Industrial & Scientific From Cnloyua on Amazon

★ Reuse: The solid clamp design is more solid, the clamp is not easy to fall off and break after repeated use, and the use is safer.

★ Protection: It can not only protect the cable well, extend the life of the cable, but also make the whole 3D printer more tidy.

★ Has many uses: Wide range of uses. This nylon cable chain is very suitable for 3D printers, CNC machine tools, robotic arms, stone processing machinery, lifting and conveying equipment.

【Enhanced Security】 The fingerprint lock body is made of aluminum alloy with a stainless steel lock lever, which is durable. It is tamper proof and rust proof, which can ensure your family won't get violated by thieves.

【Small and portable】 Small and easy to carry, you can put it in your purse or pocket at any time and take it out for use on the go.

【Widely used】 Suitable for homes, offices, factories, student dormitories, hospital ward toolboxes, backpacks, suitcases, filing cabinets, electric bicycles, food delivery boxes and other lockers in public places.

【Wide range of applications】replacement for many 3D printers such as Anycubic i3 Mega / Anycubic i3 Mega / Ender 3 / Ender 3 v2 /Ender 5 / Ender 5 pro / CR 10 / Anet A8 / Lulzbot Taz / CR10 / Tevo etc.

【Energy-saving and time-saving】The insulating layer made of pure aluminum helps the printer to shorten the heating time and to keep it constant at the set temperature. Due to the small temperature fluctuation, the adhesion of the ABS print is better. Especially suitable for use in winter, the pure aluminum insulation layer of foam sponge can effectively isolate the temperature difference, allowing your 3d printer to continue to work effectively !

【Shock Absorption and Sound Absorption】 The foam material used in the thermal insulation cushion can better reduce noise, protect your hearing and improve your experience.

【Easy to Install】 In order for it to work properly, you need to assemble the nut / spring / driven nut first and then wrap it on the screw. There is a gate between the nut and the nut and you need to align the gate for it to work.

【Worry Free】 If you use traditional nuts for 3D printing, you will need to clean and relubricate the threads frequently. Since POM is self-lubricating, there is no need to add any additional lubricant when using POM anti-backlash nuts.

【Wide compatibility】 This product is a replacement for most 3D printers, such as: CR10 / CR-10S / CR 10 Pro / CR 10 Pro Max / CR 10 v2 / CR 10 v3 / Ender 3S / Ender3 Pro / i3 Mega s / Artillery Genius / Artillery X1 / Sidewinder X1.

【Protect your 3D printer】: The M4 nut is made of high quality plastic and will not scratch the printer's hot bed like a metal nut when in use. Using this product can also protect your ears and there is almost no noise during use! It doesn't make a harsh sound like a metal nut.

【Applicable Models】: This product is compatible with most of the 3D printer models. Replacement for Ender 3 / Ender 3 Pro / Ender 3 X / Ender 3 V2 / Ender 5 / Ender 5 Plus / Ender 5 Pro / CR-10 / CR-10 V2 / CR-10 Max / CR 10 / CR- 10 Mini / CR -10S / CR 10S Pro / CR-10 Plus / CR-X / CR 20.

【Comprehensive Support】 This heated bed leveling kit contains 4 M4 leveling nuts, 4 screws, 4 compression springs, 4 18mm silicone leveling columns and 1 16mm silicone leveling column.

【Easy to remove】 Once the glass sheet cools to room temperature, the adhesion is reduced, it is easy to remove models by hand or just with a scraper for large models, the glass sheet with microporous coating has strong adhesion when printing. Easily remove models from the squeegee by hand or with a little help.

【Note】If you find that the product is "deformed" after use, it may be caused by unevenness in the middle of the printer's hot bed. It is recommended that you: 1. When using the glass platform, use the hot bed leveling kit, which can help you find the level of the hot bed. 2. Replace the hot bed.

【Compatibility】 Designed to replace the Ender 3 / Ender 3 pro 3D printer, it is also compatible with most hot bed 3D printers. For Anycubic i3 Mega / Ender 5 / Ender 5 Pro / Anet A8 / Lulzbot Taz CR10.

【Good performance】 Since it is made of silica gel material, the silica gel sleeve can play a good role in keeping heat and will not shrink the heating block at high temperature.

【Easy to install】 Just a light set, the silicone sleeve can be firmly put on the heating block and not easy to fall off.

【Wide compatibility】 This product can be used as a replacement for 3D printers, such as: CR10 / CR-10S / CR 10 Pro / CR 10 Pro Max / CR 10 v2 / CR 10 v3 / Ender 3 / Ender 3S / Ender3 Pro / Ender 5 / Ender 5 PLUS / Anucubic i3 Mega s / Artillery Genius / Artillery X1 / Sidewinder X1.

【Widely used】Suitable for 3D printers, stepper motors, engraving machines, machine tools and other equipment.

【Precise and Accurate】The 3D printer lead screw is precisely processed, which can help you improve printing accuracy.

【Professional Service】If you have any questions after receiving the product or during use, please contact us in time, we will provide you with professional answers.