Electronics From Comidox on Amazon

Support CAN V2.0B technical specification, communication rate 1Mb/S.

0~8 bytes long data field, standard frame, extended frame and remote frame.

The MCP4725 is a single-channel 12-bit buffered voltage output DAC with non-volatile memory (EEPROM) that allows you to store configuration register bits (2 bits) and DAC input data (12 bits) to non-volatile EEPROM (14-bit) In memory. The DAC can be configured for normal mode or power-saving shutdown mode by setting the configuration register bits.

The DAC allows you to send analog signals, such as sine waves, from a digital source such as the I2C interface on an Arduino microcontroller. Digital to analog converters are ideal for sound generation, musical instruments and many other creative projects.

DC-DC boost converter module, operating frequency 150KHZ, typical conversion efficiency of 85%.

Pin 2.54MM pitch.

Brand new.

Material: ABS.

It is widely used in general-purpose connecting devices in electronics, electrical appliances and meters, mainly for current or signal transmission. Usually used in conjunction with the pin headers to form a board-to-board connection.

Gold-plated/nickel-plated brass, resistant to decay and conductive.

Using the very mature charging chip TP4056, the peripheral circuit is simple, the protection performance is good, and the charging accuracy is high.

This module is fully mechanically automated and fully fabricated. Each module is tested before shipment and has high reliability.

input voltage: DC 3 V to 6 V Input current: 2 A - 5 A

High pressure type: the type of pulse current Output voltage: 400000 v(Please pay attention to safety)

Output voltage: DC 5V

Output Current:20~200mA

This magnetic cartridge stylus is designed for Turntable Record Player with excellent clarity and detailed performance.

Good quality, each cartridge is carefully assembled and can withstand severe tests.

The module has 2 outputs: AO, analog output, real-time output microphone voltage signal; DO, when the sound intensity reaches a certain threshold, it outputs high and low level signals, [threshold-sensitivity can be adjusted by potentiometer]

There are 3mm mounting screw holes, which are powered by a 5v DC power supply.

The sensor module has strong adaptability to ambient light, and has a pair of infrared emitting and receiving tubes. The transmitting tube emits infrared rays of a certain frequency. When the detecting direction encounters an obstacle (reflecting surface), the infrared rays are reflected and received by the receiving tube. After processing by the comparator circuit, the green indicator light will be on and the signal output interface will output a digital signal (a low level signal).

The detection distance can be adjusted by the potentiometer knob, the potentiometer can be adjusted clockwise, and the detection distance is increased; the potentiometer is adjusted counterclockwise to reduce the detection distance. The effective distance range is 2~30cm, the detection angle is 35°, and the working voltage is 3.3V-5V.

High-quality environmentally friendly materials, low-temperature oxidation coloring treatment, surface highlight grid, knob top round sun pattern, with "triangle" Peugeot point.

Widely used in multimedia audio, power amplifier, photographic equipment, medical products, mechanical equipment, etc.

Mouse pad with gel wrist support, helps keep your wrist in a proper position and reduce pressure and pinching of the wrist, make your mouse use more precise and comfortable.

No-slip rubber undersurface firmly grips the desktop.