Industrial & Scientific From KOOTANS on Amazon

SIZE --- Single rod length: 1.1FT/0.33M, Diameter: 0.16inch/4mm (can work in narrow areas). Rods can be used individually or screwed together for required length, can be extended up to 11 feet, and together with 6 accessories, can be used in differing situations for pulling wire, snagging wire, etc.

HIGH VISIBILITY --- Electrical fish tape rods are colored with a bright yellow to be able to locate and differentiate the rods from wires easily. Also it is wear-resistant, corrosion-resistant and anti-oxidation, longer lifespan.

CONVENIENT STORAGE --- 10pieces 1.1FT fiberglass rods and 6 different accessories in one transparent plastic tube case with yellow silicone rubber end caps. It can be hung and no need to worry about end cap damage. A great handy kit to keep everything tidy and tucked away without taking up much space.

【POPULAR SIZES】24 Popular Sizes O-Ring Sealing Washer. You may not don't know what size you need. Fortunately, all the sizes of this O-ring kit are enough to allow you to cope with various family needs. Metric sizes from 6mm to 28mm O.D., according to different sizes provide 1.5mm/2.4mm/3.1mm 3 reasonable thicknesses. For more details, please refer to our size picture.

【CONVENIENT STORAGE】1200 pieces NBR rubber o rings are stored in a sturdy transparent plastic box with labels, saves you effort in tidying up and choosing sizes. And 1200 pieces are enough that will keep you going for months or even years. You don't have to go to a hardware store.

【WIDE APPLICATION】Nitrile rubber metric o rings prevent leaks in fuel or water plumbing, machinery, hydraulic, and pneumatic connection; provide secure seals for any oil, air, gas, and water seal application(faucet, sinks, filters). Used to electronic equipment, pipes, tap faucets, pumps, solenoids, gauges, sensors, trucks, cars, motorcycles, boats, engines, spray guns, pressure washers, and more.

DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod.

EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping.

WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.)

SPRING JOINT: more durable, joint is not easy to damage. BRASS CONNECTOR: good anti-corrosive and anti-rust properties. Red and Blue handles for easy identification and quick connection.

ELECTRIC CABLE USE HIGH QUALITY COPPER, good heat and electricity conduction, safe and efficient.

REPLACES: Tectran 13S15401, Tectran 169157, Tremec Sloan 455180DSET, Tremec Sloan️ 451098, Philips 11-8115, Phillips️ 30-2171, etc.

Barbed edges provide excellent connection, deeper and smoother threads design makes work easier and more effective.

Adapter for connecting a hose to a male threaded connection.

Temperature range from -40 to +160 degrees F.

【Good Sealing】- 2 pieces 1/4 NPT female x 3/4" straight male brass fittings with 1 metal wave ring.

【Work Environment】- 1200 psi maximum working pressure; Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).

【What Can You Get】- 2 pieces brass bulkhead fittings with metal wave ring, Friendly Customer Service. If you are not satisfied with this product, please don’t hesitate to contact us, we will supply 100% Money Back, ensure your no risking purchasing.

FUNCTION - Used to connect female pipes with same diameters, or extending the pipe length. Apply to plumbing connections, compressed air, hydraulic, refrigeration, instrumentation, gas and other applications, hex nipples for easy tightening and loosening.

Operating pressure: 1200 psi, Temperature range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.

NPT TAPER THREAD - The standard NPT taper threads allow the brass fittings better mesh with the object, strengthen the fixation to prevent leakage. The threads are smoother, the installation is easier and faster.

2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, 3D carvers, CNC Routers, CNC laser cutters,CNC plasma cutters, Robotics Projects, etc.

Rigid connection, used to connect pieces of 20mm aluminum extrusion at a right angle.

Package include: 4pcs L shape aluminum outside joint plates.

FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.

Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.

These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.

SLIDER SIZE: Length 10mm, height 4.5mm, width 9mm; step width 6mm, step height 1.5mm.

Sliding nut can only be inserted into T slot from the end profile, it owns the most excellent connection strength and reliability. Very easy to be slide into T slot of aluminum profile.

2020 Series Aluminum Profile Sliding T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, etc.