Automotive From Alltooetools on Amazon

It has a jaw opening of 1-3/8 inches to 5-5/8 inches (35mm to 142mm) and a throat clearance of 5-7/8 inches (150mm).

This engine valve spring compressor is designed with a direct action compressor lever which gives better visibility of valve spring retainers located in difficult or hard to reach areas.

Alltooetools tools has 10 different collets, split collet type collets are made from chrome molybdenum steel turn and they expand to grip the inner bearing race, fit a wide range of applications.

【Feature】 Include: 1 x sliding hammer, 1 x 2.5 jaws puller, 3 x screw adaptors, 1 x counter stay puller. Thread: M10 x 1.5, M10 x 1.5 to M8 x 1.25, M10 x 1.5 to M6 x 1.0. 10 x Collects (segment grip type): 8-11mm, 12-17mm, 18-23mm, 24-29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, 54-58mm.

HOW THE BRAKE PISTON WORK -- This cube tool rotates pistons back into brake calipers when replacing brake pads on vehicles with rear wheel disc brakes; It removes and installs disc brake pistons, realigns piston slots to the back of the brake pad, and rotates the piston back into the caliper.

STRONG CONSTRUCTION & DURABLE TO USE -- The whole brake body is made from carbon steel,very sturdy and durable for extra strength and longevity, and you can use it on many universal vehicles with 4 wheels.

EASY TO USE -- An indispensable component of brake system, easy to install and you can operate it easily. Can be used on universal vehicles with 4 wheel disc brakes, fit most domestic and some import applications.

Compatible with Volvo C30, C70, S40, S60, S70, S80, V40, V50, V60, V70, XC60, XC70 & XC90 Focus.

Reference OEM Tool: 999 5433

Long handle enables technician to easily hold the pulley when tightening or loosening retaining bolts.

Wrench is adjustable from 1.5" to 8.7".

NOTICE: 2 kinds of packages are shipped randomly: 1 Blue case: 22.13*3.74*2.16inch; 2 Red case: 28.15*3.74*2.16inch.

【Suitable】Use with any banding up to 2/5 inch (10mm) in width. Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses. Also use to secure late model GM CVJ. Plier works on steering gear gaiters and fuel hoses on compatible with VAG, compatible with Opel, compatible with BMW, compatible with Mercedes Benz, compatible with Honda, compatible with Nissan, compatible with Mazda, and more.

★Constructed of premium materials, this vacuum carburetor synchronization balancer gauge carb synchronizer adjustment tool kit is built for strength, durability, and longevity; Metal construction and glass lens make the carburetor synchronizing gauges durable and easy to read; the carburetor adjustment gauge dials are mounted to a heavy metal base that can be mounted on a table or post, or hung in your garage for easy use.

★ATTENTION!!! Before each use, make sure all the gauges are calibrated to 0. If the needle on the gauge is not pointed at 0. Open the metal cap, and use a flat head screwdriver to rotate the screw on the gauge face to adjust the pointer to 0 or the position desired.

【Feature】Synchronizer Gauges: includes 4 synchronizer gauges 1/2" with fixed plates (vacuums) and 4 rubber pipes 8mm x 5mm x 750mm. /Extension and Connector Tubes: includes 4 extension tubes 3.9 x 52mm, 4 tubes 3.9 x 122mm, and 8 tubes with conical type connectors 8mm x 40mm. /Additional Tubes: includes 4 tubes 10mm x 53mm (M6 x 0.75) and 4 tubes 10mm x 60mm (M6 x 1.0).

Camshaft, crankshaft and flywheel pins are also suitable for many other petrol and diesel Ford engines.

The kit covers later duratec petrol engine,it includes revised design camshaft setting plate and tensioner pulley locking pin.

And also covers the completed range of Ford duratec engine 1.25 through 2.0 16v in the both belt and chain drive variant.

【Feature】OEM Codes: A) Crankshaft Pulley Alignment Tool EN-48585. B) Flywheel Holding Tool + Base (Including Screws & Washers) EN-43653/J43653. C) Tensioner Retaining Pin 2.5mm EN-955-10/KM955. D) Tensioner Locating Pin 4.0mm EN-955-20/KM955-20 E) Tension Plunge.

【Suitable】Suitable: Vauxhall, Opel, Saab and Chevrolet 2008-2015. Engine codes: LHU/A20NFT, LTG/A20NHT, LDK/A20NHT, LE5/LE9, A24XE, A24XF

Compatible with Volvo: C30 (06-12), S40 (06-12), S80 (07-11), V50 (04-12), V70 (07-11).

Engine Codes: AOBA, AOBC, AODA, AODB, AODE, AOWA, AOWB, B4184S8, B4184S11, B4204S3, B4204S4, CDBB, CGBA, CGBB, CHBA, CHBB, CJBA, CJBB, CSDA, CSDB, GZFA, GZFB, GZFC, N4JB, Q7DA, QQDA, QQDB, QQDC, SEBA, SEWA, SYDA, TBBA, TBBB, TBWA, TBWB.

Product integral molding (non-welding process, welding is easy to damage).