Automotive From QPKING on Amazon

Install the wind gun sleeve into the square end of the shank and the other end of the rocker.

The wind gun sleeve is placed on the nut to be disassembled (fastened), pay attention to the elastic direction, and shake the rocker to make the handle against the side of the other bolt.

【 Special machine for removing carbon deposits】HTS558 fuel system cleaning tool is a special machine for cleaning the carbon deposits on the intake pipe and the back of the intake valve of the automobile engine, which can deeply remove the high-viscosity carbon deposits on the intake manifold and intake and exhaust valves. After cleaning, the engine can be kept in a healthy state and ensure the efficient operation of the engine.

【Safe & Efficient】The Intake Pipe Valve Cleaner Machine uses walnut sand as cleaning agent. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion.

【SMALL WELDING SPOT】- Our machine makes small welding spot that means it won't damage the anti-corrosive paint on the another side of panel.

【MULTIFUNCTION】- With 2 welding guns, one machine can be capable of two different functions, which means the time and energy spent on switching guns could be reduced and working efficiency will rise.

[ Dual Hole Testing& Time Saving]: The AUTOOL SPT101 Car Spark Plug Tester is able to dual-hole simultaneous testing as well as analog engine working, which is much more efficient and time-saving.

[0 to 6000rpm Operating Frequency]: The AUTOOL SPT101 Car Spark Plug Tester is designed with adjustable working frequency, the range can reach 0 to 6000rpm. Can be adjusted as you required.

V-Belt Alternator Clutch Pulley Socket 33 Spline Removal Tool Free Wheel Pulley Removal Tool .Special design to stop the pulley and remove.

Alternator Clutch Pulley remover is made by metal, High strength and hardness. sturdy and durable.

[Powerful Functions]: The system is not only characteristic of high and low pressure cleaning function. The non-dismantle fuel injector cleaner kit is used to clean the injectors, intake system and three-way catalytic converter and be cleaned without disassembling the car. But please note that it is only for gasoline injector, not for diesel injector.

[Wondeful Design]: The non-dismantle cleaner C80 has a special handling one-way valves to seal up gas and durable pressure regulating valves. In addition, it also has anti-corrosion, anti-friction connectors for fast- connection and anti-friction oil tubes for all cleaning fluid. Does not include cleaning fluid, only suitable for gasoline injectors, not for diesel injectors.

🌹Made of Aluminum foil Environmental protection cotton.Waterproof and dust-proof.

🌹Superior Sound and Noise Deflector, Excellent Heat Barrier, Minimizes Automobile Vibration

SPARK PLUG TESTER: This is a digital high frequency tester for testing the performance and strength of spark plugs. If you suspect any spark plug works improperly you could compare and test to make accurate judgment.

FIVE TESTING HOLES: Our car spark plug detector has 5 testing holes, allowing you to test 5 spark plugs simultaneously, improving your test efficiency, saving time and money. It is compatible with most crankshaft engine and motorcycle 11mm spark plug.

【ANTI-CORROSION】- C100 fuel injector tester includes anti-corrosion, anti-friction connectors for fast-connection. Anti-friction oil tubes are suitable for all cleaning fluid.

【PROFESSIONAL VALVES】- Multifunctional valves in this fuel injector tester are for fluid adding and gas releasing. Rotate to add fluid, gas releasing speed could be controlled with different force levels.

【Solve common failures of fuel injector】：Easily solve common faults such as stuck, blocked, leaked, or insufficient combustion of the fuel injector.

【Type of standard fuel injection nozzle & high-pressure fuel injector】: That is, the automobile naturally aspirated fuel injection nozzle, the DC voltage 12V can drive the solenoid valve in the fuel injection nozzle. Next, the turbocharged fuel injectors for automobiles, the instantaneous voltage of 75V can drive the solenoid valve in the fuel injector.