Industrial & Scientific From FYSETC on Amazon

Strong Adhesion: Customized material PEI makes your print easy to adhere and has a wide compatibility of filaments, including ABS PETG Wood TPU PLA etc, No need to paste any glue. Comes with Strong Sticker Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about the loss of performance. You also can cut it to fit for your any bed size.

Easy to use: Peel off the back paper on magentic base and stick it to the heated bed, then align the steel plate on the base. The side with PEI is upside to print on. After installing, please keep your heat bed level. The pei is a little thin, please mind the distance between nozzle and surface to avoid scratching it. Please take off the protective film(some may have, some may not) on the PEI surface before printing. When completed printing, please let the steel plate cool down, easy to remove.

Kind Tips: We have sticked the PEI on one side of the steel plate by machine, so you don't need to worry about the bubbles any more. If you receive the package but found the air bubbles or scratches, please don't worry, they are the under the film, PEI will not be affected. Clean the pei surface with alcohol or lightly scour it with wild steel wool with 400 grit to have good adhension.

Operation Voltage: DC 24V

Cable Length: 400mm/15.7inch

Package included: 3Pcs* 6020 DC 24V Extruder Hot End Fan

Comes with Strong Magletic Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about loss of performance. You also can cut it to fit for your any bed size.

Before printing, please remove the protect film which stick on the PEI surface, attach to your print bed via the Magletic Mounting Base, if necessary, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!

Kindly Tips: Please tear off the surface protector which stick on the PEI surface. The PEI side is printing side, We have helped you stick PEI on the steel plate, use machine, so you no longer need to worry about bubbles. if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.

PEI compatible with most filaments, include PLA/ Carbon PETG/TPU/ Wood etc, may not work well with ABS. Before printing, Please remove the protect film which stick on the PEI surface, so if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.

Steel Spring Material: steel, thickness about 0.5mm, the side with PEI is to print on. Generally positive and negative side can be reused.

After the printing is done, let the steel plate cool down, then flex it and pop the prints off, easy to reomve it, using sharp tools will scratch the pei. Between printings,clean the pei surface with steel wool pads with detergent..

More reasonable length for installation, compatible with Vorn 2.4 350mm Size(Build Volume)

Package includes 3pcs cable chains, 2pcs *10x11mm, total Length about 465mm with 25 Joints in the middle and 1pcs*10x15mm, total Length about 547mm with 30 Joints in the middle.

Kindly notes: VORN 2.4 Requires a printed model of the three-hole configuration to install the tank tow chain. You can download the three-hole configuration directly from the official site:VornDesign/Help/Github to find VornUsers.(Please refer to the left picture)

PEI compatible with all most filament, include PLA/ Carbon PETG ABS/ TPU/ Wood etc. Kindly Tips: We have helped you stick PEI on the steel plate, so you no longer need to worry about the bubbles. Before using, please remove the protect film which stick on the PEI surface. so if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.

Sticker Base: high temp-resistant with high temp adhesive, easy installation and easy to remove. You also can cut it for any size.

Steel Spring Material: steel, thickness about 0.5mm, positive and negative side can be reused. After installing, how to auto-leveler: turn the metal part upside don so the uncoatd metal is facing up. Apprently the auto-leveler uses electric current to do it's thing. The PEI side is not so good..

Strong torque -Holding torque up to 120mN.m, Low loss stators have good thermal control ability, have the same parameters(rated voltage DC 6.5V&current 0.5A) and performance good, a perfect replacement.

Made of high quality stainless steel, lightweight and durable.

Package includes:1x motor with integrated cable 47.2 inch long.

Fully assembled, easy to install and use. SLS molding shell, made of PA, sturdy and durable,Light weight, about 122g, the cable about 1.2 meters. Please search: 4807684 on thingivese to print the firmwares if need. About the installation, please refer to the video on the left. If need the individual 36mm motor, please search Asin:B099JMJNH2 at our store.

After replacing the extruder, you need to modify the E-axis step value of the extruder according to your own machine, for example the E-axis step value of Ender3 is 870.

Here are some things to be Aware of: The drive current of the extruder Must to be adjusted to 0.3-0.35A (method: adjust the voltage to about 0.28-0.3V or adjust the E-axis drive current by firmware) to Prevent the motor from Overheating . How to modify the extruder pulse: Method 1: Modify the extruder pulse by firmware: #define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 870}, Method 2: Send G code (can be sent by slicing software command): M92 E870 M500.

Made of high quality stainless steel and strong sticker base, easy to install: stick the sheet base to your build plate by tearing off the back paper, then align the steel plate on it. The side with PEI is upside to print on. Please peel off the protective film on the surface before printing.

When printing completed, please let the plate cool down enough, then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.

Kindly Tips: We have sticked PEI on the steel plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, please don't worry, they are the surface layer, PEI will not be affected. Please note The Pei sheet is a consumable.

After installing,this extruder runs smoothly, the meshing gear has a large torque and the consumables are not easy to slip; easy to adjust the feeding and retreating of consumables

The printing effect is better than other extruders, and the prints surface is smoother and more delicate. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

Easy to install and use. Method 1: use firmare to modify the extruder's pulse:#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 692 }; Method 2:Send G code (can be sent by slicing software command):M92 E692 M500. If find the direction of motor extrusion opposite, change the motor line sequence 1-4 swap; 2-3 swap.