Industrial & Scientific From KOYOFEI on Amazon

Effortless one-hand filament feeding, user-friendly design.

Reinforced extruder gear: The extruder gear is heavily reinforced with high wear resistance and durability.

Wide Compatibility: Can print any 1.75mm filament and is compatible for printing soft material such as TPU with Bowden extrusion.

Teflon Tube + Upgraded Throat Tube--Low feed-in resistance for better extrusions, ultra-thin wall with 0.4mm thickness, perfect heat insulation,throat tube can significantly reduce the probability of hotend clogging.

Smooth Filament Feeding --The combination of Pheumatic fittings and Φ5 clamp prevents the teflon tube from loosening and getting you seamless feedings.

Compatible Models: This full hotend compatible with CR-10 V2/CR-10 V3 3d printer. Official accessory that can be used to replace or update the previous hoend kit to improve the quality of the printed model.

High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.

Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.

What You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)

Size: 194x122x0.33mm, perfect for 8.9-inch monochrome screens, compatible with ELEGOO Saturn, Saturn S, Mono X, Creality Halot Lite and other resin 3D printers with 8.9-inch screens.

Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective film and install the tempered film on the monochrome screen. Use a plastic scraper to avoid air bubbles. After the installation is completed, please use cleaning fluid and The non-woven fabric wipes the tempered film clean.

Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after installing the tempered film.

Heat-resistant from -240 ° C to 205 ° C and durable quality for long-term use.

Contains an easy-to-follow package tutorial that guides you on how to replace the FEP film.

Understandable instructions are included, which are printed on the packaging and explain how to change the FEP film.

Size information: The size of the magnetic steel plate is 135 * 75mm, and the thickness of this platform is 3-4mm, compatible with ELEGOO Mars and Mars Pro. Due to the thickness of the product itself, the printable height of the 3D printer will shrink by 3-4mm. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.

Unique handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.

Installation Tips: First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated, then install the spring steel plate on the magnetic base, last reset the printer's leveling settings to start printing .

【Efficient Heating and Cooling 】--Heating block+cooling block+fan, nice temperature control uniform and reliable printing.

【Newly Upgraded Throat Tube 】--With ultra-thin 0.35mm thickness, it reduces the heat loss of the heating block and enhances the working stability of the nozzle.

【Superior performance】--With high quality teflon tube, educe clogging, smooth filament feeding, special design thermistor and heating tube, rapid heating, precise temperature contral, detection temperature up to 260℃. Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.

Better printing quality: nFEP film, with its excellent peeling performance and smaller deformation during peeling, allows the printed model to have better print quality and rich details. More suitable for large-format SLA and LCD 3D printers.

High light transmittance: nfep has a light transmittance of more than 95% and can withstand a high temperature of 220°C, which means that it can work better when printing large models for a long time.

Dimensions and applicable models:The size of nfep film is 200x140x0.127mm, a set contains 3 pieces. It is compatible with Elegoo Mars, Mars Pro, Mars 2, Mars 2 Pro, Photon Mono, Mono SE, Sonic Mini 4K, Halot One, LD-002R, etc. 5.5‘’ & 6.08‘’ resin 3D printers.

High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.

Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.

What you get: 1 stepper motor PC 42-34 (Note: This item does not include a connection cable or screws.)

【Superior performance】--With high quality teflon tube, educe clogging, smooth filament feeding, special design thermistor and heating tube, rapid heating, precise temperature contral, detection temperature up to 260℃. Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.

【Easy to installation】--One-piece structure design, pre-installed, easy to install quickly, open a new 3D printing experience. With insulation silicone sleeve, flame retardant mataterial and good insulation effitively keeps heating block and nozzle clean.

【Packing List】-- 1* CR-6 SE hotend, 1*teflon tube, 1*auto-leveling sersor, 1*metal shell, 1*Blower fan, 1* fan, 1*LED blue light, 1*silicone case, 1* 0.4mm nozzle, 1*X axis slider .