Tools & Home Improvement From CKE on Amazon

🔦Zinc Plated for Inch Size - Includes 14 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20

🔦Black Oxide for Metric Size - Includes 12 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75

🔦Fast Size Finder - Thread sizes are permanently stamped onto each gauge. The individual gauges rotate freely on the wire cable for fast thread verification.

🔦Size: Overall length of the Receiver: 2.28", Threaded stud length: 2.75", Assembled and fully threaded size: 3", Swage end length: 2.25".

🔦Easy to install and detach: Use the hex socket to prevent slipping while tensioning the cable, then rotate the receiver to tense the wire rope. Remove the big end by turning the receiver if you need to redo or remove it.

🔦Package List: 20 * Invisible Stud, 20 * Stud Receiver, 20 * Dome Swage Dead End, 1 * Hex Key Tool.

🔦Compatibility: These Stainless Steel Protector Sleeves suitable for 1/8" Cable Railing, perfect for DIY your own cable railing project, good for indoor or outdoor applications. Search "B0BBFQ1RH3" to purchase CKE 600 Feet 1/8" T316 Stainless Steel Cable.

🔦Size: Overall Length of Sleeve: 3/4", Flange Diameter: 1/2", Required Hole Diameter: 1/4", Drill Bit Diameter: 6.4mm.

🔦Package: 80 * Stainless Steel Protector Sleeves and 1 * Drill Bit.

🔦Size: Overall length of the Receiver: 2.25", Threaded stud length: 2.75", Assembled and Fully Threaded size: 2.95".

🔦Applications: Provide for a DIY cable railing project, it can be used on all sorts of posts in wood or metal. Suitable for indoor or outdoor applications.

🔦Package: 40 Pack Stainless Steel Invisible Receiver and Swage Stud End + 1 Pack Allen Wrench

🔦Size: Overall Length = 3-7/8", Thread Length = 1-7/8" - 1/4" - 20, Hole to Drill=0.25".

🔦Applications: Perfect for installing a DIY cable railing system project, excellent for both outdoor and indoor application.( wood, steel, aluminum post on deck railing).

🔦Package: 60* Threaded Terminal Studs ( includes washer and lock nut) + 1* Drill Bit + 1* Spanner Multi Tool.

🔦【Size】Fit for 1/8 inch stainless steel cable. Apply to 2" x 2", 4" x 4", 6" x 6" width wood post or metal post. Overall Length = 9.17", Thread Length = 5.9", Hole to Drill=0.25".

🔦【Easy to Install】1.Drill the hole about 0.25", then please refer picture 4 to installl. This 180 Degree Adjustable Angle Swage Threaded Stud Tension End Fitting Terminal Cable Railing Kit is a streamline stainless steel wire balustrade systems for straight, stair or angled sections when using timber posts.

🔦【Package List】20 Pack Adjustable Angle Swage Threaded Stud +1 * HSS Drill Bit.

🔦Size: Turnbuckle: 7.2" Deck Toggle End: 3"

🔦What You Get: 12 Pcs Deck Toggle Turnbuckles, 12 Pcs Deck Toggle Ends, 48 Pcs Screws and 1 Pc Spanner Multi Tool.

🔦Size: Overall Length = 4.5", Thread Length = 1.83", Hole to Drill=0.25".

🔦Applications: Perfect for installing a DIY cable railing system project, excellent for both outdoor and indoor application.( wood, steel, aluminum post on deck railing).

🔦Package: 60*Threaded Terminal Studs ( includes washer and lock nut) + 1 Pc Spanner Multi Tool.

🔦Size: Tilt Angle = 45 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28"，Flange Diameter =0.71"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm.

🔦Design: Exclusive Patent Design Product.Often used in conjunction with straight wood post protectors, this 45 degree wood post protectors transition wood post protectors from straight runs transitioning to an angled run. Widely used this on intermediate angled posts on stairways and ramps, it can replace the combination of Straight Protector Sleeves + 45 Degree Angle Beveled Washer, create a cable railing system that exposes your beautiful view while only exposing a nearly flush fitting head.

🔦Package: 40 * 45 Degree Stainless Steel Protector Sleeves + 1 * Drill Bit.

🔦Size: Tilt Angle = 30 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28"，Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm.

🔦Design: Exclusive Patent Design Product.Often used in conjunction with straight wood post protectors, this 30 degree wood post protectors transition wood post protectors from straight runs transitioning to an angled run. Widely used this on intermediate angled posts on stairways and ramps, it can replace the combination of Straight Protector Sleeves + 30 Degree Angle Beveled Washer, create a cable railing system that exposes your beautiful view while only exposing a nearly flush fitting head.

🔦Package: 40 PCS 30 Degree Stainless Steel Protector Sleeves + 1 * Drill Bit.