Home & Kitchen From ALITOVE on Amazon

【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.

【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.

【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

Safety features: Automatic overload protection, over-voltage protection, over-current protection, over-temperature protection, short circuit protection. Meet FCC CE 3C safety standard and RoHS environment standard.

Sufficient 120W output power and 24V stable output voltage will protect your electronic devices from destruction. We recommend the max use less than 80% of the full loads.

Widely used to drive LED strip light, DC Pump, water purifier, CCTV camera, LCD monitor, massage chair, DC motor, DC bump and other 24V devices less than 120W.

Warm Tips: Generally speaking, the greater the power of the power supplyies, the larger its size,and the more expensive it will be. Therefore, if 24V 6A power supply is cheaper and smaller than ALITOVE 24V 5A power supply, maybe its actual power is smaller than the advertised power. ALITOVE 24V 5A power Supply has been sold on Amazon since 2016, and the durability and after-sales will be more guaranteed. Please compare more before buying products, don't be cheated.

【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.

【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

【10m Continuous Length, NO Voltage Drop】It is designed with 24V DC input and 10m continuous length. Even if all the 600LEDs are turned on full white, no voltage drop. You don’t need to inject power on the other ends. Perfect for large lighting project such as city skyline lighting,building outline decoration, hotel, KTV, bars, etc.

【Wide Compatibility】It is compatible with Arduino, Raspberry Pi,T1000S,K1000C etc programmable controllers. Support SP105E SP108E SP110E app controllers, SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers. app controllers, SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers.(Controller not included)

【User-friendly Design】Designed with 3pin JST-SM connectors on both ends for hooking up. Separated power/ground wires on both ends for injecting power. Covered with silicone weatherproof sheathing, waterproof IP67. Each group can be cut and welded freely along the cutting line to meet different length requirements. Attached clips and screws make it easy to install.

【Equipped with ALT-connector】 Based on customers’ feedback, we upgrade the 3pin JST connectors to IP68 waterproof 3pin ALT-connectors, which is designed for outdoor use. Multiple strings can be connected to extend length. We also present a male ALT-connector with bare wire which makes it convenient to be connected to different controller ports. Also comes with two T-Style power injection connectors in case of voltage drop.

【Support many controllers】 It can be compatible with Arduino, Raspberry Pi, T1000S, K1000C programmable SPI controllers. It can also be controlled by ALT-C01, SP105E Bluetooth controllers, SP107E music controller, SP108E WiFi controller, SP602E, SP608E multi-channels Bluetooth controllers and any other WS2811 SPI controllers.

【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on. To let it work, you need power supply and controller, which is not included in the package.

【Precaution】 The connectors of different brands may not be the same. Please confirm compatibility before buy. If you need additional 3Pin ALT-connectors, power injectors and extension cable which is compatible with ALITOVE string lights, please search them on amazon with these ASIN: B09CDQWTFG,B09KMPW1WW, B09KGVKBJV

【Safe to Use】 New generation 24V LED strip, much brighter than old 12V LED strip and much safer than 110V LED strip. Touchable to children.To let it work, you need a 24V DC Power supply, which is not included.

【Waterproof IP67】 The LED strip is put in clear PVC tube, which protects it very well from water & dust and makes it easy to clean. It will work well outdoor, even in extreme weather such as rainstorms.

【Cut and Bend Freely】 It can be cut off between every 6 LED without damaging the rest strip. Soft and flexible. You can cut it to any length and bend it to any shape to meet your requirements.

【User-friendly Design】 With 3pin JST-SM connectors and separate power/ground wires on both ends, you can easily hook up several strips together to extend length and inject power in case of voltage drops. It gives out light on two sides, one with a large luminous area and the other one narrower.

【Support Many Controllers】It can be programmed with T1000S, K1000C etc. Support SP105E SP108E SP110E SP601E app controllers, SP106E SP107E music controllers, SP501E and MHCTRWF12V smart WiFi Controllers. Also compatible with Raspberry pi and Arduino micro-controller. (Controller and power supply is not included. )

【Wide Application】 It can be used to make LED neon letters,under-cabinet light, under-bed light, night light, TV or monitor backlight and widely applied to game room，hotel, KTV, bars, wedding party, home theater, city skyline, building outline decoration, and so on.

【Flexible Design & Cut freely】 Using flexible copper circuit board, you can gently bend to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. This ALITOVE strip lights can be cut between every 3 LEDs along the cutting marks to fit for the length requirement of your project, great for DIY.

【Two Different Power Input Ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. Please don’t inject power to both ends at the same time. (The power supply is not included.)

【Waterproof IP67】 The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well outdoor, even in extreme weather such as rainstorms.

【Cut and Bend Freely】 It can be cut off between every 6 LED without damaging the rest strip. Soft and flexible. You can cut it to any length and bend it to any shape to meet your requirements.

【We Stand behind Our Product】 24 months free warranty, free replacement or full refund. If there is any issue, please feel free to contact us. We will reply in 12 hours. To let it work, you need a 24V DC Power supply, which is not included.