Tools & Home Improvement From Artiwell on Amazon

HIGH QUALITY MATERIAL AND ANTI-FLAKED OFF COATING: Artiwell Tip-Toe Tub Trim Set Coming with High Quality Brass , Zinc and ABS Construction ,designed for Long-Lasting Durability, Improving coating technology to improve anti-flaked off performance ,withstands longer lasting soaking in water.

STANDARD DESIGN: Brass Threaded Adapter Bushing Fits 1-1/2" and 1-3/8" Drain Shoe Sizes. This Drain can fit both 1-1/2" coarse thread and 1-5/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-3/8" Fine thread.

TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional and national industry standards. We are proud of the products we sell, you will be too.

EASY TO INSTALL: It is best installed by applying plumber’s putty between the flange and top of the sink. Only need to make a tight seal between the top of the sink and the flange, and even be a plumber yourself.

WIDELY USED: Suitable for all major manufacturers' 3-1/2 inch sink opening garbage disposal. Replace the dirt flange on the new or existing sink, which can be used to decorate the sink and match the sink surface perfectly.

A INNOVATOR FOR THE KITCHEN: We strive to build on better living. We’re innovators, passionate about life and the things that make it better. When you partner with Artiwell, you partner with the future.

FIT STANDARD TRIP LEVER BATH TUB DRAIN: The height can be adjusted from 13-1/4” to 15-1/4” inches, Can fit 14” to 16” Standard Trip Lever Bath Tub Drain.

FIT MORE HIGHER TRIP LEVER BATH TUB DRAIN: With an Extension linkage rod, Do it yourself to add the 8” Extension Rod onto the Original Linkage assembly so that can extend the length of the Linkage assembly, can fit 22 Inch to 24 Inch height Trip Lever Bath Tube.

DIAMETER: 1-5/16” dimeter, specifically made to repair trip-lever drain assemblies. The brass construction that provides strength and durability and will endure the rigors of every day use.

STANDARD DESIGN: Brass Threaded Adapter Bushing Fits 1-1/2" and 1-3/8" Drain Shoe Sizes. This Drain can fit both 1-1/2" coarse thread and 1-5/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-5/8" Fine thread.

Easy Installation: Includes Both drain rubber gasket and No putty gasket , you needn’t the putty for the installation, with easy illustrated do it yourself instructions. So you could install the Bathtub Drain Stopper easily and quickly, great for saving your time., It takes only 5 minutes to complete the installation.

TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional and national industry standards. We are proud of the products we sell, you will be too.

STANDARD DESIGN: Brass Threaded Adapter Bushing Fits 1-1/2" and 1-3/8" Drain Shoe Sizes. This Drain can fit both 1-1/2" coarse thread and 1-3/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-3/8" Fine thread.

EASY TO INSTALL: Includes drain rubber gasket and easy illustrated do it yourself instructions.so you could install the Bathtub Drain Stopper easily and quickly , great for saving your time.It takes only 5 minutes to complete the installation.

TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional and national industry standards. We are proud of the products we sell, you will be too.

WIDELY USED SCREW-IN SHOWER DRAIN GRID: Can Fits most manufacturers’ Cast Iron and Plastic Shower Drain.

EASY TO USE & INSTALL: Comes with color matched screws, 2 ea. 10-24 x 3/8” Machine Screws and 2 ea. 8#-3/8” Flat Head Self-Tapping screws included. Easy to install

KEEP YOUR DRAIN CLEAR: This useful accessory helps keep unwanted debris and foreign objects out of your drain pipes. It will stop most hairs before them get into your pipes, collect them around it and maximize hair snaring. This will help keep your drain clear.

WIDELY USED SNAP-IN SHOWER DRAIN GRID: This shower drain cover can fits Cast Iron and Plastic Shower Drain , as well as the Clay Tile Pipes.

EASY TO USE & INSTALL: The prongs of this Snap-In SHOWER DRAIN Grate can be adjusted fit whatever drain, you can easy to install with just a snap, No Tools DIY Installation, Do not use plumber's putty for installation.

KEEP YOUR DRAIN CLEAR: This useful accessory helps keep unwanted debris and foreign objects out of your drain pipes. It will stop most hairs before them get into your pipes, collect them around it and maximize hair snaring. This will help keep your drain clear.

HIGH QUALITY MATERIAL AND ANTI-FLAKED OFF COATING: Artiwell Tip-Toe Tub Trim Set Coming with High Quality Brass , Zinc and ABS Construction ,designed for Long-Lasting Durability, improving coating technology to improve anti-flaked off performance ,withstands longer lasting soaking in water.

STANDARD DESIGN: The Threaded Adapter Bushing Fits 1-1/2" and 1-3/8" Drain Shoe Sizes. This Drain can fit both 1-1/2" coarse thread and 1-5/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-5/8" Fine thread.

TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional and national industry standards. We are proud of the products we sell, you will be too.

PERFECT DRAIN ASSEMBLY: Artiwell pop up drain assembly with Overflow Fits bathroom vanity sink with drain hole diameter of 1-1/2” or 1/3/4” , Compatible with various lavatory sink faucets.

INSTALLATION INSTRUCTIONS: Artiwell pop up drain assembly is very easy to install , We provide clear step-by-step instructions with pictures to guide you through the installation process ,Please make sure the gaskets are in the right position (please refer to product pictures or instructions) to avoid leakage.

TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced and certified to regional, national and international industry standards. We are proud of the products we sell, you will be too.

STANDARD DESIGN: Designed to fit most tub and baths with the threaded adapter bushing fitting 1-1/2 inch ,1-3/8” inch and 1-7/8” in bath shoe sizes. This Drain can fit both 1-1/2" coarse thread and 1-3/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-3/8" Fine thread.

FULL ACCESSORIES PROVIDED: Trip lever faceplate with 2 screws , Beehive strainer with screw, 1-3/8 in. Npsm (1-5/8 in. - 16 UNC) fine thread strainer body, 1-1/2 in. -11. 5 in. Npsm coarse thread adapter bushing, strainer washer and Brass Pin for connect the overflow faceplate and linkage(not included).

TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional, national industry standards. We are proud of the products we sell, you will be too.