Automotive From Gelessy on Amazon

🔧【COMPATIBLE】- 5432598 5436576 5435323 5432119 Every Product has Quality Inspection before Leaving the Factory. Extreme Temperature Tolerance

🔧【PACKAGE INCLUDES】- 8 Rear Stabilizer Support Bushing + 1 Extra Gift. Easy to Install, but still Recommended to be Operated by Professionals

🔧【GUARANTEE】- Verify the Model You Purchased. If You have any Questions, You can Contact us by Email to Ensure You a Truly Worry-free Shopping Experience

🔧[HOW TO CHECK] - With the engine off, remove the valve cover and connect the pressure gauge. Start the engine and read the fuel pressure at the intermediate position between the idle speed and the accelerator pedal. If the pressure is higher than the value indicated by the manufacturer, or does not change with the position of the accelerator pedal, the pressure regulator may be damaged and it is recommended to replace it in time

🔧[PACKAGE INCLUDES] - The products include 1 Fuel Pressure Regulator (IPR ); 1 Diesel Injection Control Pressure Sensor (ICP) and some wiring harnesses as shown in the figure. In addition, there are additional products included in the product. I hope it will be helpful to you during your installation process

🔧[WARRANTY] - Please confirm your vehicle model before placing an order. Our products provide warranty service. If you have any questions about the product before or after placing the order, you can contact us at any time

🔧[HIGH QUALITY] - This ignition lock housing has a thicker and stronger internal cam. Made of high-quality aluminum and plastic, and is lubricated with silicone grease. The quality is tested and durable

🔧[INSTALL] - Ignition Lock Housing is easy to install. We will put towels or gloves in the product, hoping to help you during the installation process

🔧[VERIFY MODEL] - Please confirm your vehicle model before placing an order. Our products provide a lifetime warranty. If you have any questions, please feel free to contact us

🔧[EASY TO INSTALL] - Our Center Console Cup Holder Pad is Easy to Install. After Removing the old parts, you can Install it without Tools, and it can be Done in a few Minutes

🔧[PACKAGE INCLUDES] - 1* Center Console Cup Holder, we will put Additional Products in the Product, Hoping to Help you when you Replace the Parts

🔧[VERIFY MODEL] - Please Verify the Model before Placing the Order. If you are not Sure whether the Product is Suitable for your car, you can Send an Email to Contact us for your Confirmation

🔧[HIGH QUALITY] - IP68 waterproof standard allows your Rear view Backup Camera to work normally in rainy or dusty weather. The shell is made of high-quality materials, which can cope with extreme weather. The product is equipped with "ON/OFF" parking line, which is available for a variety of choices

🔧[INSTALL] - Installing Tailgate Backup Camera is easy. Each of our tailgate handles includes wiring. Before installation, we must first make sure that everything is normal and as expected. (You can refer to the details below for the installation process)

🔧[VERIFY MODEL] - Before placing an order, please confirm your car model. If you are not sure whether the product is suitable for your vehicle or if you have any questions about the product, you can contact us to answer it for you.

🔧[FUNCTION] - Accurate AFR data is critical when tuning an engine. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency.

🔧[HIGH QUALITY] - Every air fuel ratio gauge features a 0-5V analog output, compatible with data loggers and practically any engine management system. In use, it’s highly responsive and accurate, thanks to a UEGO sensor housed inside.

🔧[INSTALL] - Thanks to its 52mm housing, the versatile gauge will fit into the majority of gauge pods. The gauge also features interchangeable faceplates and bezels, making it simple to achieve the ideal look for your car. To help you get started, the device comes with everything you’ll need for a hassle-free installation.

Easy installation (generally less than 1 hour for the non-mechanic), it's not necessary to remove your primary chain

you can have the proper chain tension during acceleration and deceleration with the big benefit of improved shifting

Package includes a set of Primary Chain Tensioner kit, We will provide you with towels or gloves in the product, Hoping to Help you During the Installation Process

🔧【PACKAGE INCLUDES 】- Handle, Bezel, Latches, Cables, Hinges, Rods, Clips, and Bolts. As Shown in the Picture. In Addition, we will Give you an Extra Gift. Thank you for your Purchase

🔧【INSTALLATION】- Engineered to Stringent OE Specifications, Built-in Quality ABS Plastic＆Alloy Material, it is sure to Exact Installation and Function the same or even Better than the Original part

🔧【WARRANTY】- Our products provide a 3-year warranty service, if there is any problem with the product after purchase, you can always contact us for a replacement or refund.

🔧【COMPATIBLE】- Compatible with Chevy Silverado GMC Sierra 1500 2500 3500 Tailgate Handle Latch and Bezel Trim with Rod Clips 15228539, 15997911, 5921949 (More models are below)

🔧【INSTALLATION】- Engineered to Stringent OE Specifications, Built-in Quality ABS Plastic＆Alloy Material, it is sure to Exact Installation and Function the same or even Better than the Original part

🔧【WARRANTY】- Our products provide a 3-year warranty service, if there is any problem with the product after purchase, you can always contact us for a replacement or refund.

🔧【COMPATIBLE】- F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013, PR315, PR1315

🔧【INSTALLATION】- Easy to Weld and Install, the IPR (Injection Pressure Regulator) is Located on the Back of the High Pressure Oil Pump which is Located Under the Fuel Filter Assembly

🔧【GUARANTEE】- Our products come with a 2-year warranty, if you have any questions about our products after purchase, you can contact us at any time.