Deadwood Crafted Tools Buying Guide & Brand Review (April 2024 Updated)

Deadwood Crafted Tools 115V 15A Maintained Foot Switch Extension Cord Outlet Switch - Step Foot Pedal Switch

Features

[Quick On-Off]: Use the DCT Foot Pedal Control Switch to activate your woodworking power tool, printing and sewing machine, tattoo gun, textile and crafting tool; Not a speed controller (not momentary deadman)

[Hands-Free]: Improve safety and control by using this electrical foot switch cord step button; Provides continuous power (maintained action) until turned off with the tap of your foot

Show More

DCT Abrasive Paper 5pc Sand Paper Variety Pack with Dispenser – 150, 240, 320, 400, 600 Grit Aluminum Oxide Sandpaper

Features

SANDPAPER ASSORTMENT: Use the DCT | 150-600 Grit Assorted Sandpaper with Dispenser when narrow 1-inch (2.5cm) strips of abrasive sanding paper are needed; Back of each roll is cloth-backed and marked with grit number approximately every 9 inches (22.9cm)

FINISH YOUR PROJECT: Ideal for glass sculptures, fine metal jewelry, sanding on lathes, or any detail woodworking projects such as turning spindles, pens, bowls, and moldings; For dry (not wet); Fabric-backed for longer life than paper-backed or sticky (adhesive) PSA sandpaper

Show More

DCT Bench Holdfast Woodworking Tools – 8in Bench Holdfast Clamps Woodworking Bench Holddown Clamps, 2 Pack

Features

WOODWORKING HOLDFAST SET: Quickly clamp down your woodworking projects with the DCT | 8 Inch Woodworking Bench Accessories Workbench Holdfast 2 Pack Set; For hundreds of years, bench hold fast hooks have been used to secure wood projects while cutting, carving, and sanding because of their versatility and ease of use; Skip the complicated leg vise hardware and standard clamps that are difficult to adjust and use these simple workbench hold downs

IDEAL FOR VARIOUS WOODWORKING JOBS: Use these work bench clamps for woodworking projects; Hold downs for woodworking provides a strong, sturdy hold to allow hands-free carving, routing, sanding, planing, sawing, drilling, and finishing; Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece

Show More

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

Features

PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates; Fits router with template guide adapter

COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches); Fits 1/4-inch and thinner template material; Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID; 3/8-inch OD 9/32-inch ID; 7/16-inch OD 11/32-inch ID; 1/2-inch OD 13/32-inch ID; 5/8-inch OD 17/32-inch ID; 3/4-inch OD 21/32-inch ID; 51/64-inch OD 5/8-inch ID; 1-inch OD 7/8-inch ID

Show More

DCT 1/4 Inch Drive Drill Press Sanding Drum Kit - Rubber Sanding Drums (0.5-1.5 Inch) and Spindle Sander Sleeves, 20pc

Features

[20 Piece Drill Press Kit]: Create holes, smooth out rough edges and cuts, polish, or contour irregular shapes into your projects with the DCT Sanding Drum and Sleeves 20 Piece Kit; Package includes rubber barrel sanding drums (1/2”, 3/4”, 1”, 1-1/2”), abrasive sleeves (fine 120 grit, coarse 80 grit), and a plastic blow-molded carrying case

[Fits Your Tools]: Drill sanding attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools; Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachment

Show More

DCT Wood Glue Spreading Woodworking Kit – 8 oz Ounce Bottle, Roller Applicator, Dowel Hole Nozzle, Biscuit Slot Tip

Features

EVENLY APPLY GLUE: Use the DCT Wood Glue Spreading Woodworking Kit – 8 oz ounce Bottle, Roller Applicator, Dowel Hole Nozzle, Biscuit Slot Tip to apply even coats of glue on any surface; It is a lifesaver for extensive glue ups such as building cabinets and more; This glue bottle applicator set will cover more surface area which means better glue joints on your application

RELIABLE ROLLER: Non-stick glue roller applicator has an approximate 2.5-inch (6.4cm) width and provides quick, even, and mess-free coating of glue

Show More

DCT Wood Clamps, 1.5in Pinch Clamp Pinch Dog 10-Piece Set for Woodworking Wood Glue Up Gluing Table Panel Pinch Dogs

Features

PINCH DOGS FOR WOOD WORKING: Use the DCT Pinch Dogs Woodworking Clamp Set to tightly join glue up panels; 1.5-inch (3.8cm) sizing permanently laser-etched on both sides of pinch clamps for easy identification

IDEAL FOR GLUE-UPS: For gluing up woodworking projects that are hard to otherwise clamp; These small clamps work on large biscuit panels and anything with an odd shape, angle, or curve such as round and oval table and countertops; Use for assembly clamping, column assembly, and pulling together a joint

Show More

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

Features

ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools; Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories; Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup

PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment); 10-foot (3m) long vacuum hose for ample room to reach your equipment; Small diameter for flexibility and maneuverability; Ribbing offers secure handling grip

Show More

DCT Mesh Abrasive Paper 5-Piece Sand Paper Variety Pack with Dispenser – 180, 240, 320, 400, 600 Grit Mesh Sandpaper

Features

SANDPAPER ASSORTMENT: Use the DCT 180-600 Grit Mesh Assorted Sandpaper with Dispenser when narrow 1-inch (2.5cm) strips of mesh abrasive sanding paper are needed; Mesh construction allows wood particles to pass through, prevents clogging, and keeps dust from affecting your final finish; Use with hook and loop passive and power sander machines or fold up and use by hand without extreme heat buildup

FINISH YOUR PROJECT: Flexible mesh conforms to rounded shapes of spindles, vases, and bowls and is ideal for glass sculptures, fine metal jewelry, sanding on lathes, or any detail woodworking projects such as turning spindles, pens, bowls, and moldings; Material works on wood, composites, metal, plastics, acrylics, paints, primers, and top coats for automotive aftermarket industries, furniture, energy companies, solid surface fabrication, marine work, wood flooring, glass and marble installation

Show More

DCT 5 Star Knobs 5-Pack 1/4in-20 Internal Threaded Knob Clamping Knob Jig Knobs – T Knob Plastic Knobs, Threaded Knobs

Features

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs 5-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch 20 internal thread is required

PERFECT SIZE: 2-inch diameter and 1-inch height (5.1cm x 2.5cm); T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch)

Show More

DCT Wood Round Corner Chisel Squaring Tool for Squaring Hinge Recess, Square Mortise – Mortising, Woodworking, Framing

Features

SQUARE UP INSIDE CORNERS: This corner chisel can be used for easily and accurately carving the inside round corner cut outs of your woodworking router projects

VARIOUS APPLICATIONS: Designed to create square corners in router hinge recesses, door lock recesses, hinged mortises, wood flooring stock, picture frames, and other applications where precision corners are desired

Show More

DCT Universal Ratcheting Hardwood Plank Jack - Laminate Vinyl Flooring Tools Installation Wood Floor Jack Install Tool

Features

[Install Flooring without Damage]: The Deadwood Crafted Tools Laminate Floor Jack Laminate Flooring Installation Kit brings crooked, warped, or bowed flooring strips into place for fixing and holds them in place during installation; Flooring jack laminate jack is not for lifting

[For Any Floor Thickness]: Laminate flooring jack features universal adjustable length from 14 to 16.7 inches (35.5-42.5cm); 4.3 x 2-inch (11 x 5cm) plate; 13 x 0.9 x 0.6-inch (33 x 2.4 x 1.4cm) rack; 1.1 x 4.25 x 1.9-inch (2.9 x 10.8 x 4.8cm) rack plate; 3.9 x 8 x 0.2-inch (9.8 x 20.3 x 0.5cm) lifting plate

Show More

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router Silver

Features

INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area

ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp

Show More

DCT Spring Miter Clamp Assortment & Pliers 25-Piece Tool Kit – Corner Molding, Trim, Frame Woodworking Metal Clamps Set

Features

EASILY CLAMP MITERED CORNERS: The DCT Spring Miter Clamp Assortment & Pliers 25-Piece Tool Kit – Corner Molding, Trim, Frame Woodworking Metal Clamps Set keeps mitered pieces firmly aligned for gluing or nailing; This set is great for moldings, trim, frames, and even for clamping 90-degree miter photo frames before mounting; Simply choose the appropriate size spring clamp and use the spreader to open and position the clamp (clamps corners only)

CLOSE MITERED JOINTS: Clamps exert force to close a mitered joint on a picture frame or door trim work; The spring wires are strong but easily spread with included tool; Wire tips are cut diagonally for a sharp leading edge to penetrate and stay in place even in hardwood; 4 of each of the following spring clamps are included – 1/2 to 3/4in (13-20mm), 11/16 to 1in (17-25mm), 7/8 to 1-3/16in (22-30mm), 1 to 1-3/8in (25-35mm), 1-3/4 to 2-3/16in (45-57mm), 2-1/2 to 3in (65-75mm)

Show More