Automotive From classAcustoms on Amazon

Galvanized Mounting Flange (CAUTION IT IS SHARP))

Mounting Hardware, Screws, Putty is NOT INCLUDED!

Manual Crank

Easily Removable Screen

Mounting plate measures 2" x 1 7/8" - Catch measures 1 1/4" x 7/8"

Locking style allows for use with a padlock (padlock *NOT* included)

Mounting hardware is *NOT* included

Mounting plate measures 2" x 1 7/8" - Catch measures 1 1/4" x 7/8"

Locking style allows for use with a padlock (padlock *NOT* included)

Mounting hardware is *NOT* included

TANKS BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed

40 Gallon Tank Measurements - 39 1/2" x 18" x 13" (+/- .25")

46 Gallon Tank Measurements - 42" x 18" x 14" (+/- .25")

FLANGE WIDTH: 7/8" Around Entire Edge

INNER DIMENSIONS OF BOWL: 11 3/8" X 8 9/16" Deep

DRAIN OPENING: 1.5" NOT INCLUDED (you will shop for a bar sink drain)

The 10 and 13 gallon tanks each have two 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1 1/2" female NPT fittings (fitting is not closed, this fitting is completely open)

10 Gallon Tank measurements - 18 3/4" x 13 3/4" x 8 3/4" (+/- .25")

13 Gallon Tank measurements - 21" x 16" x 9" (+/- .25")

30 and 40 GALLON EACH TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.

30 GALLON TANK MEASUREMENTS 34.5” x 12” x 17.5” -Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)

40 GALLON TANK MEASUREMENTS 39.5” x 13” x 18” -Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)

TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.

NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.

Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.