Industrial & Scientific From Cregrant3D on Amazon

2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend.

2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency.

2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable. 【Note】If have any using problem. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours.

Easy firmware installation：Simply download the BLTouch firmware from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.

Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.NOTE: The springs are around 25mm long, which is longer than ender 3 v2 and ender 3 printer springs. You may use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.

This bundle includes Capricorn PTFE Teflon Tubing which is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the ""wiggle room,"" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time .

Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.

Firmware Marlin comes pre-installed, pre-configured for the Ender 3 Pro, makes it totally plug & play.

This silent mainboard preinstalls the Ender-3 Pro firmware.

[Adhesion & Removal]No Edge Curling,molds could stick on bed firmly without glue,avoiding the issue of print edges curling.when the print platform cools down,very easy to take off the models.

[Upgraded Aluminum Red Hand Twist Leveling Nut] The leveling nut made of high quality aluminum, stander than the original plastic nut.

[High Quality Silicone Leveling Column& Clips] New improved leveling tool for 3D printer hot bed / platform bottom connection. This heat pressure resistant silicone leveling column makes it easier to level your 3D printer.4 clips make it more stable for the 7mm thickess bed platform.

[Upgraded Aluminum Red Hand Twist Leveling Nut] high quality aluminum, stander than the original plastic nut.

[High Quality Silicone Leveling Column] New improved leveling tool for 3D printer hot bed / platform bottom connection. This heat pressure resistant silicone leveling column makes it easier to level your 3D printer.

[Easy to use] The silicone buffers are simply installed in place of the original spring.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

Stable Structure: Equipped with a selection of Iron pipes to support, the structure of this 3d printer enclosure is stable. Soundproof and dustproof, giving you a more comfortable printing experience.

Easy to Use: This 3d printer enclosure is foldable, easy to store and carry, saving your space. With pockets to hold the necessary tools. Access the printer by unzipping the front of the enclosure.

Firmware: Simply download the touch screen Kit firmware from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.

Easy to Use: Touch the interface then complete the instruction.

Installation Instruction: Connect the screen wires, use the hexagon wrench to lock the screw on the right of the screen with the printer base.

[Rugged ABS Storage Box] Made by high density ABS with foam inside. This box is waterproof, high and low temperature resistant, shock-proof, and chemical resistant.

[Easy to Use and Carry] All tools are packed in a box(14.2*10.2*3.2") and each tool fits snugly into its respective place to prevent moving around and scraping.

[Service and Support] If you have any questions while using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.

Silicone Leveling Column Mounts Helps to keep the Heatbed extremely stable.

Silicone Sock Helps to keep the hotend temperature extremely stable.

High temperature resistance: 280℃.

Premium Touch Control, Supports 11+ Languages

Built-in Holder Model Library from Clouds

Power Loss Resume and Filament Run-out Detection