Home & Kitchen From Cen-Tec Systems on Amazon

Quiet Drive poly-v belt is always in contact, which results in a dual brushed edge cleaning so no dirt escapes

Can be used to replace a Nutone CT600

Includes a soft molded bumper front and side bumper. A clear view window to confirm the agitator’s operation. Soft over molded wheels to run smoothly on carpet and quiet on hard floor surfaces

Has a four position height adjustment allows the brush agitator to be set to carpet conditions for optimum cleaning

A quick release neck permits the cleaning wand to drawn from the brush for above the floor cleaning

The fully integrated telescopic electric wand connects the CT20QD to central vacuum and canister electric hoses with a flush plug position electrical connection.

Note : Please review the A+ marketing below to insure this powerhead will work with your current system

Compatible with wet-dry vacuum brands including: Karcher, Tennant, Nilfisk, Perfect, Power Flight, Hawk, Castex, Mercury, NSS, and Sanitaire

The ABS compression collar is resistant to chemicals, floor strippers, and avoids the pitting and stripping which are associated with cast metal collars. The compression lock will accept tools with either a 1 ½” or 1-9/16” collar

The tool body is ABS to resist chemicals and accept the wear and tear of commercial use. The blades are secured with anodized aluminum brackets and secured with corrosion resistant screws

Full 1-piece S-wand

The upholstery tool is designed to mimic the commercial car wash tool with a wide throat to pick up large and non-uniform debris

Designed to fit close to the 360 degree swivel end on the hose to make cleaning easier to control the tools when working in confined space. The swivel feature allows the tools to be positioned for maximum effectiveness

Includes two plastic extension wands and a 12” natural fill floor brush allowing you to not only clean the car but also tidy up around the garage

Contains a handy hose hanger and caddy bag for holding all the tools when not in use. We recommend hanging the hose at close to eye level which reduces the need to tightly coil the hose

Compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and

The 50 foot, 1. 25" diameter crush proof commercial grade hose will last for years, even in harsh high use environments

The lightweight highly flexible hose is made in the USAand is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle

The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a USA-made hard floor brush

To confirm this package will work with your inlet valves, you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening

System includes three light weight aluminum telescopic wand as well as three adaptor wands with compression collars to secure accessories for cleaning pipes, horizontal, and vertical surfaces both elevated or on the floor

Each section of the system is designed to lock in place for safe cleaning overhead or when extending horizontally from an elevated platform. At less than 6 pounds equipped with the tool of choice it is easily controlled in use

Compatible with all major backpack and commercial canister vacuums equipped with 1. 50” hose

Compatible with all major brands of commercial vacuums equipped with 1. 50” cleaning accessories including Pro-team, NSS, Tennant, Powr-Flite, Mosquito, Perfect, Hawk, Sanitarie, Bissell, Hoover, Mercury, and Sandia

Designed for every element to be securely locked in place to protect the user working overhead or if working from an elevated platform in the vertical plane insures against the tool separating from the cleaning wand and falling to the surface below

Includes a carry bag to take the attachment set from job to job

The CT16QD long life reinforced belt engages the agitator away from the edge of the brush providing for brushed edge cleaning to both sides of the nozzle. This design insures superior edge cleaning and excellent grooming of the carpet surface helping to preserving the carpets appearance without damaging the carpet fibers

Includes a soft molded bumper front and side bumper. A clear view window to confirm the agitator’s operation. Soft over molded wheels to run smoothly on carpet and quiet on hard floor surfaces

Has a four position height adjustment allows the brush agitator to be set to carpet conditions for optimum cleaning

A quick release neck permits the cleaning wand to drawn from the brush for above the floor cleaning

The fully integrated telescopic electric wand connects the CT16QD to central vacuum and canister electric hoses with a flush plug position electrical connection.

Can be used as a replacement for a Nutone CT600 electric brush

The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue. The hose is highly flexible and has a soft surface with rounded corrugations to avoid damage to household furnishings without the need for a hose sock

Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacuumed, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m+s, md, imperium, honeywell, and most regional brands

The eva body and pearl gray color will not mark walls, floors, or furnishings and the 40 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present

The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose

Total control hose provides on and off control of the vacuum at the handle

The 91353 is a low voltage hose, so it is not compatible with electric power nozzles

Features an electro-static conductive (ESD) 1” soft TPE based tool adaptor for mating with all major brands of power tools and shrouds equipped with a 1” male connector or 1. 425” female connection. The adaptor is designed with four concentric rings on the inner diameter to insure a positive leak proof connection that will stay in place while the tool is in use. The 1” adaptor is fitted to an electro-static conductive quick change bayonet equipped with and air relief to permit control of the vacuum to insure free movement of the power tool

The second conductive quick-change bayonet fitted with a conductive 1-1/2” soft TPE adaptor for mating with power tools designed with a 1-1/2” male connection. This second adaptor is designed with three concentric rings on the inner diameter to insure it stays in place in applications with heavy debris flow under high vacuum like found with miter saws

Cen-Tec’s bayonet system provides 360 degrees of rotation to reduce tension from the hose and permit free movement of your power tools. The durable acetal clip allows for a quick change of ends, eliminating lost time and helping you to move quickly from tool to tool helping you keep your shop environment safe and clean

he proprietary electro-static conductive 2-1/4” tank end is designed to maximize the opening into your vacuum improving vacuum performance and reducing the risk of clogs from larger debris

The adaptors are designed for compatibility with all major brands of power tools including Bosch, Festool, Milwaukee, Hitachi; Fein; Cobalt; Porter Cable; Black and Decker; Dewalt, Ryobi and many private label brands of tools and dust collection shrouds

Compatible with major tool brand vacuums and is also compatible with major brands of home shop vacuums like Shop Vac, Ridgid, Craftsman, Vacmaster, Dustless, Fein, Cobalt, Dewalt, and Festool

Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 1" soft TPE fitting, and a second bayonet with a soft 1. 50" TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool

The soft molded TPE fitting measures 1" on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1" soft TPE part measures 1. 40" on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit

Includes a second bayonet with a soft molded TPE fitting that measures 1. 50" on the inner diameter with three concentric rings to hold firmly to the power tool even when carrying a substantial flow of debris in the air stream. The fitting measure 1. 90" on the outer diameter. The soft TPE allows the fitting to form to the shape of the exhaust port off of the selected power tool

The inner collar and acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1. 75" on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature

Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi and Milwaukee Electric

The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vac master, Ridged, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5" vacuum connection