Tools & Home Improvement From Mellbree on Amazon

Drill Bit Extension, Mellbree 3-Pack Quick Release Magnetic Drill Bit Holder Tool Kit with 1/4” Hex Shank for All 1/4-Inch Drive Bits Three Lengths 2", 4" and 6"（Magnetic force does not transmit）

Ratings for Mellbree (CPR Score)

Features

Magnetic bit holders with universal 1/4” hex shank has built-in strong magnetism to better stabilize the drill bit, and will not drop the drill bit. The quick release design makes your life and work more efficient, in one step, convenient and fast.The location of the magnetic force:The connection between the extension rod and the bit. (The magnetic force cannot be transmitted, and the bit head cannot be made magnetic!)

Bit extension for impact driver is made of stable and strong chrome vanadium steel with excellent concentricity. The beautiful red coating can provide secondary protection to the metal, which is more durable and more protective.

Show More

Mellbree HVAC Service Wrench, 3/8” 1/4” 5/16'' 3/16'' Refrigeration AC Ratcheting Wratchet Wrench Tool with Hex Bit Adapter for HVAC Tech, Gas Furnace, Air Conditioning, Refrigeration Equipment

Ratings for Mellbree (CPR Score)

Features

Service wrench is an excellent tool for HVAC repair technology. Designed for maintenance and use, compatible with air-conditioning, refrigeration and other equipment.

Double ended reversible ratchet wrench has four sizes: 3/16 inches, 5/16 inches, 1/4 inches and 3/8 inches.Four nut sizes are clearly marked, which are widely used in daily work and home maintenance.

Show More

12Pcs Adjustable Japanese Screw Punch, Mellbree 6 Tip Sizes Manual Wood Handle Hole Punch Tool for Bookbinding, Leather Craft, Paper. Rubber, Plastic and DIY(1.5, 2, 2.5, 3, 3.5, 4mm)

Ratings for Mellbree (CPR Score)

Features

Humanized Design: wooden handle, comfortable to hold, not easy to get tired after long time use. The brass discharge port is designed to discharge waste and is not easy to rust. The metal punch arm is sturdy and sharp, and it can easily punch through numerous layers of fabric.

Easy to Use: Select the desired screw punch size and tighten it to the puncher, then place the screw punch at the position you want to punch, hold the wooden handle and press down to punch the holes. It makes the job simple, much simpler than using a hammer and the rivet tool.

Show More

120 Pcs M3 Threaded Insert, 4.6mm x 5.7mm 3D Printing Brass Nuts Embedment Twill Thread Screws Heat Set Knurled Inserts for 3D Printed Parts, Automotive Plastic Shells, Notebook Plastic Shells

Ratings for Mellbree (CPR Score)

Features

Good Performance: these M3 brass nuts can be widely used in 3D printing injection molding to achieve tight fixation. Heat set Inserts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Just using tools such as a soldering iron or screws, you could easily set brass embedment screws into 3D printed holes.

Premium craftsmanship: the M3 brass nuts are manufactured with high-quality craftsmanship to ensure that all nuts have uniform and fixed standard round and twill thread knurl. The diameter of the front end of the nut is slightly smaller, so that you can easily align the nut in the reserved 3D printing hole. Compared with the ordinary straight-grain knurl, the twill thread knurlhas better pull-out and torque resistance, so that it will not shake and is easy to fix.

Show More

Keyless Chuck, 1/32" to 1/8" Replacement 4486 Drill Keyless Bit Chuck Shank Rotary Tool Quick Change Adapter Kit Compatible for Dremel 4486 Model 395 3000 4000 4300 8220 3000 7300 Multipro

Ratings for Mellbree (CPR Score)

Features

Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying.

3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty accessories）

Show More

Garbage Disposal Splash Guards, 2-Pack 3 3/8" for InSinkErator Evolution Series QCB-AM Sink Baffle with Waste Disposal Shovel Plug 2023 Removable Quiet Collar Cover EPDM Rubber Drain Insert Gasket

Ratings for Mellbree (CPR Score)

Features

Pay attention to the size before buying, this one is 3 3/8". The replacement garbage disposal splash guard is specifically designed compatible for InSinkErator Evolution series waste disposer. Diameter - 3 3/8" compatible with part QCB-AM. It should be noted that it is not compatible with the Badger series, Waste King, Whirlaway, GE. Note: If the splash guard can't drain water, please manually open the small holes on 2 sides（just tear it apart by hand）.

The quiet collar sink baffle uses EPDM, the first rubber material, which is resistant to aging, has good impact elasticity, and can be heat-resistant up to 150°C. The operating temperature range is about -50°C to +150°C. When used as a splash ring, its performance is far superior to ordinary rubber materials. The material is safe and hygienic, easy to clean. It is the best choice to replace dirty and old sink baffles.

Show More

2-Pack Keyless Chuck, 1/32" to 1/8" Replacement 4486 Drill Keyless Bit Chuck Shank Rotary Tool Quick Change Adapter Kit Compatible for Dremel 4486 Model 395 3000 4000 4300 8220 3000 7300 Multipro

Ratings for Mellbree (CPR Score)

Features

Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying. Multipro drill adapter compatible for Dremel 4000, 400, 3000, 300, 395, 398, 8220, 8200, 8100, 800...

3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty accessories）

Show More

Keyless Chuck, Mellbree 1/4” Hex Shank Conversion Drill Bit Chuck Adapter Easily Into the Power Screwdriver (0.3-6.5mm)

Ratings for Mellbree (CPR Score)

Features

This keyless chuck compatible for any 1/4” cordless power screwdriver into a drill or grinder. The clamping range of this chuck is 0.3mm to 6.5mm, please confirm your own usage requirements before purchasing.

The triangular claw solves the problem of unstable centering and has a good self-centering function. The aluminum alloy shell is more rigid and will not crack during use.

Show More

Mellbree Furniture Levelers, Heavy Duty Furniture Adjustable Feet Table Leg Levelers Support 1320LBs for Cabinets Sofa Tables Chairs Raiser (3/8”- 16 Thread T-Nut Kit with 8pcs Thickened Felt Pads)

Ratings for Mellbree (CPR Score)

Features

Heavy duty furniture leveling feet adopts a one-piece design with heavy-duty thickening and ultra-high load-bearing. Helps level furniture to match heights. Whether it is home, office, school, cafe, etc., it is perfectly suitable for use, and the thickened nylon spacer is perfectly silent and easy to slide.

Adjustable table feet: 1.75" carbon steel screw electrophoretic black with 3/8-16" thread. The height can be adjusted from 3/4” to 1 3/4”, and it is equipped with a nut fastened in the opposite direction. When installing, you can choose whether to install it according to the height adjustment. The installation nut can provide a reverse hedging force, making the leveling foot more stable and firm, and will not loosen due to long time or movement, giving you more reliable protection.

Show More

3-Pack Leather Burnisher, Ebony Wood Leather Burnishing Bit Tool with 4486 Chuck Compatible for Rotary Dremel Tool to Burnishing Leather (Pointed Tip and Multi Grooved)

Ratings for Mellbree (CPR Score)