* Cherrypicksreviews.com is reader-supported, Our editor review, and recommend the best products based on extensive data analysis, if you click on the product links, we may earn a commission through qualifying products purchased.
We last checked the prices on , and The listed prices are a reference for the past month based on our algorithms for our top listed products. Take note: A specific product price and availability may vary from time to time.
Price DisclaimerPrice Disclaimer
Top 11 Tiger Tool Products On Amazon (Verified to buy)
Top 1
Tiger Tool 44mm Wheel Bearing Greaser for use with Polaris RZR 900/1000 / PRO XP, Jansen Motorsports 44 Millimeter Wheel Bearing Grease Packer for ATV, UTV, and SxS, 1.005.003
Bearings can now be greased without removing the axle or suspension components for use with Polaris ATV, UTV, and SxS's. Simply remove the wheel, brake caliper and hub, insert the greaser into the bearing, and then guide the axle through the center bore.
This greaser is for use with Polaris ATV, UTV, and SxS's that have an inside wheel bearing diameter of 44mm. This wheel bearing greaser also works with PRO XP version.
The 44 millimeter wheel bearing greaser has a tapered housing with an O-ring seal that prevents excessive grease from escaping while using the tool. This tool also has a knurled surface which provides a non-slip grip for easy use.
This wheel bearing grease packer is precision machined from high-grade 6061 T6 Aircraft Aluminum, give you the best quality to ensure you have what it takes to get the job done. The internal step bore on this greaser provides clearance for CV shaft reducing back-pressure, making your job more comfortable, quicker, and easier to do.
The Tiger Tool 44mm Wheel Bearing Greaser, part number 1.005.003, is proudly made in North America and is engineered to a standard to make sure that you have what it takes to get the job done right.
Show MoreShow Less
Top 2
Tiger Tool Angled U-Joint Snap Ring Pliers for Automotive and Medium Duty Trucks, Cars, Equipment, and ATV / UTV, 75 Degree Plastic Push Pin Pliers for use with Class 1 - 5 Vehicles, 70301
The 75 degree head on the Tiger Tool 70301 Snap-Ring Pliers are designed to provide a secondary option to the 70300 Snap Ring Pliers to access those hard to reach areas on a wide variety of universal joints.
Application: Commonly found on class 1-5 trucks, cars, atv/utv and equipment. (For use with Ford F-150/550, for use with Chevrolet 1500/5500, for use with Ram 1500/5500, etc.).
The Tiger Tool 70301 snap ring pliers with a 75 degree head can be used to break loose, remove as well as replace even the most highly corroded snap rings on your vehicles and equipment.
The 70301 can also be used to remove plastic (push-pin) retainers on several makes and models of late model cars, ensuring you optimal use for many different applications.
As always, Tiger Tool makes quality and reliable tools, including the 70301 snap ring tool pliers, to ensure you have what it takes to get the job done right.
Show MoreShow Less
Top 3
Tiger Tool Yoke Puller for Automotive Trucks, Cars, and Equipment, Automotive Yoke Puller for use with Class 1-2 Vehicles, Light Duty Yoke Puller, 10850
The Tiger Tool 10850 simplifies and expedites the removal of automotive yokes on drive shafts, transmissions and rear-end differentials without damage to the yokes.
Application: Commonly found on class 1-2 trucks, cars and equipment. (For use with Ford F-150/350, for use with Chevrolet 1500/3500, for use with Ram 1500/3500, etc.)
The 10850 Tiger Tool is manufactured from high grade steel for strength and durability, ensuring you longevity and quality for the lifetime of your tool.
The 10850 also has black oxide finished coating that resists corrosion, giving each mechanic and technician peace of mind that this tool will endure their job.
Tiger Tool's 10850 Automotive Yoke Puller for use with class 1 - 2 vehicles is proudly made in North America to ensure you have what it takes to get the job done right.
Show MoreShow Less
Top 4
Tiger Tool Brake Anchor Pin Press for Commercial Trucks, Brake Anchor Pin Press for Semi Trucks, Works on Class 6-8 Transportation Trucks and Equipment, 16002
With the 16002 you can safely and easily remove brake anchor pins and bushings on virtually all 16-1/2” S-Cam trailer and tractor “Q” brake systems in minutes.
Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.
The 16002 has a rigid C-frame with 10-ton capacity, and as always, this tool is manufactured from high-grade steel for strength and durability. The compact design enables the operator to service brake anchor pins and bushings while the hub and dust shield remain on the vehicle. Don’t waste your time replacing rusted, seized or broken dust shield bolts; with the 16002, you need only focus on the task at hand.
Tiger Tool's Brake Anchor Pin Press utilizes a 7/8” hex drive, meaning you don’t need any specialty tools for operation. With an included bushing removal adapter, the Tiger Tool 16002 removes both the anchor pins and the bushings.
The Tiger Tool Brake Anchor Pin Press, part number 16002, is proudly made in North America to ensure you have what it takes to get the job done right.
Tiger Tool Yoke Puller for Commercial Trucks, Heavy Duty Yoke Removal Tool Kit, Semi Truck Yoke Remover Tool, Works on Class 6-8 Trucks and Equipment, 10803
The Tiger Tool Commercial Yoke Puller simplifies and expedites the removal of commercial heavy duty yokes on driveshafts, transmissions and rear-end differentials without damage to yokes or other components.
Application: Commonly found on class 6-8 transportation trucks and equipment. (for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). Yokes with a bearing diameter between 1 7/8” and 2 3/16”. Spicer and Meritor 1610, 1710, 1760, 1810 Series. Spicer SPL 140, 170, 250 Series. Meritor/Rockwell RPL 20, 25 Series.
The Tiger Tool 10803 is manufactured from high-grade steel for strength and durability. This yoke removal tool is engineered for use with a 1 inch impact tool and is capable of generating over 25,000 pounds of pulling power.
When it comes to quality, no detail is too small. To prolong the life of the forcing screw, the pull bar is precisely milled with a chamfer. The caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks. Tackle more jobs with fewer parts using the 10803.
The Tiger Tool Heavy Duty Commercial Yoke Puller Tool Set is proudly made in North America to ensure you have what it takes to get the job done right.
Show MoreShow Less
Top 6
Tiger Tool 35mm Wheel Bearing Greaser for use with Polaris, Jansen Motorsports 35 Millimeter Wheel Bearing Grease Packer for ATV, UTV, and SxS, 1.003.003
Bearings can now be greased without removing the axle or suspension components for use with Polaris ATV, UTV, and SxS's. Simply remove the wheel, brake caliper and hub, insert the greaser into the bearing, and then guide the axle through the center bore.
This greaser is for use with Polaris ATV, UTV, and SxS's that have an inside wheel bearing diameter of 35 millimeters. Please confirm the bearing size of your model prior to purchase.
The 35 millimeter wheel bearing greaser has a tapered housing with an O-ring seal that prevents excessive grease from escaping while using the tool. This tool also has a knurled surface which provides a non-slip grip for easy use.
This wheel bearing grease packer is precision machined from high-grade 6061 T6 Aircraft Aluminum, give you the best quality to ensure you have what it takes to get the job done. The internal step bore on this greaser provides clearance for CV shaft reducing back-pressure, making your job more comfortable, quicker, and easier to do.
The Tiger Tool 35mm Wheel Bearing Greaser, part number 1.003.003, is proudly made in North America and is engineered to a standard to make sure that you have what it takes to get the job done right.
Show MoreShow Less
Top 7
Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment, Sheppard M100 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10385
Tiger Tool's 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes.
Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.)
This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool.
Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor.
The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right.
Show MoreShow Less
Top 8
Tiger Tool Slack Adjuster Rod Pin Press for Commercial Heavy Duty Transportation Trucks and Equipment, Slack Adjuster Tool for use with Class 6-8 Trucks, 10502
Tiger Tool's 10502 Slack Adjuster Rod Pin Press instantly shears off the cotter pin allowing the 3/16" clevis pin to be easily removed from class 6-8 transportation trucks and equipment
Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.)
The spring-loaded plunger positions itself automatically over the slack adjuster rod clevis pin, making each mechanic and technicians job quicker and easier than previous methods
The 10502 Slack Adjuster Rod Pin Press fits virtually all makes and models of truck and trailer slack adjuster brake clevises, allowing for ease of purchasing knowing you have the correct tool for your application
The Tiger Tool Slack Adjuster Rod Pin Press for Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right.
Show MoreShow Less
Top 9
Tiger Tool Tie Rod End Remover 7/8 Inch – 14, for use with Commercial Trucks, Heavy Duty Tierod Removal Tool for use with all Class 7-8 Trucks, 10301
Tiger Tool's Tie Rod End Remover provides a safe way to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals and grease nipples.
Application: Commonly found on class 6-8 transportation trucks and equipment. ( For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.)
As always, the Tiger Tool Tie Rod End Remover is manufactured from high-grade steel for strength and durability, ensuring you longevity and quality for the lifetime of your tool.
The 7/8 Inch – 14 Tie Rod End Remover also has black oxide finished coating that resists corrosion, giving each mechanic and technician peace of mind that this tool will endure their job.
The Tiger Tool 7/8 Inch – 14 Tie Rod End Remover for Heavy Duty Semi Trucks is proudly made in North America to ensure you have what it takes to get the job done right.
Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment, Sheppard M110 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10389
Tiger Tool's 10389 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M110 gearboxes.
Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.)
This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool.
Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor.
The Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right.
Tiger Tool Rockwell Automatic Slack Adjuster Puller for Commercial Heavy Duty Transportation Trucks and Equipment, Rockwell Automatic Slack Adjuster Tool for Class 6-8 Trucks, 10407
Tiger Tool's 10407 Rockwell Slack Adjuster Puller tool will both safely as well as efficiently remove virtually all Rockwell self-adjusting slack adjusters.
Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.) Please note that Tiger Tool offers a Low Profile Forcing Screw, part number 10401, that is sold separately to use where space in extremely limited.
This Heavy Duty Rockwell Automatic Slack Adjuster tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability.
Tiger Tool has made the Slack Adjuster Puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor.
The Tiger Tool Rockwell Automatic Slack Adjuster Puller for Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right.
Show MoreShow Less
Our Tiger Tool Review
Tiger Tool products on Amazon (March 2023)
Tiger Tool sell products mainly in the Automotive category.
The brand has over 67 products listed on Amazon with a price range of $24.99 to $499.99 form our picks.
Currently, the average price of their product is $206.02 which is considered affordable. You can make your choice from the list of products offered by the Tiger Tool.
Is Tiger Tool a good brand?
A brand is an essential factor when making a purchase. What do we think about the Tiger Tool? Well, according to the information available on Amazon, Tiger Tool products are sold by JBTools.
The seller has received about 7,831 feedbacks from buyers with an average start rating of 4.8. With a rating as this from the number of feedbacks, we can conclude that Tiger Tool is the brand can be categorized as average as its products receive an average rating which is still good and quite acceptable.
CPR sellers rank is based on CherryPicks-AI bestselling ranking system that helps us analyze each seller's sales trends. The List of top seller ranks is our in-house data, essential for our product ranking to help you make the right shopping choice.