Tools & Home Improvement From ALITOVE on Amazon

【Equipped with ALT-connector】 Based on customers’ feedback, we upgrade the 3pin JST connectors to waterproof 3pin ALT-connectors, which is designed for outdoor use. Multiple strings can be connected to extend length. We also present a male ALT-connector with bare wire which makes it convenient to be connected to different controller ports. Also comes with four T-Style power injection connectors in case of voltage drop.

【Support many controllers】 It can be compatible with Arduino, Raspberry Pi, T1000S, K1000C programmable SPI controllers. It can also be controlled by ALT-C01, SP105E Bluetooth controllers, SP107E music controller, SP108E WiFi controller, SP602E, SP608E multi-channels Bluetooth controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on. To let it work, you need power supply and controller, which is not included in the package.

【Precaution】 The connectors of different brands may not be the same. Please confirm compatibility before buy. If you need additional 3Pin ALT-connectors, power injectors and extension cable which is compatible with ALITOVE string lights, please search them on amazon with these ASIN: B09CDQWTFG,B09KMPW1WW, B09KGVKBJV

Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.

Enough 120W output power and 24V stable output voltage will protect your electronic products from destruction.

It is perfect for LED Strip Light, Wireless Router, ADSL Cats, HUB, Switches, Security Cameras, Audio/ Video Power Supply.

【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.

【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

Voltage consistency: There is no voltage fluctuations at power on, during transmit, receive, or at power off. It will protect your electronic products from destruction.

It comes with a free female DC connector. So you can easily connect wires on it without soldering.

Great for LED Strips, 3D Printer, ham radio transceiver, CCTV cameras，car subwoofer amp, audio amplifier, wireless router, ADSL Cats, HUB, audio/ video power supply. Indoor use only!

【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.

【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

【Flexible Design & Cut freely】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY.

【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included.

【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months free warranty. We always stand behind our products.

【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.

【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

【Equipped with ALT-connector】 Based on customers’ feedback, we upgrade the 3pin JST connectors to IP68 waterproof 3pin ALT-connectors, which is designed for outdoor use. Multiple strings can be connected to extend length. We also present a male ALT-connector with bare wire which makes it convenient to be connected to different controller ports. Also comes with two T-Style power injection connectors in case of voltage drop.

【Support many controllers】 It can be compatible with Arduino, Raspberry Pi, T1000S, K1000C programmable SPI controllers. It can also be controlled by ALT-C01, SP105E Bluetooth controllers, SP107E music controller, SP108E WiFi controller, SP602E, SP608E multi-channels Bluetooth controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on. To let it work, you need power supply and controller, which is not included in the package.

【Precaution】 The connectors of different brands may not be the same. Please confirm compatibility before buy. If you need additional 3Pin ALT-connectors, power injectors and extension cable which is compatible with ALITOVE string lights, please search them on amazon with these ASIN: B09CDQWTFG,B09KMPW1WW, B09KGVKBJV

【User-friendly Design】Designed with 3pin JST-SM connectors on both ends for hooking up. Separate power/ground wires on both ends for injecting power. Covered by silicone coating, waterproof IP65. Each group can be cut and welded freely along the cutting line to meet different length requirements.

【3M VHB Heavy-duty Foam Tape】Based on buyers’ feedback on adhesive issue, we upgraded the tape to 3M VHB heavy duty foam mounting tape. It is much more sticky and durable than hot-melt tapes which is widely used by other brands' LED Strips.

【Wide Application】 It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, wedding party lighting, home and car decoration, city skyline, building outline and so on.

【Rich Color Modes】 180 kinds of multi-color dynamic modes, 8 kinds of single color modes such as meteor, breathing, wave, catch-up, stack, flash, flow, static. Color, brightness and speed are adjustable.

【Capture image’s color you like】The WiFi controller features creative from-image-to-effect function. It can capture the color of image, create distinctive color effect and synchronize light color with atmosphere of your room.

【User-friendly design】 Support setting pixels number and segments number, control up to 2048 pixels in total. Save user setting when power off. DC 5V~24V wide working voltage; reverse connection protection; hot swap protection