Toys & Games From DEVMO on Amazon

The LiPo Battery USB Charger Cable has indicator, IC protection circuit

Input: DC 5V, Output current: 1000mA

Wide Application: The balanced charging plate is suitable for most chargers( IMAX B8, UN A6, etc.), providing balance charge of 6 batteries, avoiding replacing the battery repeatedly.

Self-protection Function: Coming with short circuit protection function (with 40A fuse), it can avoid overcharge single battery, thus improving the balance efficiency, and the later stages of balancing the charging cycle are greatly shortened.

★Metal gear and double ball bearing.

★High speed, stable and shock proof

SUPER BRIGHT LED - Indicates if switch is on/off.

EASY CHARGING JACK on Switch Face - Don't need to un-plug battery to charge!

♥【with Step-down Module】It comes with step-down module the voltage changes to 5V automatically if the voltage exceeds the range of 3-6V.

♥【Waterproof】It is waterproof and it also works well in water.

Charge for 2s,3s,4s,5s,6s Lipo battery.Compatible with Mega Power 860 and 960 charger

JST-XH Connector is compatible with Tra-xxas, Ve-nom, Ra-cers Edge, Thunder Power,and many more batteries.

Brand New and All parts are tested and quality controlled prior to shipment.

Replacement Power Supply Compatible with the Atari 2600.

3 Amp Continuous / 5 Amp Burst

Input: 6.0-25.2v / 2-6S Lipo

【Wide Compatibility】The RC engine pull is suitable for HSP 1/8 1/10 scale truck and buggy of 18 & 21 engines. suitable for red-cat Exceed RC hpi model cars.

【3 Hole Support】There are 3 screw holes and each screw hole is 27-28mm approximately between each spacing.

6V-550 20000RPM High drive motor gearbox is widely used to replace and upgrade power or ride-on electric car( for six plum )

Voltage: DC 6V; Speed: 20000RPM ;Shaft Hole Diameter: 12mm (0.47"); Length: 185mm(7.28") Max Width: 92mm(3.62"); Motor Diameter: 35mm(1.38")

If do not know the replacement part number.Please measure the hole centers,this ad is 32mm,not the 27mm.Designed for .28 nitro engines only.

Compatible with Engine 12mm one way bearing(NOT Include)

Replacement of Parts# ECX232000

2pcs #45 steel CVD drive shaft set

For sale is high quality Aluminum Alloy Heatsink with 5V Cooling Fan in Blue Color.

This heatsink fit for 540 and 3650 size motor, it will come with a 5V cooling fan, to protect your motor.

12V 550 40000RPM Drive Engine for Kids Ride On Car

550 12V drive engine is made of high strength plastic board combined with high quality motor

★17mm HEX Nuts Installation Tools Sleeve for HSP RC 1/8 Buggy Car Tires Tyre Wheel Rim.

★RC 1/8, RC 1/10 HSP Car Tires Upgrade Parts Accessories.

Package includes 4PCS JST Y Cable.These are 1 Male to 2 Female Y Harness,1 Male to 3 Female Y Harness,1 Female to 2 Female Y Harness,1 Female to 3 Female Y Harness.They are compatible with Tra-xxxas car,also compatible with HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car.

The Male to Female Y Harness(Dual Fan Wiring Harness)can allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch.

Please refer to your instruction manual and make sure it's compatible.

Compatible with SHOCK-WAVE, TSU-NAMI, VOL-CANO S-T-X, TO-RNADO S30, VOL-CANO S30, AFTER-SHOCK 21, HURRI-CANE XL, AFTER-SHOCK 3.0, AFTER-SHOCK 3.5, BACK-DRAFT 3.5, CAL-DERA 3.0, EARTHQUAKE 3.0, EARTH-QUAKE 3.5, HURRI-CANE XP, LANDSLIDE 21, LAND-SLIDE LT, MAEL-STROM LT, MON-SOON XP, SAND-STORM 21, SAND-STORM LT, TWIS-TER LT, TY-PHOON XP, REA-CTOR RS 3.3, VOL-CANO MX, VOL-CANO SV, VOL-CANO T2, VOR-TEX SS, TOR-NADO BB and more... Medium for club racing and sport use.

★17mm HEX Nuts Installation Tools Sleeve for HSP RC 1/8 Buggy Car Tires Tyre Wheel Rim.

★RC 1/8, RC 1/10 HSP Car Tires Upgrade Parts Accessories.

Pack of 4,easy to install. Compatible with Tra-xxas HSP Redcat Tamiya Axial SCX10 D90 HPI 1/10 RC Car.

Made of strong aluminum alloy,lightweight and durable.

LED lights are all on (default mode)

For the front LED light, white LED is flashing quickly, blue LED is always on. For the back LED light, white LED is always on, yellow and red lights are flashing quickly