Industrial & Scientific From Taytools on Amazon

Taytools 465685 Machinist Parallel Blocks Bars 20-Piece Set 1/8 inch Wide x 3 inch Long Straightedge Bar Blocks – 1/2 inch to 1-5/8 inch Matched Pairs

Ratings for Taytools (CPR Score)

Features

USES: Use these Taytools Machinist Parallel Bars for numerous machine shop drilling or machining tasks.

SIZES: This package includes 10 pairs of 1/8 inch thick x 3 inch long parallel bars in the following heights: 1/2- inch, 5/8-inch, 3/4-inch, 7/8-inch, 1-inch, 1-1/8 inch, 1-1/4-inch, 1-3/8-inch, 1-1/2-inch and 1-5/8-inch. Each bar has the sized laser-etched on one face. Each bar contains 2 holes 1-1/2 inches apart with the diameters ranging from 3/16 inch to ½ inch.

Show More

Taytools Square End Hand Brace Adapters for Auger Boring Bits with Hex Shafts (1/4 inch)

Ratings for Taytools (CPR Score)

Features

Hex shaft accepted: 1/4 inch (6.35mm)

Depth of hole: .820 inch

Show More

Taytools 506005 5 Piece Set Solid Brass Set Up Bar Gauge Blocks 1/8, 3/16, 1/4, 3/8 and 1/2 Inches, All 2-1/2 Inches Long

Ratings for Taytools (CPR Score)

Features

Set up gauge bars are the simplest way to set fence and cutter height

The risk of damage to a carbide cutting edge is greatly reduced because brass is much softer than the tool

Show More

Taytools TTW05928 1/4-20 Centered Hole Sliding T-Nuts for T Track Extrusions 25 Pack

Ratings for Taytools (CPR Score)

Features

25 pack

These slide-in T-nuts with a centered thread hole are a cost-effective fastening option for T-Track and other aluminum extrusions.

Show More

Taytools Digital Level Inclinometer Digital Bevel Box with Back Lit Display and Rare Earth Magnets on Bottom 113900

Ratings for Taytools (CPR Score)

Taytools 388039 12 Inch Wooden Hand Screw Clamp for Woodworking (1, 12 inch)

Ratings for Taytools (CPR Score)

Features

Includes one 12 inch clamp

Size: 12 inch; Jaw Length: 12 inch; Max Jaw Opening: 8-1/4 inch; Jaw Throat Depth: 6-1/4 inch; Jaw Thickness: 1-7/8 inch; Jaw Depth: 2-1/8 inch: Thread size: 7/16 inch

Show More

Moxon Vise Hardware Kit with 2 each 8 Inch x 3/4-10 Threaded Rods, 2 each 4-1/2 Inch Cast Knobs and 4 each 3/4 inch Nuts and Washers

Ratings for Taytools (CPR Score)

Features

Moxon Vises are double-screw work-holding fixtures that have been in use in furniture shops for some 400 years. A dual-screw Moxon Vise is an incredibly versatile workbench accessory that is simple to build with the right hardware.

A Moxon vise can stabilize wide and narrow boards with incredible force while various joinery, shaping or carving operations are performed. It raises the workpiece to a more comfortable and ergonomic height. It is highly portable and can be quickly mounted anywhere on a bench or table, and when not in use, easily stowed away on a shelf or hung on a wall.

Show More

Magnetic Base without Adjustment Arm, Metric M8 x 1.25 Tapped Hole, 132 Pounds Force, 2.125 Inches high x 2 Inches wide x 3 Inches deep MB

Ratings for Taytools (CPR Score)

Features

Mag base with super strong magnet with 132 pounds (60 Kg) of holding power

Base does NOT come with adjustment arm

Show More

Taytools 1-2-3 Blocks Matched Pair (2 Each) 23 Hole Hardened Steel

Ratings for Taytools (CPR Score)

Features

Contains 23 3/8" through holes (5 holes tapped with 3/8" x 16 TPI threads and 18 untapped)

Made of hardened tool steel (RC 56-60) and precision ground on all six sides

Show More

Taytools Cork Rubber Vise Jaw Lining 5-7/8 inch wide x 36 inch long x 1/8 inch thick (Without Pressure Sensitive Adhesive)

Ratings for Taytools (CPR Score)

Features

This cork rubber sheeting is a composite material made from natural cork and neoprene rubber. Due to the high neoprene content, this sheeting is incredible grippy, especially under pressure.

When installed on the jaws of a woodworking vise, it will help the jaws firmly hold work pieces and keep them securely in place.

Show More