* CherryPicks.Reviews is reader-supported, Our editor review, and recommend the best products based on extensive data analysis, if you click on the product links, we may earn a commission through qualifying products purchased.
We last checked the prices on , and The listed prices are a reference for the past month based on our algorithms for our top listed products. Take note: A specific product price and availability may vary from time to time.
Price DisclaimerPrice Disclaimer
Top 15 seeed studio Products On Amazon (Verified to buy)
Top 1
Seeed Studio Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor for Gamecube, 1pc.
Notice: We only provide after-sales service purchased from Seeed Studio
🌱【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory.
🌱【Multiple Software Support】Pico has rich and complete software support, it comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.
🌱【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.
Show MoreShow Less
Top 2
Seeed Studio XIAO SAMD21 The Smallest Arduino Microcontroller Based on SAMD21nwith Rich Interfaces for Wearable Devices, 100% Arduino IDE Compatible, Desiged for Projects Need Arduino Micro, 3pcs.
🌱【Powerful CPU】 The Seeeduino XIAO is equipped with an ARM Cortex-M0+ 32bit 48MHz microcontroller, which is three times faster than Arduino Uno and Arduino Nano. Furthermore, this Arduino IDE compatible board XIAO has 256KB flash memory and 32KB SRAM.
🌱【Rich Interfaces in a Tiny Size】 The device has 14 GPIO pins, each of which has 11 analog channels, 11 digital channels, I2C*1, UART*1, and SPI*1, USB Type-C interface*1 in a tiny space, just 20mm*17.5mm (about the size of your thumb). Seeeduino XIAO is the smallest Arduino compatible board in the Seeeduino series.
🌱【Fully compatible with Arduino IDE】 Seeeduino XIAO development board is perfectly compatible with Arduino IDE and you can easily create small projects using the extensive and comprehensive Arduino library. It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.
🌱【Applications】 Seeeduino XIAO is suitable for Wearable devices, Rapid prototyping, DIY keyboard, USB to multi-channel TTL/USB host mode, etc.
🌱【Perfect for Wearable and Tiny Arduino Projects】 This microcontroller has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects.
Seeed Studio XIAO ESP32C3 - Tiny MCU Board with Wi-Fi and BLE for IoT Controlling Scenarios. Microcontroller with Battery Charge, Power Efficient, and Rich Interface for Tiny Machine Learning. …
【ESP32-C3 RISC-V Development Board】 Built with the ESP32-C3 32-bit RISC-V chip (160MHz), featuring Arduino/CircuitPython support and multiple development ports. Ideal for IoT and edge AI projects.
【Outstanding RF & Long-Range Connectivity】 Equipped with U.FL antenna for stable Wi-Fi/BLE5.0 communication over 100m. Complete RF performance ensures reliable IoT connectivity.
【Ultra-Low Power & Battery-Friendly】 4 working modes, including deep sleep at 44μA. Onboard battery charge IC supports Li-ion/LiPo, perfect for wearables and wireless IoT.
【Thumb-Sized & Production-Ready】 Compact 21x17.5mm design with SMD/Breadboard-friendly layout. Single-sided component mounting ensures sleek integration into wearables.
【Rich I/O & Edge Computing】 11 digital I/O (PWM) + 4 analog I/O (ADC), plus UART/IIC/SPI/IIS ports. Optimized for TinyML and edge AI applications.
Show MoreShow Less
Top 4
Seeed Studio XIAO ESP32 S3 Sense - 2.4GHz Wi-Fi, BLE 5.0, OV2640 Camera Sensor, Digital Microphone, 8MB PSRAM, 8MB Flash, Battery Charge Supported, Rich Interface, IoT, Embedded ML …
Powerful MCU Board: Incorporate the ESP32 S3 32-bit, dual-core, Xtensa processor chip operating up to 240 MHz, mounted multiple development ports, Arduino / MicroPython supported
Advanced Functionality: Detachable OV2640 camera sensor for 1600*1200 resolution, compatible with OV5640 camera sensor, integrating additional digital microphone
Great Memory for more Possibilities: Offer 8MB PSRAM and 8MB FLASH, supporting SD card slot for external 32GB FAT memory
Outstanding RF performance: Support 2.4GHz Wi-Fi and BLE dual wireless communication, support 100m+ remote communication when connected with U.FL antenna
Thumb-sized Compact Design: 21 x 17.5mm, adopting the classic form factor of XIAO, suitable for space-limited projects like wearable devices
Seeed Studio XIAO SAMD21The Smallest Arduino Microcontroller Based on SAMD21,with Rich Interfaces, 100% Arduino IDE Compatible, desiged for Projects Need Arduino Micro, 1pc
🌱【Powerful CPU】 The Seeeduino XIAO is equipped with an ARM Cortex-M0+ 32bit 48MHz microcontroller, which is three times faster than Arduino Uno and Arduino Nano. Furthermore, this Arduino IDE compatible board Xiao has 256KB flash memory and 32KB SRAM.
🌱【Rich Interfaces in a Tiny Size】 The device has 14 GPIO pins, each of which has 11 analog channels, 11 digital channels, I2C*1, UART*1, and SPI*1, USB Type-C interface*1 in a tiny space, just 20mm*17.5mm (about the size of your thumb). Seeeduino XIAO is the smallest Arduino compatible board in the Seeeduino series.
🌱【Fully compatible with Arduino IDE】 Seeeduino XIAO development board is perfectly compatible with Arduino IDE and you can easily create small projects using the extensive and comprehensive Arduino library. It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.It has a 2.54mm pin pitch and can be used even when inserted into a breadboard because it is an Arduino microcontroller.
🌱【Applications】 Seeeduino XIAO is suitable for Wearable devices, Rapid prototyping, DIY keyboard, USB to multi-channel TTL/USB host mode, etc.
🌱【Perfect for Wearable and Tiny Arduino Projects】 This microcontroller has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects.
Seeed Studio XIAO RP2040 Microcontroller, with Dual-Core ARM Cortex M0+ Processor, Supports Arduino, MicroPython and CircuitPython with Rich Interfaces.
📌【Powerful MCU】 XIAO RP2040 is a microcontroller using the Raspberry RP2040 chip with 264KB of SRAM, and 2MB of onboard Flash memory. This microcontroller has dual-core ARM Cortex M0+ processor, and it can runs at up to 133MHz.
📌【Multiple Interfaces】 This version of XIAO have 11 digital pins, 4 analog pins, 11 PWM Pins,1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD Bonding pad interface.
📌【Flexible Compatibility】Support Micropython/Arduino/CircuitPython. Easy project operation: Breadboard-friendly & SMD design, no components on the back.
📌【Small Size】 As small as a thumb(20x17.5mm) for wearable devices and small projects.
📌【Broad Compatibility】 Pins compatible with Seeeduino XIAO and supports Seeeduino XIAO's Expansion board.
Notice: We only provide after-sales service purchased from Seeed Studio
【Computer in Keyboard Form】Raspberry Pi 400 is a complete personal computer, built into a compact keyboard. Portable design, easy to carry. Just simply connect to a mouse, and a monitor with the Pi 400, you will get a powerful desktop PC.Note: There is only a keyboard in the package. If you want other accessories, welcome to visit our store.
【1.8GHz Quad-Core 64-bit Arm Cortex A72 CPU】Compared with the 1.5 GHz frequency of Raspberry Pi 4, Pi 400 has a frequency of 1.8 GHz. So Pi 400 runs more stable and smoothly, also can help increase the read and write speed of large files.
【Dual 4K HD Video Output】 The 2 HDMI ports on the back of the Raspberry Pi 400 can support up to 4K high-definition dual-band display, very convenient for your work and home entertainment. Built-in 2.4GHz/5GHz Wi-Fi & Bluetooth 5.0, you can enjoy smooth network anywhere.
【Multiple Functional Interfaces】Raspberry Pi 400’s back is designed with multiple functional interfaces. Rich I/O peripherals to further expand your projects.
Show MoreShow Less
Top 8
Raspberry Pi Zero 2 W Basic Kit, Header, Heatsink, USB Cable, HDMI Adapter (with Quad-core CPU,Bluetooth 4.2,BLE,onboard Antenna,etc.)
Powerful Performance: Equipped with a quad-core 64-bit ARM Cortex-A53 processor, the Raspberry Pi Zero 2 W delivers a significant performance boost compared to its predecessor.
Wireless Connectivity: Built-in Wi-Fi and Bluetooth support enable easy wireless communication and Internet access for your projects.
Compact Form Factor: The tiny size of the Raspberry Pi Zero 2 W makes it perfect for space-constrained projects and embedded applications.
Versatile Connectivity: The included HDMI adapter and USB OTG cable provide essential interfaces to connect a display, keyboard, mouse and other peripherals.
Efficient Cooling: The aluminum heatsink helps dissipate heat, ensuring stable performance even under heavy workloads.
Beginner-Friendly: The Raspberry Pi Zero 2 W Basic Kit is an ideal starting point for beginners to learn programming, electronics, and DIY projects
Show MoreShow Less
Top 9
Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor, 3pcs
Notice: We only provide after-sales service purchased from Seeed Studio
🌱【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory.
🌱【Custom Peripheral Support】8 × Programmable I/O (PIO) state machines for custom peripheral support.
🌱【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.
🌱【Multiple Software Support】Pico comes with corresponding C/C++ SDK, Micropython SDK resources.
💎Notice: When we produced the new batch of CAN-BUS Shield V2, the wire of the back pads was embedded inside the PCB, although the wire between the pads is now not visible on the outside, the inside is still connected, if you want to change the wiring of the pads, you still need to cut the wiring in the PCB first.
💎CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks for CAN-BUS, makers are able to hack their cars more conveniently.
💎The CAN-BUS Shield V2 still uses MCP2515 as CAN-BUS controller and MCP2551 as CAN transceiver. OBD-II or CAN standard pinout can be selected by switching jumpers on DB9 interface, the default pinout is OBD-II.
💎We add a TF card slot for data storage and the CS pin can be either set to D4 or D5. The INT pin can also be set to D2 or D3 by switching jumpers on the back of the shield.
💎CAN BUS Shield Work well with Arduino UNO (ATmega328), Arduino Mega (ATmega1280/2560) as well as Arduino Leonardo (ATmega32U4) and LinkIt One.
Show MoreShow Less
Top 11
seeed studio Arduino Sensor Kit All-in-one Starter Kit Come with 10 Sensors 10 Lessons, Tutorial for STEAM Education Compatible with Arduino IDE, Arduino UNO Compatible Board with Pre-Wired Module.
💙【Arduino All in One Kit】 Arduino UNO compatible board(ATmega328p based Seeeduino Lotus) + 10 most commonly used Arduino modules on one PCB.
💙【All Modules are Pre-Wired】All modules are pre-wired to the Seeeduino (Microcontroller) through the PCB stamp holes, no breadboard and jumper cables required. This is perfect for educational fields where frustrating wiring and soldering is no longer needed.
💙【Comes with 10 High-quality online Lessons】This Arduino UNO Compatible Board comes with 10 lessons that will teach you how to connect the different modules, how they work and how they can be programmed. The Kit also compatible with Arduino IDE, friendly for beginner and STEAM education.
💙【Compatible with 300+ Grove Modules】The Arduino Sensor Kit for Arduino also compatible with over 300 grove sensors and modules. Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. We have developed more than 300 Grove modules, covering a wide range of applications that can fulfill a variety of needs.
Show MoreShow Less
Top 12
Seeed Studio XIAO ESP32C6-2.4 GHz WiFi 6, Bluetooth 5.3, Zigbee, Thread (802.15.4), ESP Rain Maker, AWS IoT, Support Microsoft Azure, Smart Home
Enhanced Connectivity: Combines 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5(LE), and IEEE 802.15.4 radio connectivity, allowing you to apply the Thread and Zigbee protocols.
Matter Native: Supports building Matter-compliant smart home projects thanks to its enhanced connectivity, achieving interoperability
Security Encrypted on Chip: Powered by ESP32-C6, it brings enhanced encrypted-on-chip security to your smart home projects via secure boot, encryption, and Trusted Execution Environment (TEE)
Outstanding RF performance: Has an on-board antenna with up to 80m BLE/Wi-Fi range, while reserving an interface for external UFL antenna
Leveraging Power Consumption: Comes with 4 working modes, with the lowest being 15 μA in deep sleep mode, while also supporting lithium battery charge management.
Dual RISC-V Processors: Incorporates two 32-bit RISC-V processors, with the high-performance processor running up to 160 MHz, and the low-power processor clocking up to 20
Classic XIAO Designs: Remains the classic XIAO designs of the thumb-size form factor of 21 x 17.5mm, and single-sided mount, making it perfect for space-limited projects such as wearables
Show MoreShow Less
Top 13
Seeed Studio Wio Terminal ATSAMD51 Core with Realtek RTL8720DN BLE5.0 Dev Board, Wireless Microcontroller Python Terminal Device Compatible with Raspberry Pi for Arduino, Micropython, and TinyML.
💙【Highly Integrated Design】 The Wio Terminal is equipped with a 2.4'' LCD Screen, onboard IMU(LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, and infrared emitter(IR 940nm), packed multiple functions in a 72 x 57 x 12mm tiny but stylish enclosure.
💙【Powerful Processor and Reliable Wireless Connectivity】 Wio Terminal is an ATSAMD51-based microcontroller with wireless connectivity supported by Realtek RTL8720DN. It runs at 120MHz (Boost up to 200MHz) and supports both Bluetooth (BLE4/5.0) and Wi-Fi (2.4G/5G), providing a more powerful IOT capability than ESP32.
💙【Compatible with Raspberry Pi and 300+ Grove Modules】 Wio Terminal is equipped with various peripherals, including two multifunctional Grove ports for Grove Ecosystem and 40 Raspberry Pi compatible GPIO pins for more add-ons. By connecting Wio Terminal to Raspberry Pi, you can start programming and collect environmental data directly, with no need for soldering or breadboards. Over 300 Grove modules are available on Seeed and waiting for you to explore!
💙【Various Application】 Wio Terminal have various application like: You can easily build your TinyML applications with Edge Impulse; Sense and tag the Real-World data with over 300 Groves created by Seeed; Use 100% open-source Hardware in a pythonic way; Build your program interpreter starting from 90% with an LCD screen and compact enclosure.
💙【Rich Software Support】 Lots of software supported by Wio Terminal, such as Arduino, MicroPython, ArduPy, AT Firmware, Visual Studio Code, CircuitPython (coming soon).
Show MoreShow Less
Top 14
Seeed Studio reTerminal - Embedded Linux with Raspberry Pi CM4 and 5-Inch Multi-Touch Screen, Wireless Connectivity Linux Terminal Device for Home Assistant, Machine Learning and Edge AI.
💚【High Stability and Expandability】 reTerminal is powered by a Raspberry Pi Compute Module 4 (CM4) which is a Quad-Core Cortex-A72 CPU running at 1.5GHz and a 5-inch IPS capacitive multi-touch screen with a resolution of 720 x 1280. It has sufficient amount of RAM (4GB) to perform multitasking and also has sufficient amount of eMMC storage (32GB) to install an operating system, enabling fast boot-up times and a smooth overall experience.
💚【Wireless Connectivity】 There are limitless possibilities with the reTerminal. It can be placed at the heart of an IoT/Edge system where you could connect a number of sensors to the reTerminal via different wireless protocols such as LoRa, Zigbee, Wi-Fi, Bluetooth, Sub-1G, and the reTerminal connected to the cloud via Ethernet, Wi-Fi, 5G/ 4G or connected to an edge server to store and process the data.
💚【Secure Hardware-based Key Storage】 reTerminal consists of a high-speed expansion interface and rich I/O for more expandability. This device has security features such as a cryptographic co-processor with secure hardware-based key storage.
💚【40-Pin Raspberry Pi compatible header for IoT applications】 It also has built-in modules such as an accelerometer, light sensor, and an RTC (Real-Time Clock). reTerminal has a Gigabit Ethernet Port for faster network connections and also has dual USB 2.0 Type-A ports. The 40-pin Raspberry Pi compatible header on the reTerminal opens it for a wide range of IoT applications.
💚【Gigabit Ethernet Port and Dual USB 2.0 Type-A ports】Benefit from stable Raspberry Pi-based operating system, multiple expanded industrial-level connectors, cryptographic co-processor, and official Seeed expansion board reTerminal E10-1
Seeed Studio XIAO nRF52840 Sense - Supports Arduino/CircuitPython - Bluetooth5.0 NFC with Onboard Antenna, Microcontroller with 6-axis IMU and PDM Microphone for Tiny Machine Learning.
📌【Powerful CPU】As the advanced version of the board XIAO BLE, Seeed XIAO BLE Sense has equipped a powerful Nordic nRF52840 MCU which is designed in a Bluetooth 5.0 module, built around 32-bit ARM Cortex-M4 CPU with Floating-Point Unit(FPU) operating at 64Mhz.
📌【Wireless Capabilities】XIAO BLE Sense has Bluetooth 5.0 NFC module with onboard antenna. With the capabilities of wireless connection, it still remains the Seeed XIAO series classic form-factor of small and exquisite which can be used for wearable devices and Internet of Things projects.
📌【Rich interface】Firstly, the Near Field Communication(NFC) is functional on the board. Secondly, there is a tiny and elegant reset button on one side of the Type-C interface. It is designed in a three-in-one LED along with power LED. It supports UART, IIC, and SPI all three common serial ports. Same as Seeed XIAO RP2040, it has an onboard 2 MB flash which means it can also be programmed by Arduino, MicroPython, CircuitPython, or other program languages.
📌【Extra Onboard Sensors】One of them is a digital microphone created through Pulse Density Modulation(PDM) module on the nRF52840 chip. It can receive audio data in real-time which allows it can be used for audio recognition. The board not only receives audio data but also can speak through the MSM261D3526H1CPM microphone. The other one is 6-axis Inertial Measurement Unit(IMU) which can be applied in TinyML projects like gesture recognition.
📌【Ultra-small Size】21 x 17.5mm, Seeed Xiao series classic form-factor for wearable devices. Part List: Seeed XIAO BLE Sense - nRF52840*1/7 Pins Header*2.
Show MoreShow Less
Our seeed studio Review
seeed studio products on Amazon (Sep. 2026)
What to buy from seeed studio?
seeed studio sell products mainly in the category.
The brand has over 0 products listed on Amazon with a price range of $5.90 to $4,999.00 form our picks.
Currently, the average price of their product is $178.78 which is considered affordable. You can make your choice from the list of products offered by the seeed studio.
Is seeed studio a good brand?
A brand is an essential factor when making a purchase. What do we think about the seeed studio? Well, according to the information available on Amazon, seeed studio products are sold by Amazon Resale.
The seller has received about 0 feedbacks from buyers with an average start rating of . With a rating as this from the number of feedbacks, we can conclude that seeed studio is
From there, you can tell whether Amazon owns the brand or not. If you want to buy Amazon branded products, you can go here, and list some of their top brands. Amazon owns 100 private-label brands that operate in different markets.
We are crawling & scraping a large amount of data from seeed studio products and a countless number of reviews, you can gain valuable insights to enhance your understanding of various aspects related to seeed studio, and you can use those data to help you make informed buying Electronic Music Equipment,Single Board Computer for Gaming And Tabletop Synthesizers decisions. Those recommend the 15 best products from seeed studio based on thorough analysis and research by our CherryPicks-AI ranking system.
Why create this buying guide?
Our brand guide is designed to provide up-to-date & unbiased information about seeed studio products. Our goal is to empower you with data-driven insights, enabling you to make better shopping decisions efficiently to save time. We prioritize earning your trust by providing reliable information and guidance.
Top 10 seeed studio Sellers: CPR Seller Rank List
CPR sellers rank is based on CherryPicks-AI bestselling ranking system that helps us analyze each seller's sales trends. The List of top seller ranks is our in-house data, essential for our product ranking to help you make the right shopping choice.