Automotive From Mission Automotive on Amazon

Bends Hose To A Perfect Angle: Gives you that “extra hand” in refilling tanks by bending the hose to the perfect angle, leaving you to easily lift the utility container, gas can or jug.

Easy & Precise Refilling Of Tanks: Fill in a fraction of the time. Our hose bender makes refilling tanks and jugs a breeze and make awkward, back-breaking and messy tank filling a thing of the past.

Great Value: Our package comes with four durable hose benders that can be used one at a time or both at the same time depending on the angle needed to refill tanks. Plus, it comes with the added benefit of saving on costly fuel spillage.

Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. For leverage, grab a 1/2” breaker bar or 3/4” drive tool

Tighten Up -- Use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. Or for setting the bearing pre-load. It can also handle other high torque tasks, like crush sleeves

Additional 1/2" Square Socket -- Other yoke flange wrenches only have one and round out over time. The problem is, for tight spaces, you might need multiple. To address this, we added an extra 1/2" square socket. Plus, our stainless steel will prevent any rounding. You'll be able to utilize your pinion depth setting tool for years

Easy Installation -- The Mission Automotive bushing compatible with the Jeep Wrangler transfer case bushing goes on without much effort. First, remove your console with some tools. Next, locate the transfer case linkage and snap the bushing in. Finally, reconnect the linkage to its pin (Always follow manufacturer instructions). That's it!

Don't Break The Bank -- Buying automotive parts can add up quickly. Get the best value by ordering the Mission Automotive part compatible with select Jeep bushings. It will save you both time and money

2 Pack -- Driving your vehicle causes wear and tear on the transfer case cable bushing. They easily shatter over time. With this pack of 2 Mission Automotive bushings as replacement jk bushings, always have one on hand. You never know when you'll need an extra

Perfect For Brake Work: These screws hold the brake rotor in place while the tire is being put back on. Once the calipers / tires are back on, they may be left in place or removed. For best results, apply anti-sieze lubricant for ease of future removal. Work with front / rear and left / right brake disc rotors

Mechanic Grade Quality: When you're doing brake work, you need something that can hold up to the demands of the job. Our screws are made with tight tolerance and are designed to hold up to the needs of mechanics, making them perfect for professionals and DIYers, alike

Please note: This is an aftermarket replacement product (produced by Mission Automotive / Impresa Products) meeting or exceeding the quality of OEM screws (based on in-house testing) - compare to 93600-06014-0H. We have no affiliation with or endorsement from any of the manufacturers mentioned

Universal Carrier Compatibility: The silencer pad is compatible with most trailer tow hitch or hitch ball carrier such as : Reese, CURT, Anderson Hitches, Rugged Ridge, B&W, Draw-Tite, MaxxHaul, Connor, Weigh Safe, and Ram Mount.

Extend The Life Of Your Tow Equipment: The Silencer Pad is made from durable and rugged materials to ensure metal to metal grinding between tow ball and receiver is kept at a minimum - extending the life of your hitch ball and receiver.

Satisfaction Guaranteed: Designed with attention to detail, this product is made from rigid materials providing unbeatable quality.

Fits An Array Of Jacks, Stands And Vehicles -- Our pucks are made to fit a wide array of jacks / jack stands and vehicles. Their universal size allows them to meet a wide-array of needs, though exact fit will vary

Value Pack -- Our set includes two jack pads, providing the value you need to get the job done right - without sacrificing quality.

Dimensions -- Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall. 2 per pack

Wide Compatibility: These washers are compatible with most Honda models, including Accord, Accord Crosstour, Accord Hybrid, Civic, Civic GX, Civic Hybrid, Civic Si, Crosstour, CR-V (only pre-2011. Does not fit 2011+), CR-X, CR-Z, CR-Z Hybrid, Del Sol, Element, FCX Clarity, Fit, Fit Hybrid, HR-V, Insight, Insight Hybrid, Odyssey, Passport, Pilot, Prelude, Ridgeline, S2000 and many motorcycle models

Value Pack Of 20: Don't spend more than you have to on overpriced OEM partsour value pack of 20 is an excellent value whether you're a professional mechanic or simply someone who likes to do it yourself!

Please Note: This product is produced by Mission Automotive Parts. We have no affiliation with or endorsement from any of the other manufacturers mentioned. Our washers meet or exceed the quality of OEM gaskets (based on in-house testing)