Toys & Games From BQLZR on Amazon

International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions

Easy to use and very durable

They are plastic, making it more suitable for drifting. The quality of the rims is perfect,

The product contains four wheels, the dimensions of the four are the same, and the dimensions are: Diameter 65MM, width 26MM, adapter: 12MM

Tires and rims are separate parts that you need to install yourself. This also allows you to choose to replace the parts that need to be replaced

EASY TO USE- The head with the neck shaft was modified as the key to a "neckless" head that fits my figure.

NOTE: Please measure the size before use, so that the size does not fit.

replacement for phicen models.

【Notice】If you find the head connector is too small to fit the body, please try to heat the insert connector with a hair dryer.

OD: 65mm/2.56 inch

ID: 52mm/2.05 inch

Width: 26mm/1.02 inch

Produced by ABS plastic

Tiny bust usable for a beach scene for the summer

The fun contents of these polybags can be used as party favors, to decorate for a birthday party or used as non-edible cupcake toppers and cake decorations. These fun pieces are fantastic for craft projects and are perfect for travel fun and bath time entertainment.

Each piece is about 0.96 to 1.06 inches, but depending on the pose of the little person in the work, the size of standing and sitting posture is different

Note: They are not flexible and can only maintain their original posture. You cannot change their posture by pulling

Replacement for Traxxas Replacement for SLASH 4X4 RC1:10 Rally Car.

instructions： Take the wheel off and the set screw out of the rear differential and pull it out from the side

Lubricate them for longer than normal use

Replacement for Traxxas Slash SLA018. Replacement for Traxxas Slash NSV775 1/10 RC Car.

Replacement for drive shaft CVD: Replacement for 6851R 6851X 6852R 6852X Replacement for Traxxas 1/10 ，Replacement for Stampede 4x4 VXL RC Truck. Accessoy part Replacement for Hossm 4X4 VXL.Replacement for Rustler 4X4 VXL. 3.Replacement for Rustler 4X4. Replacement for Slash 4X4 Platinum.

Replacement for Slash 4×4 Ultimate. Replacement for Slash 4X4 VXL Replacement for Slash 4X4. Replacement for Stampede 4X4 VXL. Replacement for Stampede 4X4

[Real Design]:The scale model figures are made of high quality ABS plastic which makes these model train figures look vivid and durable, light-weight with well-made details like buttons, ties and hats, make your miniature scene more realistic and lively

[DIY for Fun]:Scale train model people can be painted and colored, make your model railway come to life with these "ready to paint" miniature model people, "dress" your people colours which you prefer with acrylic paint, great for your DIY projects, just enjoy them at ease

[Wide Application]:These tiny people figures can be suitable for any scale modeller whether you are an architect, student or model railway enthusiast, such as model train layout, architectural building, train station layout, school project model, they can be applied to make miniature dollhouse, they will have more fun with it

My product is intended for ages 15 years and older.

For replacing old, broken or missing drive shafts.

[Long-lasting performance]: The drive shaft has greater turning power and stronger use, high reliability, and ensures smooth transmission.

[Easy Assembly]: The drive shaft can be installed directly without any modification. It's designed for smoother rotation

[Note]: Please do not vigorously turn the tip of the drive shaft, and pay attention when using it to avoid product damage and inability to use.

Note：Please check your model and size before buying or please feel free contact us.

Note:The tire and wheel rim are separated. High performance rubber tires must be mounted and glued to the wheel rim by yourself.

They are made of high quality material,long durability and lightweight,upgrade Parts increases car overall performanceu.

NOTE:The product is applicable to RC1:10, and the size is appropriate, and it usually will not fall off. At the same time, the installation can be made more secure by applying strong glue

An useful tool for locking the engine plugs to remove flywheel easily.

Product size information: 70 * 10 * 5mm

The appearance of the product is blue, which can make your product look better

Part No:R020

Suitable for RC car with VX 18 Replacement for Nitro Engines.

Suit ForVx 16 18 21 Engine

NOTE:The distance between the center holes on two sides of the hand puller is 27mm, and the opposite side of the-way bearing is straight

Applicable to all brands and proportion models

They also look elegant compared to most plastics.

Note: The product is all metal. You can wrap your hands with soft cloth or paper towel to avoid pain when your hands touch the metal

RC High Grip Rubber Tires

Size:36 x 26mm/1.42 x 1.02"(L x Dia),Please make sure the color and size are what you want before buying.

You can also adjust the shelling time of the eggs, try to keep them as consistent as possible to avoid too much difference in body size of the young birds and increase the difficulty of feeding. We can secretly replace the fake eggs with fake eggs when laying eggs, make a nest, and then put the fake eggs. Take the eggs out and replace them with real eggs. At the same time, let the females hatch, and let the birds hatch at the same time and grow to the same size.

Excessive egg production can easily lead to the loss of calcium in female birds and even failure to give birth. If you want a female bird to lay fewer eggs, the easiest way is to let it hatch by itself. If the female bird lays the first egg, it will lay the second and third eggs. We need to put a fake egg every day, and the female will stop laying eggs before they are finished. Realistic fake eggs can successfully deceive the female bird, making it much less than before.

With disassembling tool,makes installation and disassembly easier.

Nice little touch of personality and color for your R/C controller.

ProTip: Open your controller up first and add a dab of hot glue to each 3.switch. It will make swapping out the nuts MUCH EASIER and less frustrating.

The included tool, while it will work great on the 3-way switchs it is a PITA to use on the 2-way switchs (the 'on/off' switches).

The product is intended for ages greater than 14.

Made of high quality metal to ensure the serve time.

Uses 10th scale rc servo.

Size: 70mmx35mmx16mm

Package include:1x Decoupling Devices,4x Gasket,9x Screws

DIY Replacement parts for remote control vehicle models.

The diameter of the mounting hole is 24mm

This button with light is composed of: button body, fixing nut, washer, bracket, LED light, micro switch, so it does not include assembly

The rated voltage of the LED lamp: DC12V (the LED lamp has positive and negative poles, and the micro switch has no positive and negative poles). The current is about 15mA-23mA.

They are holding up just as good on asphalt

These are a hard plastic tire that is ideal for carpet or smooth concrete,could drift well on smooth carpet (carpet isnt torn so the carpet wont grab the tire)

NOTE:Please use glue to stick the wheel and tire well before use, which can prevent the tire rim from separating and maintaining longer