

💎During storage and use, keep away from open fire and high temperature to avoid sharp objects piercing. It is recommended that the inflation pressure of the sampling bag should not exceed 20KPa

💎2 Pcs gold-plated high current DIY Kelvin clips with two electrodes on each side (source & sense are insulated from each other)

💎The maximum opening is 12mm and the length is 57.91mm

💎It is often used in panel installation and in case of fast wire clamping test, 1 pcs/bag

💎Press the top button to extend the stripped wire into the side window. Release the button to quickly clamp the wire. After the test is completed, press the button to quickly move the wire to complete the test

Platinum sheet specification: 10mm × 10mm, 10mm × 15mm, 10mm × 20mm, 15mm × 15mm, 10mm × 30mm

The thickness of platinum sheet is 0.1mm-0.3mm

💎When filling standard gas or sampling, it is better to replace it with pre installed gas for 3 times. The sampling bag can be reused and can be cleaned with pure air or high-purity nitrogen

💎The product has stable chemical properties and can store general industrial gases for a long time to ensure the same concentration. It can collect hydrogen (H2), oxygen (O2), nitrogen (N2), methane (CH4), carbon monoxide (CO), carbon dioxide (CO2), industrial gases, petrochemical gases, environmental gases, greenhouse gases

Total length 48mm

Accurate measurement

✽The 3-layer PE material has good wrapping property and is not easy to leak

✽Corrosion resistant, stable properties, suitable for the preservation of most biochemical samples and extracts

🌟PROTECT YOUR EYES AND SPINE: By taking advantage of optics principles and employing the reflecting prisms; Designed to allow people reading books or watching TV while lying in bed; Reduce the need for head movement; Perfect for those with limited mobility

🌟90° VISION: Turn your view to a downward 90 degree angle; Glasses do not magnify or focus images, but simply tilt images at a 90-degree angle in order to view vertical images while in a horizontal position

1.Glassy carbon, or glassy carbon, is a kind of amorphous carbon, which is made by slowly heating polyacrylonitrile resin or phenolic resin to a high temperature (up to 1800 ℃) in an inert atmosphere. It is suitable to be used as an electronic conductor material for electrodes and is also widely used in table tennis

2.The advantages of glassy carbon electrode are good conductivity, high chemical stability, low coefficient of thermal expansion, hard texture, good air tightness, wide application range of potential (from - 1 to 1V, relative to saturated calomel electrode). It can be made into cylindrical, disc and other electrode shapes. It can also be used as the matrix to make mercury film glassy carbon electrode and chemically modified electrode

💎Smaller size for easier application and minimal irritation

💎Excellent trace quality for more accurate results

💎Metal lead cube, Lead cube, High purity lead 10 mm, pb9999, The average weight is about 11.3g. Due to the soft lead, the surface can only be polished by hand, which is time-consuming and laborious. Metal lead is easy to oxidize and darken in the air, so the color is gray black, which is normal and does not belong to quality problems. And lead is very soft, very easy to wear, the surface is easy to produce scratches, very easy to knock corners, this is due to the nature of lead

💎The cube is engraved with element abbreviations, density, purity and relative atomic mass

✦Total Length: 1.5m. Copper Alloy, Parameters:Tube socket: inner diameter 1.5mm * 15mm long, gold plating welding copper pipe, outer diameter 2.7mm

✦Material: high quality TPU, flexible and durable conductor

💎Our gas sample collection bag is a product independently developed by the supplier and has patent intellectual property rights. We first introduced the design of single and double valves in the industry, which further optimizes the convenience of the gas collection bag in practical use. We use the highest quality raw materials and the most scientific design, and strictly control the production process, Therefore, we have absolute confidence in the quality of our products

💎When filling standard gas or sampling, it is better to replace it with pre installed gas for 3 times. The sampling bag can be reused and can be cleaned with pure air or high-purity nitrogen. During storage and use, keep away from open fire and high temperature to avoid sharp objects piercing. It is recommended that the inflation pressure of the sampling bag should not exceed 10KPa