Tools & Home Improvement From AR-PRO on Amazon

Liphontcta The Exact Replacement 585195MA Worm Bracket for Snow Throwers (Black) - Compatible with Murray Snow Throwers and Craftsman Gas Snow Blowers - Restore Snow Thrower Peak Performance

Ratings for AR-PRO (CPR Score)

(2-Pack) AR-PRO 6” x 1.5” Flat Free Solid Rubber Wheel Assemblies - Replacement Hand Truck Wheels with Ball Bearings and 1/2” Bore Hole Diameter - Heavy-Duty Solid Rubber Wheels 132 lbs Load Capacity

Ratings for AR-PRO (CPR Score)

Features

AR-PRO 6” X 1.5” FLAT FREE SOLID RUBBER WHEEL ASSEMBLIES - These sets of flat-free wheel assemblies have nominal dimensions of 6 inches (outer diameter) and 1.5 inches (width). The actual dimensions are 6 inches outer diameter, 1.43 inches overall width, and 1.02 inches tread width.

REPLACEMENT HAND TRUCK WHEELS WITH BALL BEARINGS AND 0.5” BOREHOLE DIAMETER - These wheel assemblies come in different sizes, but these 6-inch tires and wheels are one of the most common sizes for hand trucks, trolleys, dollies, and wheeled garden equipment. The set fits with a 0.5-inch axle shaft that requires a centered hub. Double-sealed bearings allow for minimal rotation friction for better maneuverability, especially hand trucks and garden carts.

Show More

(8 Pack) Hard-to-Find Spring Steel Push-On Pushnuts - Dolly Wheel Lock Washers Fits 5/8" Dolly Axle Rods with Oiled Phosphate Finish

Ratings for AR-PRO (CPR Score)

Features

HIGH-QUALITY SPRING STEEL PUSH-ON PUSHNUTS FOR LOW TORQUE APPLICATIONS - These pushnuts may not look that much with their .02-inch thickness and simple design but they are one of the most efficient ways to keep wheels in place for low-torque outdoor equipment like dollies, hand carts, and lawn wagons.

PERFECT ALTERNATIVE FOR PINS AND WASHERS - Same function but one is more efficient. These pushnuts have teeth that slide into the stud with a ratcheting action, only allowing the pushnuts to move in one direction and resist moving to the opposite direction.

Show More

(2-Pack) AR-PRO 10''x2.5'' Flat Free Solid Rubber Replacement Tires, Flat-Free Tires for Hand Trucks and Wheelbarrows with 10” Tires with 5/8" Axles

Ratings for AR-PRO (CPR Score)

Features

FLAT FREE SOLID RUBBER REPLACEMENT TIRES - Flats are inevitable, or are they? These solid rubber tires will remove the hassle of flat tires so that you can keep going without worries! These solid rubber tire and wheel assembly fit vehicles and equipment with 10-inch tires with 4-inch rims, 5/8-inch axles, a offset hub, and a tire width between 1.50 inches and 2.10 inches. It’s a guaranteed fit!

FLAT-FREE TIRES FOR HAND TRUCKS, WHEELBARROWS, AND MORE - Versatility and dependability are the two key selling points of AR-PRO’s flat-free tire and wheel assemblies. They are highly compatible replacement tires for dollies, trolleys, hand trucks, lawnmowers, wheelbarrows, yard trailers, wagons, snow blowers, pressure washers, air compressors, and other utility equipment.

Show More

(2 Pack) Exact Replacement for InSinkErator STP-PL/STPPL Black Rubber Sink Stopper for Garbage Disposal – Compatible with Standard 3-1/2" Drains from Kohler, Waste King, Whirlpool, and More

Ratings for AR-PRO (CPR Score)

Features

EXACT REPLACEMENT INSINKERATOR STP-PL/STPPL KITCHEN SINK STOPPER - This sink stopper is of OEM quality at a more affordable price. It's an exact replacement for InSinkErator STP-PL Sink Stopper. Each replacement part undergoes strict in-house testing for quality and OEM specification matching.

UNIVERSAL FIT FOR 3 1/2-INCH SINK DRAINS - Designed to be compatible with standard sink drains, these sink stoppers are guaranteed to fit 3 1/2-inch drains from Badger, Kohler, Waste King, Whirlpool, Kitchenaid, and even any standard sink without an in-sink garbage disposal unit.

Show More

AR-PRO (2- Pack) Run-Flat Solid Rubber Replacement Tire 8" x 2'' with a 5/8" axle for Hand Trucks, Wheelbarrows, Dollies, Trolleys and More – Run Flat with 580 lbs Max Load

Ratings for AR-PRO (CPR Score)

Features

THE PERFECT REPLACEMENTS: AR-PRO offers the perfect solid rubber replacement tires for vehicle with about 7.8” tires that is about 2.13’’ wide (This is everything you need to replace your dolly’s wheels) like lawn mowers, hand trucks, wheelbarrows, yard trailers, dollies, trolleys, wagons, snow blowers, persuure washers, air compressors, generators, go carts, wood chippers and more – guaranteed fit.

MADE HEAVY DUTY FROM QUALITY MATERIALS: Our tires are made from premium steel and 100% natural rubbers, it’s our job to make dependable and durable tires and we do it right. Count on AR-PRO.

Show More

AR-PRO (2-Pack) 10''x2.5'' Flat Free Solid Rubber Replacement Tires - Flat-Free Tires for Hand Trucks and Wheelbarrows with 10” Tires with 5/8" Axles

Ratings for AR-PRO (CPR Score)

Features

FLAT FREE SOLID RUBBER REPLACEMENT TIRES - Flats are inevitable, or are they? These solid rubber tires will remove the hassle of flat tires so that you can keep going without worries! These solid rubber tire and wheel assembly fit vehicles and equipment with 10-inch tires with 4-inch rims, 5/8-inch axles, a offset hub, and a tire width between 1.50 inches and 2.50 inches. It’s a guaranteed fit!

FLAT-FREE TIRES FOR HAND TRUCKS, WHEELBARROWS, AND MORE - Versatility and dependability are the two key selling points of AR-PRO’s flat-free tire and wheel assemblies. They are highly compatible replacement tires for dollies, trolleys, hand trucks, lawnmowers, wheelbarrows, yard trailers, wagons, snow blowers, pressure washers, air compressors, and other utility equipment.

Show More

5-Set T Slot Nuts/Rail Nuts Compatible with 05-18 Tacoma & Tundra Bed Deck Rail, Perfectly Fit and Made from Steel with Black Oxide Finish to Resist Rust

Ratings for AR-PRO (CPR Score)

Features

These T-slot nuts are perfectly compatible with bed rails in both for Tundra (2007-2018) and for Tacoma (2005-2018), but also work with a variety of other pickup trucks with compatible bed rails. When it comes to securing items in your truck bed, more tie down points are generally better.

Base Measurements: 1-1/8" long x 7/8" wide x 11/32" high. Our T slot nuts would securely fit into the deck/side rails of both Tacoma's and Tundra's so one can mount extra custom cleats, tie downs, d-rings, bike racks and more!

Show More

11.5" x 11.5" Off-Road Hi-Lift Jack Base and Stabilizer - Keep Jacks from Sinking with Heavy-Duty Plastic Jack Stand Base for Lifting Jacks and Farm Jacks with 4.1" x 7" Base

Ratings for AR-PRO (CPR Score)

Features

Watching the jack constantly sinking on the ground is one of the most frustrating feelings in the world so is trying to work on a jack that can't just get traction on the muddy and slippery ground. But there's no reason to just grin and bear it. This Hi-Lift Jack Base and Stabilizer serve a simple yet vital purpose of stabilizing off-road jacks. Mount your Hi-Lift jack on the base and watch it conquer sand, gravel, mud, and snow!

MEETS OEM SPECIFICATIONS - OEM-quality with an affordable price. This jack stand base meets and even exceeds both OEM and Hi-Lift Jack specifications on strength, durability, and safety.

Show More

1-1/2" Heavy Duty Plastic Patio Cups, Patio Chair Glides Replacement (48-Pack) for Outdoor Wrought Iron Furniture Legs – Help Shield Both Furnitures and The Floor – for Up to 12 Chairs or Tables

Ratings for AR-PRO (CPR Score)