Top 15 CMTOOL Products On Amazon (Verified to buy)
Top 1
Test Light Automotive Power Circuit Probe Tester with 4M Test Lead 6-24V DC Led Light Tester Fuse Tester 6V 12V 24V Wire Circuit Tester Auto 12 Volt Electrical System Tools Car Truck Circuit Test Pen
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
1.【Portable Multifunctional Electrical Tester】The 4-meter extension cord is helpful for mobile maintenance work and is suitable for diagnostics of all 6V to 24V automotive electrical systems. The tester is made of ABS material, which is moisture-proof, high-temperature resistant, impact-resistant and has a longer service life. The tester also has an overload protection device, When the current exceeds 7A, the circuit breaker inside the device will automatically trip and give out a buzzer prompt.
2.【Polarity Test and Continuity Test】The tester is made of insulating material and high-quality stainless steel, which can help you quickly identify the positive and negative polarity of the vehicle cable and plug. When the tester touches the positive pole, the LED should be red; when it touches the negative pole, the LED should be GREEN. The electric circuit tester is also used to check the continuity of switches, relays, diodes, fuses, and circuits.
3.【Component Activation and Testing】For professionals or car enthusiasts, this continuity tester is a great tool. The automotive short circuit tester can activate the components in/out of the vehicle's electrical system. The LED indicator and buzzer prompt can easily test and check whether the components are defective, or whether the rated current of the component is higher than the rated current of the tester.
4.【Automotive Circuit Tester for Grounding Test】The design of the circuit breaker finder is perfectly designed and feels comfortable. It is equipped with a 4M extended detection line, covering the front to the rear of the vehicle and easily detecting the entire vehicle circuit system. The automotive circuit tester kit has a grounding prompt device. If the LED indicator turns green and the buzzer sounds, it means that the grounding is good. If it is not, the LED remains red and there is no beep.
5.【Tracking and Locating Short Circuits】The electrical tester uses advanced high-sensitivity probes to provide you with fast and accurate detection. Using the continuity tester can save a lot of time to troubleshoot the car wiring circuit, to quickly and accurately find the faulty wire and its fault point.
6.【24-Hour Service and 1-Year Warranty】We provide this circuit probe tester with 24 hours friendly customer service and 12 months free warranty to ensure your shopping experience. We always put our customers first, if you have any questions about this probe tester, please feel free to contact us!
Show More
Show Less
Top 2
CMTOOL Spark Plug Socket 14mm Spark Plug Socket Set Magnetic Spark Plug Socket 3/8 Inch Drive 12 Point Thin Wall Swivel 14 mm Spark Plugs Socket Spark Plug Removal Tool Compatible with BMW and More
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【SPECIFICATIONS】 - Ours 3/8 inch drive 14mm thin wall magnetic swivel spark plug socket is 12 point design, so that the walls are only 1mm thick which is thinner than the standard 6 point spark plug socket.
【COMPATIBLE WITH BMW AND MORE】 - 12 point 14mm thin wall spark plug socket is compatible with BMW 1 series (E81 / E87-N43B) & 3 series (E90-N43B) & 5 series (E60-N43B); compatible with RENAULT Modus, compatible with Twingo, compatible with Clio, compatible with Kangoo with 1.2 16V engine; compatible with PEUGEOT 207, 307, compatible with CITROEN C4 with 1.4 and 1.6L 16V engine; compatible with C5 with 2.0 HPi engine; compatible with MERCEDES-BENZ, M156, M276 engine; compatible with Nissan Micra, compatible with Note, compatible with MINI1.2- 14L-cyl, ect.
【MAGNETIC & 360° SWIVEL SPARK PLUG SOCKET】 - 14mm thin wall spark plug socket has a built-in magnet, it can fix and protect the spark plug well, thereby minimizing damage. In addition, our 14mm spark plug socket can rotate smoothly in 360°, and has great flexibility in narrow areas.
【MADE OF CHROME VANADIUM STEEL】 - 14mm swivel spark plug socket thin wall is made of quenched and heat-treated chromium-vanadium alloy steel, which has a good effect of preventing rust and corrosion, and can maximize the service life of the equipment.
【14mm Spark Plug Socket Magnetic With Unique Bump Design】The surface of the 12 point 14mm thin wall spark plug socket has a unique concave-convex design, which can enhance the friction of the grip and make it easier for you to remove the spark plug.
【24-Hour Service and 1-Year Warranty】We provide this 14mm Spark Plug Socket with 24 hours friendly customer service and 12 months free warranty to ensure your shopping experience. We always put our customers first, if you have any questions about this Thin Wall Spark Plug Socket, please feel free to contact us!
Show More
Show Less
Spark Plug Tester Dual Holes Engine Ignition Coil Tester 0-6000rpm Working Frequency Spark Tester Automotive Spark Plugs Tester Tool for 12V Gasoline Vehicles Motorcycle Car Spark Plug Test Kit
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
1.【Simultaneous Dual-hole Testing】The spark plug tester has two test holes, which can test the spark plug at the same time. By comparing the intensity of the test spark, you can make an accurate judgment on the quality of the spark plug, saving time and efficiency, and ensuring the spark plug can work properly.
2.【Working Frequency from 0 to 6000rpm】The working principle of the car spark plug tester is by simulating the engine work, the working frequency of the tester can be adjusted according to the need, and the range can reach 0 to 6000rpm, the higher the set frequency, the stronger the spark intensity.
3.【Plug-and-Play & High Voltage Indicator】Put the spark plug in the test hole, close the protective cover, connect the power supply and adjust the working frequency. The automotive spark plug tester is equipped with a high pressure indicator light, you can easily observe the spark plug test status.
4.【ABS Material & Protective Cover Design】The spark tester is made of ABS material, which is moisture-proof, high-temperature resistant, impact resistant and has a longer service life. Cover the protective cover before use, the test process can ensure the operator's safety, but also through the transparent protective cover to visually observe the test results.
5. 【Important Note】The spark plug tester tool is compatible with all crankshaft engine and motorcycle spark plug testing on the market. Suitable for testing spark plugs of automobile engines, not for testing the short plugs of lawn mowers, chainsaws or most small engines.
6. 【24-Hour Service & 2-Year Warranty】We offer 24 hours friendly customer service and 24 months free warranty for this spark plug tester to ensure your shopping experience. If you have any questions about this spark plug tester kit, please feel free to contact us!
Show More
Show Less
Manometer ±20.68 KPa Digital Monometer Gas Pressure Tester 12 Selectable Units Dual Port Differential Pressure Gauge Digital HVAC Manometer Gauge with Backlight Professional Air Pressure Meter Tool
CMTOOL
8.35 x 4.92 x 2.13 Inches
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【Portable Manometer with ABS Material and LCD Display】The handheld digital pressure gauge is made of ABS material, and the excellent performance of high-temperature resistance and impact resistance makes the air pressure meter have a long service life. 4.45CM×4.95CM display, support LCD backlight, convenient lighting operation, display data clearer and easier to read.
【Multifunctional Pressure Gauge with Accurate Readings】The digital pressure gauge adopts a high-quality pressure sensor, which has the characteristics of high precision and wide range. High-precision ADC and low-power MCU. Maximum/minimum mode and DIF mode. Professional air pressure gauges are specially used for gas measurement and calibration, gas pressure system troubleshooting, laboratory testing, maintenance and installation of blowers, clean rooms, boilers and other gas appliances.
【Differential Pressure Gauge with 12 Selectable Units】The length of the two hoses in the gas pressure gauge set is 25cm; The thread size of the barb metal connector is 1/8 inch; 12 optional units (mmHg, inHg, ftH₂O, cmH₂O, inH₂O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin²)
【Manometer for Measuring Positive and Negative Pressure】There are two ports on the top of the differential pressure meter, one for testing positive pressure and the other for testing negative pressure. You can select any port to test the pressure difference (P1-P2) between the two areas. Using the single pipe connector of the air pressure meter, you can quickly measure the current pressure value (relative to the current atmospheric pressure).
【Digital Manometer with Data Recording & Holding Function】Gas manometer data storage: 100 groups; the user-friendly design of the manometer gas pressure tester recording test data function is convenient for users to view after testing; automatic shutdown: no operation after about 15 minutes; low battery reminder: ≤6.8V 【Note】Battery: 1* 6F22, 9V, 250mAh (not included in the package)
【Manometer Gas Pressure Tester with Data Zero Function】The "return to zero" function of the manometer gauge data is easy to operate so that your readings are accurate. If you are hand holding the device, it tends to drift from zero readings, so it is best to place the manometer on a stable surface, zero it out, leave it there to take the accurate reading.
Show More
Show Less
Top 5
CMTOOL Oil Drain Plug Removal Tool, Strong Magnetic Oil Plug Remover, Anti Scald Sump Plug Removal Tool (13 Inches), Magnetic Strong Oil Drain Plug Tool Remover Wrench Against Scald
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【Oil Plug Removal Tool Suitable for Most Oil Drainers】The oil plug removal tool is a highly practical professional tool, compatible with most types of automobile oil drainers. Simply use a wrench to loosen the plug, attach a strong magnet to the drain plug, and then turn the tool to remove the plug. (Only effective when the drain plug is loose enough that it can be turned with your fingers.)
【Magnetic Oil Drain Plug Removal Tool for Quick Removal】The shaft of the oil pan plug removal tool is flexible, and it can flexibly contact the remote oil drain plug, and the oil drain screw can be removed quickly and healthily. The edge of the magnet tip will grab the drain plug and unscrew it from the vehicle. The oil drain plug removal tool will not let your hands get hot oil.
【13 Inches Portable Oil Drain Plug Removal Tool】The oil drain plug removal tool is made of high-quality stainless steel material, which has excellent waterproof performance and durability. High-quality solid steel bars increase pressure resistance and are easy to operate. Due to its lightweight and small size, the oil drain plug removal tool works well in narrow places and is very convenient for us to store and carry.
【Non-slip and Comfortable to Hold Oil Plug Removal Tool】The handle of the oil drain plug removal tool is made of special rubber material, which has a good anti-slip effect. User-friendly ergonomic design, comfortable to hold. The oil pan plug removal tool is labor-saving and does not hurt your hands, even if you use it for a long time, you will not feel too tired.
【Oil Drain Plug Removal Tool with A Strong Magnet】The magnetic suction of the oil drain plug magnetic removal tool is strong, and the oil plug nut will not fall into the oil pan. The oil pan plug removal tool is easy to use and can enter places that are hard to reach my hands.
Show More
Show Less
CMTOOL Bearing Puller 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【Widely Used 3 Jaw Bearing Puller】This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable.
【Excellent Design】The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable.
【High-Quality Pilot Bearing Puller】 The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life.
【Strong 3 Jaw Bearing Puller】 The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm)
【Precautions】 The claws of the bearing puller have positive and negative installation methods. suitable all sleeve bearings with an inner diameter of 1/2 "-2". Note: Please keep balance when using it to avoid damage to the hook rod. If the bearing is rusty, it cannot be used (Stretching range: 50-95mm / 2.0-3.7 inches)
Show More
Show Less
Top 7
Refrigeration HVAC Digital Manifold Gauge Auto AC Gauges R134a R410a R12 R22 R1234YF Refrigerant Car AC Freon Recharge Kit Home Automotive 3 Way AC Diagnostic Manifold Gauge Set Vacuum Pump Operation
CMTOOL
MD-12
10.08 x 8.74 x 2.99 Inches
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【NOTE】The Single Gauge does not include the test clip required for temperature testing. (Need to purchase the same clip in the Digital Manifold Gauge Set separately). The test clip in the Digital Manifold Gauge Set is dedicated to this instrument, and other clips on the market are not compatible with the product.
【Durable and Multifunctional Digital Manifold Gauge】The HVAC gauge use high-strength engineering plastics and flexible non-slip silicone design, long-life valve switch, 1/4 inch standard interface design to ensure durability and versatility of the digital gauge.
【HVAC Gauge with Visual Window and Large-Size LCD Display】Directly observe the charging status of the refrigerant through the refrigeration gauge window, which makes the operation more convenient. The 7.5CM×4CM display screen of the digital HVAC gauge supports LCD backlight, and the data display is clear and easy to read.
【Refrigerant Gauge with the High-Precision Data Unit】The digital HVAC manifold gauge has a built-in 32-bit digital processing unit and a high-precision data acquisition unit, with high and stable data volume. The digital AC gauge has automatic multi-unit pressure conversion and automatic conversion of Celsius/Fahrenheit temperature, which can meet different needs.
【Digital Manifold Gauge with Built-In Refrigerant Database】The digital refrigerant gauge has a built-in database of 89 kinds of refrigerant pressure-evaporation temperature, which conforms to the American NIST standard. The a/c manifold gauge set also calculates the degree of subcooling and superheating, which facilitates direct reading of the running process data, and the test results are more accurate.
【Digital HVAC Manifold Gauge for Pressure Leak Test】The HVAC pressure gauge calculates the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking. Pressure leak measurement, leak time and speed record. Using a digital HVAC vacuum gauge, the operation is simple and the test results are more accurate.
Show More
Show Less
Top 8
Digital Manifold Gauge Set HVAC Dual-Channel Temp Sensor HVAC Tools for 89 Kind of Refrigerant Digital AC Gauges Vacuum Pressure&Temp Test Digital HVAC Gauges with Hoses Digital Refrigeration Gauge
CMTOOL
MD-12
13.98 x 12.71 x 4.61 Inches
6.64 Pounds
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter.
2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value.
3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure-evaporation temperature database, also calculate the subcooling superheat, to facilitate the direct reading of operating process data. Also, it tests the percentage of vacuum measurement.
4.【Durable and Multifunctional HVAC Manifold Gauge Set】The HVAC tools are designed with high-strength engineering plastics and flexible non-slip silicone. The whole HVAC pressure gauge is solid and comfortable to hold. The exquisite design of the foldable hook ensures that the digital ac gauge is in a safe position during the measurement of air conditioning tools & equipment. Long-life valve switch, 1/4 inch standard interface design to ensure the durability and versatility of the instrument.
5.【HVAC Manifold Gauge Set for Pressure Leak Test】The HVAC pressure gauge calculates the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking. Pressure leak measurement, leak time and speed record. Using a digital manifold gauge set can make your job easier.
6.【Refrigerant Gauges with Visual Window and LCD Display】The charging status of refrigerant can be directly observed through the refrigeration gauges window, which makes the operation more convenient. 7.5CM×4CM display screen, support LCD backlight, convenient lighting operation, the displayed data is clearer and easier to read.
7.【Note】The digital HVAC gauges will read random numbers when it is powered on. Correct steps: 1. Turn on, then close the two valves, press the "ZERO" key to clear the reading. 2. Then connect the three-color hoses, then open the valve, and use it normally. Please make sure that the refrigerant hose is properly connected. Poor connection may cause refrigerant leakage. The maximum working pressure of the standard hose is 600 PSI ( 4.13 Mpa, 41.3 bar). The ultimate pressure is 3000 PSI.
8.【How to Detect Whether the Temperature is Accurate】There is a simple method: take out the black wire of the temperature clamp, and then put the temperature clamp into boiling water. If the displayed temperature is 100 ℃ ± 3%, it is normal.
Show More
Show Less
Top 9
CMTOOL Metric Thread Chaser Set 15Pcs Thread Cleaning Tool Restorer Kit Thread File Tap and Die Set Metric and Standard M6x1.0 M8x1.25 M10x1.25 M10x1.50 M12x1.25 M12x1.50 M12x1.75 Thread Repair Tool
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【Widely Used Metric Thread Chaser Set】The thread repair tool includes 7 metric thread dies, 7 metric thread taps, 1 metric restorer file, and a plastic toolbox. The metric thread chaser set can easily help you repair damaged external and internal threads on nuts, bolts, and studs.
【Metric Thread Chaser Made of High-quality Materials】These threaded chasers are made of hardened high carbon steel and chrome vanadium steel, have a hexagonal head, and are designed to be used with standard metric sockets, adjustable wrenches, or combination wrenches. [7 metric thread die sizes] M6-1.00, M8-1.25, M10-1.25, M10-1.50, M12-1.25, M12-1.50 and M12-1.75.
【Easy-to-Operate Thread Repair Kit】The tap can be easily cross- or re-thread a hole. Very useful for removing old thread-lock compounds and generally cleaning rusty bolt threads for easier re-assembly. [7 metric thread tap sizes] M6-1.00, M8-1.25, M10-1.25, M10-1.50, M12-1.25, M12-1.50 and M12-1.75.
【Heat-Treated Metric Thread Repair File】The metric thread file has high hardness, and the surface is also treated with black oxidation to prevent rust. It also has a removable plastic cap to cover the cutting edges that are held in the hand. Prevents treading your fingers. [File 8 pitches] 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, and 3.00.
【Thread Chaser Set with Blow-molded Box】All thread repair tools are well organized in a blow-molded case, which will not be lost and easy to carry when stored in it after use.
【24-Hour Service & 2-Year Warranty】We offer 24 hours friendly customer service and 24 months free warranty for this thread repair tool to ensure your shopping experience. If you have any questions about this thread chaser kit, please feel free to contact us!
Show More
Show Less
Car Engine Piston Ring Compressor Kit, Piston Ring Compression Tool with Ring Pliers & 14 Piston Rings(62-145mm),Pliers Set for Trucks and Cars
CMTOOL
SM-HSHTOOL
10.6299 x 8.6614 x 1.9685 Inches
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【Piston Ring Pliers For Cylinder Installation】The tool set for compressing piston rings, used for cylinder installation. The fine tooth lock allows you to compress the belt in small increments, and the tool solution is suitable for almost all situations.
【Piston Rings For Fine-Tooth Locking】The piston diameter is 62mm-145mm in a wide range of work, which can almost be fastened and adapted to most pistons.Holds the rings securely until the Piston is Reinstalled.
【Piston ring size】 The size of the installed piston ring: 1:62-65mm, 2:75mm, 3:80mm, 4:85-86-87mm, 5:90-92-95mm, 6:100-102mm, 7:105 -105-108mm, 8:110mm, 9:113-114-115mm, 10:120-123mm, 11:125-126mm, 12:135-137mm, 13:140-142-145mm.Various piston rings are suitable for different types of motors.
【Piston Ring Compressor Components Made of Steel and Iron】 The piston ring and pliers are made of high-quality manganese steel and durable iron. The handle of the pliers is made of forged steel.The pliers can be parallel or perpendicular to the cylinder and insert the piston at the fastest speed.
【Pliers Tool Set With Tool Box】The case is beautifully designed and easy to carry. It is equipped with 14 piston rings and 1 pliers. Is an indispensable part of engines such as machinery, trucks, tractors, automobiles, diesel, and racing cars.
Show More
Show Less
Top 11
Universal Easy Intake Adapter with Strong Sealing Expandable Bladder for 12V Vehicle Pipes Fuel Leakage Detector Diagnostic Tester Easy Intake Bladder Automotive EVAP Smoke Machine Leak Tester
CMTOOL
AN-18
8.23 x 5.63 x 1.77 Inches
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
1.【Upgraded and Easy-to-Use Easy Intake Adapter】The easy intake adaptor is a bladder with a pressurized vapor pass-through and its diameter can be expanded to 120mm, allowing technicians to quickly and easily test the entire intake or exhaust system.
2.【Easy Intake Adapter with Excellent Sealing Performance】This universal easy intake bladder is an upgraded version of automotive piping system accessories. Remove the steel ring at the end in order to use a smaller fitting. The tightness is extremely strong, and the intake and exhaust leakage can be tested more quickly and accurately. Note: Please make sure the intake/exhaust diameter is bigger than 2".
3.【High Temperature and Tear-Resistant Easy Intake Bladder】The easy intake adapter is made of high-quality silicone rubber material, with excellent sealing performance, softness, high-temperature resistance, good elasticity, and tear resistance. The easy intake adapter can be used with any smoke machine or diagnostic leak detector to reduce the workload of leak checks.
4.【Easy Intake Adapter with Wide Compatibility】The expandable Bladder can be used with all EVAP system smoke leak testers and is 100% compatible with car intake or exhaust ports, including small cars and heavy trucks. Only a simple operation can quickly detect the integrity of the entire sensing system.
5.【Durable and Perfect Easy Intake Bladder】The adapter is suitable for intake and exhaust systems of any shape, such as square, rectangular, round, oval, and even large-angle and difficult-to-reach intake and exhaust systems. Using a universal easy Intake adapter, you can quickly diagnose any intake problems on the vehicle duct. Note: Inflating is to seal the air inlet, even if the inflated airbag is not perfectly round, it does not affect the perfect work!
6.【24-Hour Service and 3-Year Warranty】We provide this easy intake adapter with 24 hours friendly customer service and 36 months free warranty to ensure your shopping experience. We always put our customers first, if you have any questions about this adapter, please feel free to contact us!
Show More
Show Less
Radiator Pressure Tester Kit with Universal Rubber Adapter, Updated Coolant Pressure Tester Kit Coolant Vacuum Refill Kit, Automotive Cooling System Pressure Tester Kit with Carrying Case
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
1.【Upgraded Multifunctional Cooling System Pressure Tester Kit】The radiator pressure tester kit includes everything you need to quickly and easily test vehicle radiator system leaks and refill coolant, improve vehicle service life, and keep your vehicle running smoothly. Thanks to its universal rubber adapter, the coolant pressure tester master kit is compatible with almost all domestic and imported vehicles on the market. So whether you are a DIY-er or a professional, this set has you covered.
2.【Durable Radiator Pressure Tester with Good Airtightness】The radiator pressure tester uses high-quality aluminum pump cylinders instead of ordinary plastic pump cylinders, 21" rubber nylon resin hoses and brass fittings to ensure durability and good airtightness. The coolant leak detection kit can quickly find Whether there is abnormal leakage (About 10 minutes). The accurate shockproof meter (3 inches), the dial uses color code design to make the data clear and easy to read. (0-35psi/0-2.5bar)
3.【Car Coolant Vacuum Refill Kit with 47.24-inch Transparent Hose】The transparent coolant filling hose is convenient for observing the supply status of the coolant, and the joint is equipped with a brass filter to avoid the inhalation of metal or other impurities. The Automotive cooling system vacuum purge & refill kit can be evacuated within a few minutes to eliminate trapped air.
4.【Easy-to-Operate Cooling System Pressure Tester】Make sure to start with a full cooling system to properly identify leaks. The thermometer is made of stainless steel and measures the real-time temperature to check whether the temperature is too high. (range: 0-200°C/32-400°F). If the temperature is too high, you need to check whether there is a lack of coolant and whether the thermostat, cooling fan and water pump of the cooling system are faulty.
5.【Universal Radiator Pressure Tester with Carrying Case】Thanks to the custom molded carrying case of the coolant tester, you can easily organize every item of this device in an orderly manner, ready for your next job. The kit can also be protected during storage. Packing list: coolant system vacuum and refiller, air pressure gauge & air pressure pump, universal rubber adapter, vacuum generator, coolant hose, thermometer, American&European style air plug ×2, external hook ×2, internal hook ×2.
6.【24-Hour Service and 1-Year Warranty】We provide this radiator pressure tester kit with 24 hours friendly customer service and 12 months free warranty to ensure your shopping experience. We always put our customers first, if you have any questions about this kit, please feel free to contact us!
Show More
Show Less
Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
【Powerful Coolant Vacuum Refill Kit】 Perform vacuum pressure test and coolant vacuum filling service. Use an extra vacuum pump to work with this airlift coolant replenishment tool to create a vacuum in the cooling system, and then suck the coolant into the radiator. Quick replenishment system, no air pockets or hot spots are generated, to avoid distortion or other factors damaging the engine.
【Convenient & Widely Applicable Coolant Vacuum Cleaning Kit】By generating a vacuum in the cooling system, the time for refilling new coolant is greatly shortened, and there is no need for time-consuming air bleeding. This coolant vacuum cleaning kit is widely used Used in various domestic and foreign automobiles, SUVs, trucks, etc.
【Excellent durability & air tightness】 This coolant refill kit adopts a reliable metal structure to ensure durability and good air tightness, a reliable & durable tool set.
【Complete Coolant kit】The cooler anti-leak kit includes a brass T-connector and universal taper plug, 4 adapters of different sizes (O.D. 35mm, 40mm, 45mm, 55mm), suitable for most types of vehicles. The adapter can be connected to the adapter on the air supply tool, and then the radiator cover sealing cooling system can be replaced to help radiator purification and coolant supply.
【Caution When Using The Coolant Pressure Test 】 Wear goggles and gloves during operation. In addition, if the product does not contain a manual, please contact us to send the electronic version of the manual(Be careful not to change the coolant when it is hot)
Show More
Show Less
Fuel Injector Cleaner Kit 1000ML 150PSI Fuel Injector Cleaning Kit Non-Dismantle Car Fuel Injection System Cleaner Tester Tool Intake Valve Manifold Throttle Body Catalytic Converter Cleaner Machine
CMTOOL
CM100
16.3386 x 13.7795 x 4.1339 Inches
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
1.【1000ML Stainless Steel Canister & 150PSI Pressure Gauge】The fuel injector cleaning tool adopts a delicate high-pressure stainless steel bottle body, which is scratch-resistant, corrosion-resistant, safe and reliable. The customized pressure gauge can display air pressure and oil pressure, and a check valve is connected in the middle, which has good air tightness. The deflation can be repeated up to 10,000 times! The pressure level can be adjusted by turning the valve so that the detergent has better spraying performance.
2.【Complete Adapters for Wide Compatibility】The adapters in this fuel injection cleaning kit are the most complete on the market. Its main parts and joints are made of brass, and the connecting pipes and seals are made of selected perfluoro rubber materials, which have strong toughness and corrosion resistance, are more stable, and do not leak. This fuel injector cleaner machine is compatible with various car series and can clean all kinds of carburetors, electronic/mechanical fuel injection vehicles and light trucks in Europe, America, Japan, Korea and domestically produced.
3.【Bottom Oil Outlet & Hook & Rubber Protective Cover & Case】The advantage of the bottom oil outlet design is that there is no residue in the cleaning, and it will not corrode the cleaning equipment. The special hook design is convenient for hanging and moving the fuel injector cleaner tool. The pressure gauge has a special shockproof rubber protective cover to prevent damage due to falling. A custom heavy-duty plastic carrying case to better protects the car fuel injector cleaner kit from shocks for easy storage, quick organization and transport.
4.【Efficient Cleaning & Wide Application】Pneumatic cleaning, without external power supply, avoiding the fire hazard caused by electric sparks. The fuel injection cleaner tool can be used in conjunction with a fast and efficient fuel system cleaning agent (not included), and the carbon deposits in the intake valve, fuel injector, piston ring and combustion chamber can be completely removed in about 20 minutes, and the entire fuel system can be cleaned quickly and effectively, including TWC, Intake manifold, throttle valve and exhaust pipe, etc. It can restore vehicle power and driving performance, and greatly reduce fuel consumption and exhaust emissions.
5.【Packing List and 3-Year Warranty】The auto fuel injector cleaning kit include 25pcs vehicle adapters, 1pc TWC cleaning joint, 1pc throttle cleaning nozzle, 1pc hose opener, 1pc funnel, 1pc return pipe clip, 4pcs universal hose quick coupling, 1pc leader air hose, 2pcs hose clamps, 3pcs hose plugs, 3pcs thread plugs, 1pc user manual. We provide a 36-month free warranty and 24-hour friendly customer service to ensure your shopping experience. If you have any questions about this fuel injector cleaner tool kit, please feel free to contact us and we will provide you with a satisfactory solution as soon as possible.
6.【Warm Reminder 】(1) This automotive cleaning kit is only suitable for gasoline fuel injectors, not for diesel fuel injectors. (2) This kit does not contain cleaning fluid. (3) It must initialize the Throttle Position Sensor by automotive scan tool after cleaning. Otherwise, the fault-indicating lamp will lighten on, and PCM will record a DTC.
Show More
Show Less
Top 15
Fuel Injector Cleaner
CMTOOL
8.6614 x 5.7087 x 1.5748 Inches
Seller |
CPR Rank |
Amazon Fulfilled |
Prime |
Free Shipping |
SUPERTOOL HOME |
- |
✅
|
✅
|
✅
|
Features
Cleaner Adapter
Our CMTOOL Review
CMTOOL products on Amazon (April 2024)
What to buy from CMTOOL?
CMTOOL sell products mainly in the Automotive category.
Its popular products on Amazon include Spark Plug & Ignition Tools,Electrical System Tools And Automotive Replacement Fuel System Equipment.
If you intend to buy any of these products, then you can find them easily on Amazon.
Featured Reviews Related to CMTOOL
CMTOOL Pricing
The brand has over 70 products listed on Amazon with a price range of $9.99 to $2,999.00 form our picks.
Currently, the average price of their product is $180.07 which is considered affordable. You can make your choice from the list of products offered by the CMTOOL.
Is CMTOOL a good brand?
A brand is an essential factor when making a purchase. What do we think about the CMTOOL? Well, according to the information available on Amazon, CMTOOL products are sold by SUPERTOOL HOME.
The seller has received about 233 feedbacks from buyers with an average start rating of 4.8. With a rating as this from the number of feedbacks, we can conclude that CMTOOL is the brand can be categorized as average as its products receive an average rating which is still good and quite acceptable.
Can I know who the owner of CMTOOL is?
CMTOOL is selling on Amazon's North America Marketplaces. You can find out the actual owner of the brand at https://www.uspto.gov/trademarks/search.
From there, you can tell whether Amazon owns the brand or not. If you want to buy Amazon branded products, you can go here, and list some of their top brands. Amazon owns 100 private-label brands that operate in different markets.
Related Amazon Store for CMTOOL
Similar Competitors Brands like CMTOOL on Amazon
Methodology
How We Evaluated CMTOOL Products
We are crawling & scraping a large amount of data from 70 CMTOOL products and a countless number of reviews, you can gain valuable insights to enhance your understanding of various aspects related to CMTOOL, and you can use those data to help you make informed buying Spark Plug & Ignition Tools,Electrical System Tools And Automotive Replacement Fuel System Equipment decisions. Those recommend the 15 best products from CMTOOL based on thorough analysis and research by our CherryPicks-AI ranking system.
Why create this buying guide?
Our brand guide is designed to provide up-to-date & unbiased information about CMTOOL products. Our goal is to empower you with data-driven insights, enabling you to make better shopping decisions efficiently to save time. We prioritize earning your trust by providing reliable information and guidance.
Who is selling CMTOOL on Amazon?
According to the information we have, currently there is only one seller (SUPERTOOL HOME) offering this brand, and we have not found any other Amazon stores engaging in reselling CMTOOL.
It's important to note that this information is based on the data available to us, and there could be additional sellers or circumstances that we may not have identified. However, as per our findings, the brand seems to be exclusively offered by the single seller mentioned.