Industrial & Scientific From BEAMNOVA on Amazon

3 IN 1 DESIGN & GOOD HEAT DISSIPATION PERFORMANCE - Three control methods: manual control, wireless remote control and wire control. It can adapt to different lifting requirements anytime and anywhere. Copper core motor has good thermal conductivity and electrical conductivity, low voltage loss, high motor force and low heat production. NOTE: 1 * 12V/23A battery are needed for the remote control (not included in the package).

PORTABLE MACHINE - Only weights 10kg / 22lbs, much lighter than traditional ceiling mounted or pole mounted hoist. You can easily lift the crane by the side handle and place the compact body in the car trunk for transportation. The hook on the top makes it easy to hang on any pole with sufficient weight, and can be removed at any time without any tools.

UPGRADED VERSION - Larger capacity; comes with outlet pipe, user manual & all accessories needed. The welding process is improved for a smoother welding port. Threads are added at the connect hook. Corners are rounded to prevent scratches. The cover inner side is added with a rubber ring to make sure no leakage. Also, the faucet is sealed with the ring.

EASY TO INSTALL - BEAMNOVA Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to the drain. We recommend solvent weld pipe is used for a secure fit. Also, make sure the trap is on the flat floor.

WIDER STRIPPING COMPATIBILITY - The adjustable blades and rollers on the cable wire stripping machine fit wires with diameters from 0.08” (2 mm) up to 0.984” (25 mm). Also, the design makes the recycling work more labor-saving. NOTE: When cutting 20-25 mm wires, it may need to remove the front panel.

LABOR-SAVING MOTOR-DRIVEN STRIPPING - Equipped with a 35W electric motor, a 4-gear structure combination (12 gears in total). Compared with an ordinary 3-gears one, BEAMNOVA electric wire stripping machine is quieter, more powerful, efficient, runs smoother, and has a longer service life. The motor-driven model strips wires between 2 mm - 10 mm; Flexible Wire Within 2 mm.

Material: Stainless Steel. Color: Black. Size: 40 x 40 x 90cm/ 15.74" x 15.74" x 35.43"(L*W*H).

MODERN STYLING - BEAMNOVA Stainless-Steel Trash Can with Ash Tray features two stylish perforated panels, two convenient openings, and a top tray that enhances high traffic areas while keeping them clean and litter-free. Suitable for commercial indoor or outdoor places, such as patio, park, lobby, mall, yard, garage, office, hall, etc.

QUALITY STEEL - BEAMNOVA Sheet Metal Hole Punch Set is made of high hardness metal, durable, and not easy to deform. NOTE: Hydraulic oil leakage does not affect the use. Max Thickness for Steel: 3.2 mm (11 gauge). Max Thickness for Stainless Steel: 2 mm (14 gauge).

MAX 15-TON PRESSURE - With a hydraulic pump, the Integrally Cast Cylinder Head has max 15-ton punching pressure, which allows you to punch holes with little burrs and effort.

UPGRADED VERSION - Larger capacity; comes with outlet pipe, user manual & all accessories needed. The welding process is improved for a smoother welding port. Threads are added at the connect hook. Corners are rounded to prevent scratches. The cover inner side is added with a rubber ring to make sure no leakage. Also, the faucet is sealed with the ring.

OPERATING PRINCIPLE- Grease traps work on the basic principle that FOG's (Fats, oils & grease) float on water and solid particles sink. As the inflow of wastewater from the sinks enters the grease trap, the fats, oils, and greases rise to the surface and are trapped between the baffle plates. The baffles on the outlet prevent FOG's from flowing directly through the unit.

HIGH LOAD CAPACITY - Single line can carry 1100 pounds, 32.8 feet per minute, up to 40 feet. The two-wire can carry 2200 pounds, 16.4 feet per minute, and up to 20 feet. Heavy-duty, high load-bearing galvanized hook with pulley for double-line operation.

HIGH HEAT DISSIPATION PERFORMANCE - Copper core motor has good thermal conductivity and electrical conductivity, low voltage loss, high motor force, and low heat production. The built-in cooling fan improves airflow.

SAFE & DURABLE - The side locking nut adopts an anti-loose design, which ensures the hoist does not fall off the beam. Thickened Manganese steel frame and powder-coated finishing are wear-resistant, strong & long-lasting.

UNIVERSALLY FIT - Fits standard or wide flange I-beam tracks. Dual wheels are designed for a straight or tapered beam track and work on both straight and curved tracks.

FLEXIBLE - The whole machine is small and light, with flexible steering, and it can not only cut straight lines but also cut various shapes such as arcs and coin-sized circles.

DOUBLE CUTTER HEADS - Comes with 2 heads for different material shearing: mild steel plates and stainless-steel plates. The worn blades can be removed to sharpen, or replaced for a better cutting effect.

MULTIPLE SIZES REPLACEABLE GUN HEADS - Comes with 3 gun heads of different sizes: M6, M8, M10, as well as their hex connecting rods, 5 mandrel replacements of each size, 50 rivet nuts of each size. Recommended pressure: 100 psi. Note: Too low pressure affects the use of the machine; too high pressure may damage the machine or accessories.

QUICK TO CHANGE & EASY TO USE - The self-locking gun head allows you to assemble and disassemble the mandrels effortlessly with bare hands in one minute. The running speed can be changed by the air inlet adjusting knob. Only need to press F and R to set a rivet nut.