Top 15 LittleMachineShop.com Products On Amazon (Verified to buy)
Top 1
Mini Mill Belt Drive Conversion Kit - Easy to Install and Quieter Operation - Spindle Speed up to 4300 RPM, LittleMachineShop.com (2560)
LittleMachineShop.com
LMS2560
1.9 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Compatibility 2: The small pulley has a 9 mm bore with a 3 mm keyway. The large pulley has a 30 mm bore with a 5 mm keyway. If your shafts don't match these values, then this belt drive will not fit your mill.
Top 2
Drill Chuck, 1/2" with 2MT Short Arbor - Package Designed for Mini Lathe Tailstock, LittleMachineShop.com (1148)
LittleMachineShop.com
LMS1148
1.85 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Tips: The arbor on this chuck is the correct length for the lathes listed in our product images. Don't buy this chuck for other lathes as it won't eject from the tailstock when you retract the quill.This product is specifically designed for use on the mini lathe tailstock.
Top 3
1" 4 Flute End Mill, High Speed Steel, 1/2" Shank, LittleMachineShop.com (5167)
LittleMachineShop.com
LMS5167
0.42 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
HSS 4 flute end millCenter cutting, single end
Top 4
Test Indicator Holder, Professional Grade - Clamping Diameter Range of 1-3/8" to 2", LittleMachineShop.com (3771)
LittleMachineShop.com
LMS3771
3.937 x 3.937 x 3.937 Inches
0.46 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Tips: This test indicator holder was designed for Bridgeport mills, but it works great on the mini mill. Use it to hold the dial test indicator while you tram your mill or square your work.
Top 5
Transfer Screw Set, 1/4" - 7/16" - 4 Sizes / 6 Screws Each & Wrench/Holder, LittleMachineShop.com (5970)
LittleMachineShop.com
LMS5970
0.77 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ❌ | ❌ | ❌ |
Features
Contents: This set includes 4 sizes of transfer screws (6 screws each) and the wrench/holders.Sizes: 1/4-20, 5/16-18, 3/8-16, 7/16-14
Top 6
Mini Lathe Tooling Package - This tool set includes a drill chuck, boring bar set, center drills, cut off blade, tool post and turning tools - 0XA QCTP, LittleMachineShop.com (5207)
LittleMachineShop.com
LMS5207
7.83 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Contact Us: As home shop machinist and consumers, we understand how information aids in your buying decision. We also know how frustrating it is if you cannot contact a company. If you have any questions, please feel to reach out to us and we would be happy to help. Should you have any doubts before buying a product, contact us to discuss compatibility or features. In the event you need to return something, we also ask for the courtesy of a contact to see if we can eliminate any possible issues.
Shim Stock Assortment, 0.0005" - 0.005" Plastic - 7 Sheet of 5" x 5" of Polyester Shim Stock, LittleMachineShop.com (4304)
LittleMachineShop.com
LMS4304
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
7 sheets of 5" x 5" sheets of polyester shim stockMinimal compression in use
Top 8
Key, Lathe Chuck, 8 mm (5/16") Square, Long Handle - Heavy Duty Construction, LittleMachineShop.com (5481)
LittleMachineShop.com
LMS5481
0.57 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Overview: This lathe chuck key can be used with our 3-Jaw 3" chuck, PN 1187. Unlike the chuck key that comes with the 1187 Chuck, this key has long handles. If you want the key that is provided with 1187, see product 1768.
Top 9
Mini Lathe Quick Change Tool Post Set - Horizontal Cut - Off - Designed for lathes with up to 8" Swing 0XA, LittleMachineShop.com (3112)
LittleMachineShop.com
LMS3112
4.43 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Included Items: This set includes 2 - #1 Turning & Facing, 1 - #2 Boring, Turning & Facing, 1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars and 1 - #7 Universal Parting Blade (for 1/2" cut-off blade - horizontal)
Top 10
4 Flute Ball End Mill Set, High Speed Steel, 6 Piece - Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end Mills, LittleMachineShop.com (2903)
LittleMachineShop.com
LMS2903
0.75 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
6 piece HSS end mill set4 flute ball (round end) end mills
Top 11
Adjustable Machinist Parallels Set - Adjustable to the following sizes: 3/8” - 1/2”, 1/2” - 11/16”, 11/16” - 15/16”, 15/16” - 1-5/16”, 1-5/16” - 1-3/4”, 1-3/4” - 2-1/4”, LittleMachineShop.com (2552)
LittleMachineShop.com
LMS2552
1.95 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Uses: 1)Measuring the width of a slot; adjust the parallel so it fills the slot, then measure the parallel. 2) Setting the angle on a sine plate or vise. 3)As an adjustable gage block.4) For leveling or adjusting odd-shaped work pieces in a vise. Adjustable parallels are not generally used like the parallels you use in a vise.Parallels Sizes: Parallels are adjustable to the following sizes: 3/8” - 1/2”, 1/2” - 11/16”, 11/16” - 15/16”, 15/16” - 1-5/16”, 1-5/16” - 1-3/4”, 1-3/4” - 2-1/4”. The parallels are 5" long and 1/4" thick.
Top 12
Vise Mounting Kit, 7/16" T-Slot - Includes 2 each studs, T-slot nuts, flange nuts, and hardened washers, LittleMachineShop.com (3125)
LittleMachineShop.com
LMS3125
0.34 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Stud Size: The studs in this vise mounting kit are 3/8"-16 x 2".
Top 13
R8 Collet Set (Metric) - 10 Piece Set - Metric sizes 3, 4, 5, 6, 8, 10, 12, 14, 18, and 20 mm - Made of High-grade Tool Steel - 7/16"-20 Drawbar Thread, LittleMachineShop.com (5915)
LittleMachineShop.com
LMS5915
5.81 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
| jinjing hardware machinery | - | ✅ | ✅ | ✅ |
Features
Sizes: Set of ten R8 round collets to fit spindles with a R8 taper. Metric sizes included: 3, 4, 5, 6, 8, 10, 12, 14, 18, and 20 mm.Durable: Collets are made from high-grade tool steel and are precision ground and hardened.
Top 14
Drill Chuck, 1/2" with R8 Shank - Chuck Key Included and High Degree of Accuracy, LittleMachineShop.com (1396)
LittleMachineShop.com
LMS1396
2.49 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Drill Chuck: 1/32" - 1/2” Capacity drill chuck with a 33 Jacobs taper arbor that has an R8 Shank. Chuck has a hardened ground center jaw that improves durability and ensures straight alignment. The chuck’s runout is 0.008” (0.20 mm) or less.
Top 15
Small Ball and Radius Turning Tool - Designed to Cut Round Shapes or Curves in Brass, Aluminum, Steel, Wood or Plastic on your Bench Top Metal Lathe, LittleMachineShop.com (2569)
LittleMachineShop.com
LMS2569
0.23 Pounds
| Seller | CPR Rank | Amazon Fulfilled | Prime | Free Shipping |
|---|---|---|---|---|
| LittleMachineShop.com | - | ✅ | ✅ | ✅ |
Features
Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options.Versatile: The small Ball and Radius Turning Tool is designed to cut round shapes or curves in brass, aluminum, steel or plastic on your own small lathe. On most lathes, the Ball and Radius Turning Tool will fit in standard tool holders. The tool is designed so that the center height is 1/4" from the bottom of the shank, so that on lathes like Sherline or Taig, which use a standard 1/4" tool bit, little or no shimming is needed. On other lathes, the tool can be easily shimmed to center height.
Our LittleMachineShop.com Review
LittleMachineShop.com products on Amazon (Sep. 2026)
What to buy from LittleMachineShop.com?
LittleMachineShop.com sell products mainly in the Industrial & Scientific category.
Its popular products on Amazon include Shims & Shim Stock Raw Materials,Shim Stock And Corner Rounding End Mills.
If you intend to buy any of these products, then you can find them easily on Amazon.
Featured Reviews Related to LittleMachineShop.com
8,773 Reviews Analyzed
3,026 Reviews Analyzed
415 Reviews Analyzed
LittleMachineShop.com Pricing
The brand has over 621 products listed on Amazon with a price range of $1.95 to $1,999.00 form our picks.
Currently, the average price of their product is $119.39 which is considered affordable. You can make your choice from the list of products offered by the LittleMachineShop.com.
Is LittleMachineShop.com a good brand?
A brand is an essential factor when making a purchase. What do we think about the LittleMachineShop.com? Well, according to the information available on Amazon, LittleMachineShop.com products are sold by LittleMachineShop.com.
The seller has received about 1,152 feedbacks from buyers with an average start rating of 4.8. With a rating as this from the number of feedbacks, we can conclude that LittleMachineShop.com is Liquid error: comparison of String with 4.8 failed
Can I know who the owner of LittleMachineShop.com is?
LittleMachineShop.com is selling on Amazon's North America Marketplaces. You can find out the actual owner of the brand at https://www.uspto.gov/trademarks/search.
From there, you can tell whether Amazon owns the brand or not. If you want to buy Amazon branded products, you can go here, and list some of their top brands. Amazon owns 100 private-label brands that operate in different markets.
Related Amazon Store for LittleMachineShop.com
4.8(1,152 ratings)
Similar Competitors Brands like LittleMachineShop.com on Amazon
- Blulu
- Stock Your Home
- uxcell
- Swpeet
- Drill America
- Glarks
- Tebery
- Small Parts
- HHIP
- Accusize Industrial Tools
- K & S Precision Metals
Methodology
How We Evaluated LittleMachineShop.com Products
We are crawling & scraping a large amount of data from 621 LittleMachineShop.com products and a countless number of reviews, you can gain valuable insights to enhance your understanding of various aspects related to LittleMachineShop.com, and you can use those data to help you make informed buying Shims & Shim Stock Raw Materials,Shim Stock And Corner Rounding End Mills decisions. Those recommend the 15 best products from LittleMachineShop.com based on thorough analysis and research by our CherryPicks-AI ranking system.
Why create this buying guide?
Our brand guide is designed to provide up-to-date & unbiased information about LittleMachineShop.com products. Our goal is to empower you with data-driven insights, enabling you to make better shopping decisions efficiently to save time. We prioritize earning your trust by providing reliable information and guidance.
Who is selling LittleMachineShop.com on Amazon?
According to the information we have, currently there is only one seller (LittleMachineShop.com) offering this brand, and we have not found any other Amazon stores engaging in reselling LittleMachineShop.com.
- LittleMachineShop.com: 1,152 Yearly Feedback, Avg. Ratings 4.8
| Rank | Name | Yearly Feedbacks | Avg. Ratings |
|---|---|---|---|
| #1 | LittleMachineShop.com | 1,152 | 4.8 |
It's important to note that this information is based on the data available to us, and there could be additional sellers or circumstances that we may not have identified. However, as per our findings, the brand seems to be exclusively offered by the single seller mentioned.