Industrial & Scientific From BCZAMD on Amazon

BCZAMD Silicone Slap Mat 410 X 310mm Clean-up or Resin Transfer to Protect Work Surface for Photon S DLP SLA LCD 3D Printer Accessories - Gray

Ratings for BCZAMD (CPR Score)

Features

;Use to protect your work surface, spill and splash all you like and when you are done, take it outside; the resin will harden, and with a simple flex, it pops right off to be safely and easily disposed of; Use under each of your printers as a catch-all

Stop working with resin on cardboard and paper towels, throwing away a toxic gooey mess after every clean-up or resin transfer

Show More

BCZAMD 3D Printer Spare Parts Titann Hotend Extruder Nozzle Kit with Heater Blcok Heating Pipe V6 Throat Tube Heatbreak Metal Idler Arm for Artilery Sidewinde X1 X2 Geniuspro Hot End Imdinnogo

Ratings for Yalu&Freedom (CPR Score)

Features

Genuine replacement part kit and mandatory replacement for the Artiller Sidewinde extruder handle.

Must have accessories for your artiller: upgrade arm, more durable.

Show More

BCZAMD Prusa I3 MK3 MK52 Gold Double Sided Textured PEI Spring Steel Sheet Powder Coated PEI Build Plate for Prusa i3/Ａquila pro/CR6 SE MK2.5S MK3 MK3S, 253.8 x 241MM

Ratings for BCZAMD (CPR Score)

Features

2019 New Upgrade for 3D Printer Print Bed, Compatible with Prus MK2.5S, MK3/3S

Size: about 10 x 9.4 inch

Show More

BCZAMD Heater Cartridge 24V 64W 3D Printer Replacement Hotend Parts Compatible with All Versions of The Artilly Sidewinde X and Geniu Extruder Accessories-2Pcs

Ratings for BCZAMD (CPR Score)

Features

A necessary artilery parts

Compatible with all versions of the original Hotends Genius and Sidewinder X1.

Show More

BCZAMD 3D Printer Replacement Parts FPC 20 Pin Ribbon Cable No Bend Compatible with Artiler Sidewinde X V.1-V.3 Controller Board-2Pcs

Ratings for BCZAMD (CPR Score)

Features

Replacement cable, Compatible with V.1-V.3 Sidewinde X1.

Material: FPC, Flexible, Stable and durable

Show More

BCZAMD 3D Printer Heating Plate Adhesive Silicone Heated Mat 120V 750W with NTC 100K Thermistor No Hole for Crealit Ender 3 Max 3D Printer Parts 300 X 300mm (Approx. 12" X 12")

Ratings for BCZAMD (CPR Score)

Features

Don't drill the holes by youslfe, heater mat has no holes for the bed screws, which suitable for universal printer without perforated hot bed. （Not applicable to some models, such as the Rattlesnake sidewinde X1 and CR10）. Please make sure it matches your printer when you buy. In addition, we will launch a heating pad with perforations, so please look forward to it.

The heating pad is durable and effective in heating. When you feel the print bed is not hot enough, suggest you to check the mos module, SSRA, the motherboard interface. For example the issues maybe happen for SSR,disconnect the SSR cable directly connect it to the board, about 3-4 seconds, disconnect it immediately, touch the mat, if feel a little hot, then it is still good. You need to replace a new SSR relay then test it again.If you can't troubleshoot, contact us directly.

Show More

BCZAMD 3D Printer Upgrade Parts Filament Spool Holder Adjustable Printing Material Mount Rack Bracket Smooth with Bearing for Ender 3 V2 Pro Ender 5 Series CR10S S4 SE/ 3D20/ TEV Nereus/X-Pro

Ratings for BCZAMD (CPR Score)

Features

Pulley Spool Holder:New design, with just a small push the spool rotates. The feed is smooth as silk. The base provides some weight and the 4 pads can prevent slipping, the wheels rotate very gently.

Apply to all printing filaments. Suitable for 0.5kg 1kg PLA ABS 1.75mm 3.0mm 3D printer filament, especially heavy TPU filament.

Show More

BCZAMD 3PCS NTC 3950 100K Thermistor with 1 Meter Wiring for EinsyRambo Mainboard Prus i3 MK2S/MK3 3D Printer Heatbed or Hot End Imdinnog

Ratings for BCZAMD (CPR Score)

Features

This thermistor head is designed for the Prus i3 MK2S/MK3 3D printer.

Wire length:1m/39.37 inches, the connector is 2pin XH2.54.

Show More

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

Ratings for BCZAMD (CPR Score)

BCZAMD Imdinnogo 3D Printer Nozzle Cleaning Brass Wire Toothbrush Tool Brass Brush Handle Hot End Cleaning Toothbrush (2Pcs)

Ratings for BCZAMD (CPR Score)

Features

This toothbrush is made of copper wire and is specially designed for cleaning the hot bed of 3D printer nozzles.

To clean the nozzle, heat the nozzle to 190°C.

Show More