Sports & Outdoors From Affordura on Amazon

Adjustable length- You don’t need to order the extra tow rope. The custom tow rope is 60 ft. long with 4 sections you can take out to adjust the length. You can choose to have 50 or 60 feet of line behind the boat to tow the towables for boating, it has 4100 pound tensile strength and is designed for all 1 to 4 person boat towables.

Tubing helper- Helps to keep the rope drag to a minimum and reduce tube submarining. The boat towable ball helps to absorb rope snap to an extent, pulls much smoother and better.

Easily inflate- Comes with a one way valve with 2 caps to easily inflate and deflate. Please note that tightly covered after finishing the inflation.

Easily inflated- If you tired of boat bumpers marine that get flat or deflate, you'll be glad to find these have valves for inflation. You can be in charge of the pressure you desire, very handy to use and take only 35 seconds to inflate.

Rule of size and quantity- A boat fenders inflatable should have 1 inch of diameter for every 4 to 5 foot of boat length. If you are going to be docking in harsh conditions such as an open lake prone to high winds, larger boat fenders is more recommended. Place one docking fender at every 10 foot of waterline, with a minimum of 3 fenders along one side.

Easily storage- You can optionally deflate or inflate to storage all of parts in the bag, fit perfectly under seats or inside storage compartments.

Easily storage- Instead of the smaller PWC bumper pad, Affordura update to the larger size: 14x6x3.2 inch. Thick enough to protect the sides of the boat while docked even in rough waters, small enough that they stow easily under the front of ski hatch when not in use.

Quickly install- Install in seconds, just on and off. The hook on the back of PWC fender guards grabs the rail of the ski and you can pull it nice and tight so it doesn’t move, made of heavy duty plastic rather than rubber coated metal to minimize scratching on the jet ski.

Well protection- Save the PWC from scratches and prevents it from bumping directly into the dock side. “Fold” design allows PWC bumper guards to sit on the rail of the PWC so that it can protect both the upper and lower side.

Quick connector- Comes with a quick attachment, a must for water tubes for boats. Only takes 50 seconds to settle down. Easy and quick to attach the rope, easy to lift up onto the back of your boat. Just slip through the rope to the hole and makes a knot. It will stay tight until you easily undo ti yourself.

Higher front- The ski tube is higher in the front and is thinner so you don’t have to worry about the initial diving under as the boat takes off as well. The low profile at the back coupled with 2 handles make it easier to climb into without tipping. It was a big help to some new tubers.

Boston valve- Comes with a Boston valve for easy inflation which is connected to a larger removable piece. Quicker to inflate and deflate than other valves. It’s a one-way valve with two caps. The valve let’s air in, but won’t let any air escape to the boat towables except you screw tightly the cap.

Finest material- Compression Foam Padding, 28 oz. Marine Grade Embossed Vinyl.

How to maintain- Only use mild and specialized clears. If you have stains that won’t come out, you can try using a Magic Erase by carefully rubbing it over the stain in a circular motion.

Thick padding- Provide a pretty good amount of support and enough cushioning to your backside and bottom. You will not feel any pain and numbness. The extra high back for support is great for fishing or traveling.

How to maintain- Only use mild and specialized clears. If you have stains that won’t come out, you can try using a Magic Erase by carefully rubbing it over the stain in a circular motion.

Holding well- Captains boat seat keeps your bum from sliding around, which reduces or even eliminates the need to re-center your body. By keeping your body in place and ensuring all controls are within reach and can be manipulated without fuss. And designed with a flip-up bolster, so you can sit, stand, or use it as a leaning post.

Thick padding- Provide a pretty good amount of support and enough cushioning to your backside and bottom. You will not feel any pain and numbness. The extra high back for support is great for drivers and passengers.

Entirely adjustable- Easy to install without any tools. Comes with built in key to tighten or loosen, just clamp and go, suitable for any flag pole, stern, bimini, boat top between 0.08-1.4 inch. Also, suitable for many boat flags.

Durable material- 100% Polyester marine flags for boats, resists fading and dries quickly. Individually embroidered 50 stars, 4 rows of stitching on the end and double brass grommets made for outdoor or any harsh marine environment.

Fly proudly- When in US waters, show off your patriotism. The stitching and bright colors are appealing to the eyes, fly the boat American flag proudly every time you’re on the water. Pontoon boat flag size should be about one inch for each foot of overall boat length.

Wakeboard flag- Perfect for safety when boating and easy for other boaters to know that someone in the water, such as waterski, wakeboard, or swimming behind your boat. Handle long enough so you no need to raise your hand in the air.

Lawful boat flag- Conforms to AZ, CA, CO, ID, MO, NE, NM, OR, TX, UT & WA laws. Use the orange flag for boat to add great visibility is highly recommended when you need other boaters to see even if you are not in these states.

Floating foam padding- Thicker foam padding to support floatation and adds more comforts when you hold, perfectly fit into the built in rod holders and prevents rattling.

Entirely adjustable- Easy to install without any tools needed. Comes with built in key to tighten or loosen, just clamp and go, suitable for any flag pole, stern, bimini, boat top between 0.8-1.4 inch.

Durable material- 100% Polyester marine flags for boats, resists fading and dries quickly. Individually embroidered stars, 4 rows of stitching on the end and double brass grommets made for harsh marine environment.

Fly proudly- The yacht ensign flag is now flown as a matter of custom as an alternative to the national ensign by recreational craft sailing in U.S. territorial waters, it also tells you which way the wind is blowing. EVERY US Boater needs at least one of these to fly. Boat cabin flag size should be about one inch for each foot of overall boat length.

Handle floating - Three floating handles included, engineered with EVA grip and pencil floats to support floatation, keep your wake board rope away from propellers and make it easy to retrieve.

Two-handle - 12.2 in. double-density EVA PHAT GRIP handle and 6.3 in. TPR covered aluminum handle, 6MM thicker EVA than others, no worried about any hand tearing or worn. The extra handle makes the wakeboard tow rope easy to do 360's or "wrap" tricks. Nice for the handle to be able to transfer from rope to rope.

Material - Low stretch 16-strand 30-filament with nothing in the middle, tough enough with no discernible stretching and no wear showing. Bright red color makes kneeboard rope easy to see in the water when circling around a skier in the water and the handle.