Tools & Home Improvement From BENCHMARK FR on Amazon

Material - Comfortable 6.2 ounce (7 ounce on black and orange shirts) 100% FR cotton made to be breathable, moisture wicking, skin safe as well as lightweight

Safety - NFPA 70E ARC Ratings: CAT/HRC2 ATPV 8 cal/cmsq. NFPA 70E ARC Ratings: CAT/HRC2 ATPV 8.9 cal/cmsq for black and orange shirts. Meets the requirements of NFPA 2113-2018. Meets requirements of performance specification ASTM F1506, OSHA 1910.269, OSHA 1910.962

Laundry and Care - Machine wash cold or warm temperature using liquid or powder detergent. Tumble dry using low heat. Do not use bleach. Expect your shirt to shrink about 4% total after the first one or two washes. Safe for both machine and industrial wash

Engineered For Comfort – When we developed our arc and flame-resistant face masks, we did it with comfort in mind. Instead of using multiple layers, we use a single layer that provides protection but is breathable. It has a contoured fit, so it stays securely over your nose and chin. Instead of having an interior polyester tag rubbing your face, we used a non-flammable stamp on the outside. The seams are on the outside so you they don’t rub against your nose.

Ear Loops, Not Ties – Instead of using ties that are uncomfortable, loosen and hang down, we create our FR face mask with ear loops so it is easy to put on and take off even if you are wearing a hard hat or welding helmet.

Made in USA - We believe in making high quality fire retardant rated products right here in the USA. These arc and flame-resistant face masks were designed, developed, tested, printed and sewn at our facility in California. BENCHMARK FR manufactures in-house to ensure quality and value. Proudly bearing the "Made in the USA" label

Material – Skin safe flame resistant Modacrylic/Cotton/ Nylon blend

Safety – CAT/HRC 1 6.4 cal/cmsq, Meets the requirements of performance specification ASTM F1506, NFPA 70E, OSHA 1910.269

Laundry and Care – Machine wash warm. Tumble dry low. Do not use bleach

Arc & Flame Resistant For Life – This lightweight 7.5 ounce, inherent FRC material is a soft, inherent blend of Modacrylic, Cotton and Nylon. It will self-extinguish and not melt or drip in the event of an arc flash or flash fire. Your FR Hard Hat Liner, neck protector will remain arc and flame resistant regardless of the number of times it is washed and worn. These neck shade material is ASTM F1506, OSHA 1910.269 and NFPA 70E CAT/HRC 2 Compliant with an EBT = 9 cal/sq-cm.

Skin Safe, Tired of Itching? –- The FR Hard Hat Liner is safe to wear directly against your skin. The flame-resistant materials used are non-allergenic and will not react with your skin. We voluntarily meet the most stringent international health codes related to formaldehyde, ammonia, arsenic, heavy metals and other toxins. Go ahead and sweat in it.

Made in USA – Since 2002, we have made high quality flame and arc flash resistant products right here in the USA. These arc and flame-resistant neck protectors were designed, developed, tested and sewn at our facility in California. Because we are the manufacturer, BENCHMARK FR can better control the quality of our product to ensure the best value possible. Proudly bearing the “Made in the USA” label.

Comfortable & Strong FR Clothing for Men: The core of our fabric is a grid structure made of the ballistic materials kevlar and ballistic nylon surrounded by other inherently FR materials. This grid provides superior mechanical strength, drape and flexibility. The Silver Bullet FR shirt is so durable, that it outlasts the competition by a factor of two. It also has less than 1% shrinkage in the wash and will not fade like other shirts.

Inherent Fire Retardant Properties: The multihazard arc and flame resistant properties will not change regardless of the number of wash and wear cycles. The Silver Bullet FR shirt is lightweight and comfortable, it also provides HRC/CAT Level 2 protection with a 9 cal sq/cm rating with NFPA 2112 certification. Meets or exceeds NFPA 70E compliant and ASTM F1506 standards. It is safe to wear against your skin and you can wash it at home or at the industrial laundry.

Made in the USA: We make all our Silver Bullet FR shirts in the U.S.A. We are a family owned manufacturer, this allows us to maintain the highest levels of quality and control from start to finish. Each Silver Bullet flame and arc flash-resistant shirt has its own serial number. This advanced FRC blend FR Viscose, Para-Aramids, Nylon-66 and antistatic fibers is unlike any other piece of FR clothing you have worn.