Industrial & Scientific From E-Simpo on Amazon

All Voltage workable: 100-250V AC Flame Retardant PBT, Phosphor Bronze. If you don't know how to remove or don't plan to ask an electrician to remove the ballast, please DO NOT BUY!THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.

GY24d to E26: Works for 2-Pin Ottlite CFLCFL SB20-M (or SB25-P) B34J32, B34J35-CA, B84J35, B84J33, SL20B, SB20-M-FFP.

Allow you install G4/G5.3/Gu5.3/MR11/MR16 into Socket/Fixture

All voltage workable 100-250V 2A 100W

Porcelain Material,High quality, stable performance

Length 135mm/5.3"*D27mm/1.0" , replace CFL PL-S 7W Please check your old fixture allowed install length.

Replace Compact Fluorescent Lamps/CFL widely used in Recessed/Surface-mounted Down lights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches.

Both 110V 220V AC CRI>82 high brightness 2835 SMD, Warm White 3000K Daylight 6000K Optional

Flame Retardant PBT, Phosphor Bronze.100-250V workable,Physically change the contact and socket, DON'T Change any voltage

All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the l

All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.

There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin-based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.

All pin-based CFL, like GX24Q G24d Gx24d GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.

There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin-based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.

All pin-based CFL, like G24d Gx24d GX24Q GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.

Works for 4-Pin CFL with G24q-1 Base:10w 13w Quad Tube; GX24q-1 Base:10w 13w Triple Tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube

All voltage workable 100-240V, Rated 500V2A. For Panel Thickness A=0.6-1.2mm

PBT Flame-retardant Material,High quality for your new 2G11 installation or retrofit project.

G24Q GX24Q Base (base depth: 15mm/ 0.59 inches) for G24Q-1 G24Q-2 G24Q-3 GX24q-1, GX24q-2 or GX24q-3 bases;

180d horizontal view, side light, 360d view angle,full size of light; Not dimmable; Working voltage: AC 85-300V 50-60hz Aluminum Extrusion+Milky PC Cover

Replace Compact Fluorescent Lamps/CFL widely used in Recessed/Surface-mounted Down lights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches.

All voltage workable: 100-250V AC, work for Incandescent, CFL, LED.

PBT Housing Copper contact material

Physically change the contact,DON'T Change Voltage nor Current.