Industrial & Scientific From HFX on Amazon

Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore

These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid).

This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline.

Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open).

Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion.

Has two 1/4"air ports and one 1/4"breather port. Comes with: 1/4" 4-Way Solenoid (2) 1/4"Male Straight fittings with 1/4"push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead

Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open).

Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion.

Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead

Then, when the solenoid is triggered again, air is supplied through the top hole, retracting the cylinder rapidly and keeping the cylinder closed. Great for quick motion, scare props, and for making an in-out or up-down motion in a prop

Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore: This is the measure of the diameter of the cylinder.

These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid).

bronze muffler

sintered muffler

solenoid

You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly.

Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore: This is the measure of the diameter of the cylinder.

Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure

Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open).

Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion.

Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 4-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead

You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly.

When the solenoid is triggered again, air is supplied through the top hole, retracting the cylinder rapidly and keeping the cylinder closed. Great for quick motion, scare props, and for making an in-out or up-down motion in a prop.

With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure.Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline.

bronze muffler

sintered muffler

solenoid

Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open).

Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion.

Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 4-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.