Tools & Home Improvement From GoControl on Amazon

Works with Alexa for voice control (hub required, Alexa device and hub sold separately).

Z-Wave compatible - Ver. 4.5.5

Compatible with virtually any non-smart garage door opener

Z-Wave Plus Cerification

Controls Z-wave Light Bulbs, Switches & Dimmers Wirelessly

Built-in Z-wave Radio

The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).

This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

A Must Buy Item.

Built To Last.

The WD500Z5-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection. The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status.

Take control of your home. Use this switch to wirelessly control and schedule Small appliances and lights in your home from anywhere using a Z-Wave certified gateway

Tamper resistant per nes standards

Replaced by PD300EMZ5-1

A Must Buy Item.

Built To Last.

The PS15EMZ5-1 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).

This plug-in Appliance Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).