Tools & Home Improvement From HEATIT on Amazon

Provide constant reliable holding power for heat cable on roofs

Commercial grade clips secure all major brand heat cables to roofs

Two year limited product quality warranty.

HEATIT aluminum foil tape can stick well to most surfaces by its high quality acrylic pressure sensitive adhesive. A clean, dry and free of oil or grease surface is necessary before applying HEATIT aluminum foil tape

Flame retardant, UV resistant, Chemically resistant. Perform well in thermally conductive. Improving the heating and cooling efficiency

Idea for Indoor and outdoor applications: pipe heating cable attachment, duct insulation, general repair, cold and hot air ducts, HVAC, aluminum sealing, copper pipe fixing etc

Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.

Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.

Testing the cable before the installation. Uncoil the cable, plug in the heat tape for water pipes and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.

Integrated Thermostat for Energy Efficiency : Equipped with a built-in thermostat, this heat trace for pipes is set to activate at 3 degrees Celsius and deactivate at 10 degrees Celsius. By automatically regulating the power output, the heating tape operates only when necessary, ensuring energy savings without compromising performance. Now you can have peace of mind knowing that your water pipes are safeguarded against freezing while minimizing energy consumption.

Easy Installation and Versatile Length Range: With pre-installed features, our pipe warp heat tape is incredibly user-friendly. Simply follow the instructions, and you'll have it up and running in no time. The heat tape can be used by straight, spiral and overlap. Available in lengths ranging from 3ft to 120ft, you can easily find the perfect fit for your specific application. From small residential pipes to large industrial systems, our pipe heating cable has you covered.

Suitable for Various Pipe Types : Versatility is a key feature of our water pipe heat cable. It is compatible with both metal and plastic water pipes, providing reliable freeze protection for different pipe materials. Whether it's copper, PVC, or stainless steel, our cable offers unparalleled performance, ensuring your pipes stay safe and functional even in harsh weather conditions.

Easy installation to control your floor heating system(s) up to 15A

Three sensor applications are available: Room: Controls room temperature based solely on built-in sensors. Floor: Controls the floor temperature based solely on the floor sensor. Room.Limit: Controls the room temperature based on the built-in sensor while monitoring the floor temperature not to exceed the upper limit.

HEATIT ET-72G is Non-WIFI version. 4 Year limited warranty

Safe and Easy Installation: Enjoy peace of mind with a pre-assembled cable that can be installed by crossing, overlapping, or spiraling. The included 3ft power cord with a plug and indicator light ensures safety and convenience.

Energy-Saving Performance: This heating cable automatically adjusts its heat output based on ambient temperature conditions. It increases heat output in cooler conditions and decreases output as the temperature rises, resulting in energy savings.

Reliable Customer Service: Count on our dedicated customer service team to provide professional feedback within 24 hours, ensuring your satisfaction and support throughout your usage experience.

Approved for use in non-hazardous area (ordinary) locations with HTR, HTS, HTP series heating cable.

Approved for use in hazardous area (Class Ⅰ, Div 2; Class Ⅱ, Div2; Class Ⅲ) locations with HTR series heating cable only.

Installed on the pipe under insulation and/or cladding. Rated NEMA 4X. Maximum current: 32A. Voltage: 110-120V, 208-277V. Maximum Continuous Exposure Temperature (T5): 212℉(100℃)

Strong Adhesive: Strong adhesive backing, stick firmly, waterproof and non-degumming, great weather stripping for doors and windows

High Density: CR foam, has excellent sealing and resistance to deformation feature, can be used from -40℃ to 105℃, Weatherproof, Oil resistance, resistant to corrosion, dustproof, shock-absorbing, sound and heat insulation, anti-skidding and insulating.

Widely usage: Widely used in various door seal and window insulation, furniture, electrical cabinets, cars, speakers, toys, handicrafts, sports equipment, etc

Protect pipes up to 2 1/2" in diameter. For better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material. Pre-assembled, Including grounded plug with light, easy to install and use without built in thermostat. 120 volt, 5 watts/ft at 50 degrees F for pipe freeze protection.

Roof deicing application: Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 6W/ft at 32°F (0°C) for roof deicing. For roof deicing applications, you may need to buy clips and hangers separately.

Testing the cable before the installation. Uncoil the cable, plug in the heating cable Normally you can feel the slight warm on the heating cable in few minutes.

Roof deicing application: HEATIT JHSF1 was designed to prevent the ice dam formation not to melt the ice dams which were already formed. Please turn on the cable at the beginning of snowing. Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs, and so on. Rated 10W/ft at 32°F (0°C) for roof deicing. For the roof deicing application, you may need to buy clips and hangers separately.

Designed to maintain water temperature in the supply piping system, reducing or eliminating the delay in obtaining hot water at each fixture. You don’t need to run showers or sinks for long periods of time to draw new hot water into the unit, which is a significant waste of water. Simply wrap the self-regulating heating cable around your hot water lines within the house to provide you with instant hot water. It is an energy-efficient and economical alternative to common re-circulation systems.

Clips included 10 aluminum roof clips for approximately 7 linear feet of roof edge. You can use roofing adhesive or roofing nails to install the clips. The holes in each clip can make the clip more stable on the roof. Please buy the seal, adhesive, or roof nails separately. Can be used on various roofs such as metal, asphalt, slate roofs, etc.