Tools & Home Improvement From Huanyu on Amazon

NOTE: These are only special blades for the Huanyu hot knife. Hot knife handle and other accessories are not included.

HOT KNIFE MATCHING: For B07PRPX2HH/B071HTNRD3/B071HTQ7M2/B0716XMJRM/B071Z6ZVPR. You can search and purchase them on Amazon.

【Powerful 900W Pure Copper Motor】Huanyu Electric Rebar Bender adopts 900W pure copper motor with strong power. It can bend 5/8inch (#5 16mm) rebar 0-130° within 5s. Low noise and low failure rate when running. Longer service life.

【Solid Machine Body】Huanyu Rebar Bending Machine adopts sturdy cast iron body and high-strength bend block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender.

FAST HEATING, SMOOTH CUTTING: Huanyu hot knife can heat up to 600 ℃/1112℉ in 6s. The pure copper hot knife cutter makes cutting faster, and the edges of materials can fuse quickly without generating debris.

ADJUSTABLE TEMPERATURE, SAFE OPERATION: 110V 100W electric hot knife is equipped with a total of 9 adjustable temperature ranges of 50-600℃(122-1112℉), which can be flexibly controlled by rotating the knob; Safe fabric cutter, press and hold the switch to heat, release to immediately stop.

[Basic parameters] PTFE Liner Maximum temperature: 200 ℃, Security temperature: 180 ℃, Maximum pressure: 4MPa, Security pressure: 3MPa，Heating/Cooling Rate: 5 C/min

[Liner] The PTFE liner has no dead angle, high lubricity and non-stickiness, high temperature resistance, high pressure resistance, corrosion resistance, physical inertness and almost insoluble in all solvents.***Additional lining:PTFE Lined Search *B071KF7K7S*; PPL lined vessel liner Search *B071GTP1JP*

DUAL TAMPERATURE CONTROL: Our frame heater is available in two temperature options: low temperature 140-167℉, high temperature 248-284℉ (ambient temperature 77℉) to fully meet your frame heating requirements. Please be careful to prevent burns during use

FAST HEATING 30s: If you choose high temperature mode, the 201 frame heater can quickly heat up to 284 ℉ in 30 seconds. Caution: To avoid damage, we recommend that you start from a low temperature when heating thin frames.

【Safe & Durable】Each exclusive designed nozzle has 81 outlet holes. Water column is gathered, no splash. Cleaning efficiency is increased by 50%. Built-in decompression sponge effectively reduces water pressure.Gentle water flow will not hurt the eyes. Thickened ABS plastic basin, stainless steel+anti-corrosion coating support. suitable for strong acid & alkali environment. Easy to clean & more durable. 250mm diameter larger basin can better collect water & keep ground clean.

【Standards Compliant】Comply with American ANSIZ358.1-2014. Important parameters are as follows. Inlet Size: 1/2" female thread(DN15); Outlet Size: 1" internal thread(DN 25); Eye wash flow rate: ≥12 L/MIN; Duration time＞15min; Diameter of eye wash basin: 250mm(9.84"). Applicable for narrow spaces, easy and quick to install.

APPLICABLE: Used for large stroke, non-quantitative, large load lifting adjustment

Travel Range: 60mm--Load Capacity: 20kg

ACCURATE DIOPTER: The diopter of our schematic eye is accurate, with an error of less than 0.25 Unit D. Its adjustable range is +4.00D to -5.00D.

3 PUPIL SIZES: Our model eye has three difficulty levels with different pupil sizes:φ3, φ5, φ7, which can simulate small pupils, ordinary pupils, and dilated pupils.

SIMPLE & ACCURATE: Compared with those printable rulers, our digital PD meter adopts high precision sensor and advanced intelligent electronic system to display the measurement results digitally, which is intuitive, accurate and easy to operate. (Please bring your own 2 AA batteries, Not Included in the package)

MEASURING ACCURACY: ±0.1/0.2/0.5mm is adjustable: According to the accuracy requirements of the actual glasses, set the measurement step increment, that is, accuracy, instead of fixed 0.5mm, the measurement results are more reliable.

【FAST ! FUSION ! SMOOTH !】100W power, heating to 1112°F (600°C) in 6 s,can work continuously, and can also adjust the temperature steplessly; The sharp blade allows the edges to fuse quickly to avoid loose lines and achieve silky cutting!

【Pro Knife Seat & Connection Frame】: Pure copper knife holder, more efficient heat conduction; knife holder connected blades to protect the front shell of the host; metal tail hooks are more convenient to hang and place; compact integrated body, better holding feeling!