Automotive From dynofit on Amazon

Fitment: Vehicles with wheel lug nuts requiring a 14x1.5 thread(6 lugs) and take a conical 60 degree seat, recommend for aftermarket wheels/rims or wheel spacer installation, compatiable with Chevrolet/Chevy Silverado 1500 tahoe Ford Expedition F-150 Wrangler JK GMC Savana 1500 and more, please make sure the seat type of your original lug nuts firstly before placing your Order.

Specification: Thread pitch M14X1.5, 60 Degree cone/conical seat, Overall tall 0.83" (21mm), Width 0.87"(22mm), 19mm(3/4") hex, 24 packs((handwrench recommended, don't use the impact tool)

Fitment: Compatible with Chevrolet- Camaro 82-03 ;Corvette 84-13;El Camino 82-87; S10 82-04; S10 Blazer 82-04; Cadillac-Eldorado 79-85; Seville 76-80 ;XLR 03-09;Pontiac -Firebird 82-02 ;GTO 64-87;Phoenix 80-85; GMC-S15 82-91; Jimmy 90-05; Sonoma 90-04; Buick-Riviera 79-85

Parameter: Bolts Pattern 5x4.75''(120.65) to 5x4.5" (5x114.3) | Hub Bore: 74.1mm | Thickness: 1"(25.4mm) | Thread Pitch M12x1.5 | The Spacers CHANGES BOLT PATTERN, VEHICLE Bolt Pattern Must Be 5x120.65 WHEEL Bolt Pattern Must Be 5x4.5/5x114.3mm ONLY WORKS with 5x4.5 WHEELS!! NOT Fit 5x4.75 WHEELS

Fitment: Vehicles with wheel lug nuts requiring a 9/16-18 thread(8 lugs) and take a conical 60 degree seat, recommend for aftermarket wheels/rims or wheel spacer installation, compatiable with Dodge ram 1500/2500/3500, Dakota, Durango, Hummer H1, Suburban 2500 and more, please make sure the seat type of your original lug nuts firstly before placing your Order.

Specification: Thread pitch 9/16-18, 60 Degree cone/conical seat, Overall tall 0.83" (21mm), Width 0.87"(22mm), 19mm(3/4") hex, 32 packs((handwrench recommended, don't use the impact tool)

Fitment: This socket set is typically used for one-piece 19mm hex nuts (typically 4.4" long). Suitable for 14x1.5, 14x2.0, 9/16-18, 1/2-20, 12x1.25 thread pitch. Not fit other 2-pieces seperated lug nuts.

Specification: ET Length 5”(125mm), Hex 19mm, End hex 13mm. Recommend hand tools to tight them, not powerful impact or it has danger to break the side or the teeth! Many kinds of spiked lug nuts in our store, search"dynofit spike lug nuts" or visit our storefront.

Fitment:1988-2019 F-250, 1988-1997 1999-2004 F350, 1994-2010 Ram 2500 3500, 2011-2019 Ram 2500 3500, 2002-2006 Avalanche 2500, 1992-1999 C2500 K2500 Suburban, 1988-2004 C3500, 1996-2019 Express 3500, 1988-2000 K3500, 2001-2006 Silverado 1500 HD, 1999-2019 Silverado 2500/2500HD, 2001-2010 Silverado 3500, 2000-2013 Suburban 2500, 2007-2019 Savana 2500, 1996-2019 Savana 3500, 1999-2019 Sierra 2500HD 3500HD, 1992-2006 Suburban 2500

Multi-bolts pattern(pcd)8 x 165.1(8 x 6.5), 8 x 170, 8 x 180, universal wheels spacer | hub bore:127mm(ID) works from 100-127mm center hole, 205mm(OD) |Thickness: 12mm(about 1/2"), comes 4pcs and totally around 24mm wider front and rear

This Dynofit U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks, Heat Treated C Clamp Puller is made of high quality material which can excellent press rusted parts effortlessly and it’s not easy to bent.

This Ball Joint Press Kits has a wide range of applications, it can not only be used to remove ball joints, but also U-joints and brake anchor pins, the operation is easy which won’t take a long time.